319
Views
7
CrossRef citations to date
0
Altmetric
Articles

Performance characteristics of a photovoltaic panel integrated with PCM packed cylindrical tubes for cooling

&
Pages 444-468 | Received 21 Dec 2020, Accepted 27 Jun 2021, Published online: 15 Jul 2021

References

  • Agyenim, F., N. Hewitt, P. Eames, and M. Smyth. 2010. “A Review of Materials, Heat Transfer and Phase Change Problem Formulation for Latent Heat Thermal Energy Storage Systems (LHTESS).” Renewable and Sustainable Energy Reviews 14: 615–628.
  • Akbarzadeh, A., and T. Wadowski. 1996. “Heat Pipe-Based Cooling Systems for Photovoltaic Cells Under Concentrated Solar Radiation.” Applied Thermal Engineering 16: 81–87.
  • Ali, M., M. H. Iqbal, N. A. Sheikh, H. M. Ali, M. S. Manzoor, M. M. Khan, and K. F. Tamrin. 2017. “Performance Investigation of Air Velocity Effects on PV Modules Under Controlled Conditions.” International Journal of Photoenergy, 1–10, Article ID 3829671.
  • Amr, A. A., A. A. M. Hassan, M. Abdel-Salam, and A. M. El-Sayed. 2019. “Enhancement of Photovoltaic System Performance via Passive Cooling: Theory Versus Experiment.” Renewable Energy 140: 88–103.
  • Atkin, P., and M. M. Farid. 2015. “Improving the Efficiency of Photovoltaic Cells Using PCM Infused Graphite and Aluminium Fins.” Solar Energy 114: 217–228.
  • Bahaidarah, H., A. Subhan, P. Gandhidasan, and S. Rehman. 2013. “Performance Evaluation of a PV (Photovoltaic) Module by Back Surface Water Cooling for Hot Climatic Conditions.” Energy 59: 445–453.
  • Bayrak, F., H. F. Oztop, and F. Selimefendigil. 2019. “Effects of Different fin Parameters and Efficiency for Cooling of PV Panels Under Natural Convection.” Solar Energy 188: 484–494.
  • Buddhi, D., N. K. Bansal, R. L. Sawhney, and M. S. Sodha. 1988. “Solar Thermal Storage Systems Using Phase Change, Materials.” International Journal of Energy Research 12: 547–555.
  • Ceylan, I., A. Gurel, H. Demircan, and B. Aksu. 2014. “Cooling of a Photovoltaic Module with Temperature Controlled Solar Collector.” Energy and Buildings 72: 96–101.
  • Chandel, S. S., and T. Agarwal. 2017. “Review of Cooling Techniques Using Phase Change Materials for Enhancing Efficiency of Photovoltaic Power Systems.” Renewable and Sustainable Energy Reviews 73: 1342–1351.
  • Chandrasekar, M., and T. Senthilkumar. 2016. “Passive Thermal Regulation of flat PV Modules by Coupling the Mechanisms of Evaporative and fin Cooling.” Heat and Mass Transfer 52: 1381–1391.
  • Choubineh, N., H. Jannesari, and A. Kasaeian. 2019. “Experimental Study of the Effect of Using Phase Change Materials on the Performance of an Air-Cooled Photovoltaic System.” Renewable and Sustainable Energy Reviews 101: 103–111.
  • Darkwa, J., J. Calautit, D. Du, and G. Kokogianakis. 2019. “A Numerical and Experimental Analysis of an Integrated TEG-PCM Power Enhancement System for Photovoltaic Cells.” Applied Energy 248: 688–701.
  • Deaver, F. K., and M. W. Edenburn. 1983. “Passive Cooling Measurements for a Concentrating, Photovoltaic Array.” ASME Journal of Solar Energy Engineering 150: 413–417.
  • Do, K. H., T. H. Kim, Y. Han, B. Choi, and M. Kim. 2012. “General Correlation of a Natural Convective Heat Sink with Plate-Fins for High Concentrating Photovoltaic Module Cooling.” Solar Energy 86: 2725–2734.
  • Duffie, J. A., and W. A. Beckman. 2013. Solar Engineering of Thermal Process. Wiley, U.S.A.
  • Ebrahimi, M., M. Rahimi, and A. Rahimi. 2015. “An Experimental Study on Using Natural Vaporization for Cooling of a Photovoltaic Solar Cell.” International Communications in Heat and Mass Transfer 65: 22–30.
  • Elshafei, E. A. M. 2010. “Natural Convection Heat Transfer from a Heat Sink with Hollow/Perforated Circular Pins.” Energy 35: 2870–2877.
  • Furushima, K., and Y. Nawata. 2006. “Performance Evaluation of Photovoltaic Power-Generation System Equipped with a Cooling Device Utilizing Siphonage.” ASME Journal of Solar Energy Engineering 128: 146–151.
  • Grubisic-Cabo, F., S. Nizetic, D. Coko, I. M. Kragic, and A. Papadopoulos. 2018. “Experimental Investigation of the Passive Cooled Free-Standing Photovoltaic Panel with Fixed Aluminum Fins on the Backside Surface.” Journal of Cleaner Production 176: 119–129.
  • Hachem, F., B. Abdulhay, M. Ramadan, H. El-Hage, M. G. El-Rab, and M. Khaled. 2017. “Improving the Performance of Photovoltaic Cells Using Pure and Combined Phase Change Materials e Experiments and Transient, Energy Balance.” Renewable Energy 107: 567–575.
  • He, B., and F. Setterwall. 2002. “Technical Grade Paraffin Waxes as Phase Change Materials for Cool Thermal Storage and Cool Storage Systems Capital Cost Estimation.” Energy Conversion and Management 43: 1709–1723.
  • Ingersoll, J. G. 1986. “Simplified Calculation of Solar Cell Temperatures in Terrestrial Photovoltaic Arrays.” ASME Journal of Solar Energy Engineering 108 (2): 95–101.
  • Joo, Y., and S. J. Kim. 2015. “Comparison of Thermal Performance Between Plate-Fin and Pin Fin Heat Sink in Natural Convection.” International Journal of Heat and Mass Transfer 83: 345–356.
  • Khanna, S., K. S. Reddy, and T. K. Mallick. 2018. “Optimization of Finned Solar Photovoltaic Phase Change Material (Finned Pv-pcm) System.” International Journal of Thermal Sciences 130: 313–322.
  • Kousksou, T., A. Jamil, T. El Rhafiki, and Y. Zeraouli. 2010. “Paraffin Wax Mixtures as Phase Change Materials.” Solar Energy Materials & Solar Cells 94: 2158–2165.
  • Krauter, S. 2004. “Increased Electrical Yield via Water Flow over the Front of Photovoltaic Panels.” Solar Energy Materials & Solar Cells 82: 131–137.
  • Kyriaki, E., C. Konstantinidou, E. Giama, and A. M. Papadopoulos. 2017. “Life Cycle Analysis (LCA) and Life Cycle Cost Analysis (LCCA) of Phase Change Materials (PCM) for Thermal Applications: A Review.” International Journal of Energy Research 42:, 3068–3077.
  • Nada, S. A., and D. H. El-Nagar. 2018. “Possibility of Using PCMs in Temperature Control and Performance Enhancements of Free Stand and Building Integrated PV Modules.” Renewable Energy 127: 630-641.
  • Nada, S. A., D. H. El-Nagar, and H. M. S. Hussein. 2018. “Improving the Thermal Regulation and Efficiency Enhancement of PCM Integrated PV Modules Using Nano Particles.” Energy Conversion and Management 166: 735–743.
  • Nasef, H. A., S. A. Nada, and H. Hassan. 2019. “Integrative Passive and Active Cooling System Using PCM and Nanofluid for Thermal Regulation of Concentrated Photovoltaic Solar Cells.” Energy Conversion and Management 199: 112065.
  • Nizetic, S., M. Arıcı, Feyza Bilgin, and F. Grubisic-Cabo. 2018. “Investigation of Pork fat as Potential Novel Phase Change Material for Passive Cooling Applications in Photovoltaics.” Journal of Cleaner Production 170: 1006–1016.
  • Nizetic, S., D. Coko, A. Yadav, and F. Grubišić-Čabo. 2016. “Water Spray Cooling Technique Applied on a Photovoltaic Panel: The Performance Response.” Energy Conversion and Management 108: 287–296.
  • Popovici, C. G., S. V. Hudișteanu, T. D. Mateescu, and N. Cherecheș. 2016. “Efficiency Improvement of Photovoltaic Panels by Using Air Cooled Heat Sinks.” Energy Procedia 85: 425–432.
  • Radwan, A., S. Ookawara, and M. Ahmed. 2016. “Analysis and Simulation of Concentrating Photovoltaic Systems with a Microchannel Heat Sink.” Solar Energy 136: 35–48.
  • Sainthiya, H., N. S. Beniwal, and N. Garg. 2018. “Efficiency Improvement of a Photovoltaic Module Using Front Surface Cooling Method in Summer and Winter Conditions.” ASME Journal of Solar Energy Engineering 140: 1–7, 061009.
  • Saxena, A., N. Agarwal, and E. Cuce. 2020. “Thermal Performance Evaluation of a Solar air Heater Integrated with Helical Tubes Carrying Phase Change Material.” Journal of Energy Storage 30: 101406.
  • Saxena, A., N. Agarwal, and G. Srivastava. 2013. “Design and Thermal Performance of a Solar Air Heater with Long Term Heat Storage.” International Journal of Heat and Mass Transfer 60: 8–16.
  • Saxena, A., and N. Deval. 2016. “A High Rated Solar Water Distillation Unit for Solar Homes.” Journal of Engineering 2016: 1–8.
  • Saxena, A., and B. Norton. 2021. “Adoption Potential, Thermal Engineering and Economic Viability of Solar Water Heating Systems.” In Solar Water Heating – Fundamentals and Applications, 21–58. New York: Nova Science.
  • Saxena, A., and G. Srivastava. 2012. “Potential and Economics of Solar Water Heating.” MIT International Journal of Mechanical Engineering 2 (2): 97–104.
  • Saxena, A., and G. Srivastava. 2013. “Performance Studies of a Multipurpose Solar Energy System for Remote Areas.” MIT International Journal of Mechanical Engineering 3: 21–33.
  • Saxena, A., Varun, and A. A. El-Sebaii. 2015. “A Thermodynamic Review of Solar Air Heaters.” Renewable and Sustainable Energy Reviews 43: 863–890.
  • Saxena, A., Varun, S. P. Pandey, and G. Srivastava. 2011. “A Thermodynamic Review on Solar Box Type Cookers.” Renewable and Sustainable Energy Reviews 15: 3301–3318.
  • Schiro, F., A. Benato, A. Stoppato, and N. Destro. 2017. “Improving Photovoltaics Efficiency by Water Cooling: Modeling and Experimental Approach.” Energy 137: 798–810.
  • Siahkamari, L., M. Rahimi, N. Azimi, and M. Banibayat. 2019. “Experimental Investigation on Using a Novel Phase Change Material (PCM) in Micro Structure Photovoltaic Cooling System.” International Communications in Heat and Mass Transfer 100: 60–66.
  • Silakhori, M., M. S. Naghavi, H. S. C. Metselaar, T. M. I. Mahlia, H. Fauzi, and M. Mehrali. 2013. “Accelerated Thermal Cycling Test of Microencapsulated Paraffin Wax/Polyaniline Made by Simple Preparation Method for Solar Thermal Energy Storage.” Materials 6: 1608–1620.
  • Siyabi, I. A., K. Shanksa, T. Mallick, and S. Sundaram. 2020. “Indoor and Outdoor Characterization of Concentrating Photovoltaic Attached to Multi-Layered Micro Channel Heat Sink.” Solar Energy 202: 55–72.
  • Smith, M. K., H. Selbak, C. C. Wamser, N. U. Day, M. Krieske, D. J. Sailor, and T. N. Rosenstiel. 2014. “Water Cooling Method to Improve the Performance of Field-Mounted, Insulated, and Concentrating Photovoltaic Modules.” ASME Journal of Journal of Solar Energy Engineering 136: 1–4, 034503.
  • Soliman, A. M. A., H. Hassan, and S. Ookawara. 2019. “An Experimental Study of the Performance of the Solar Cell with Heat Sink Cooling System.” Energy Procedia 162: 127–135.
  • Stropnik, R., and U. Stritih. 2016. “Increasing the Efficiency of PV Panel with the use of PCM.” Renewable Energy 97: 671–679.
  • Teo, H. G., P. S. Lee, and M. N. A. Hawlader. 2012. “An Active Cooling System for Photovoltaic Modules.” Applied Energy 90: 309–315.
  • Tiwari, G. N., and S. Dubey. 2010. Fundamentals of Photovoltaic Modules and Their Applications. Royal Society of Chemistry, U.K.
  • Waqasa, A., and J. Ji. 2017. “Thermal Management of Conventional PV Panel Using PCM with Movable Shutters – A Numerical Study.” Solar Energy 158: 797–807.
  • Wu, S., C. Chen, and L. Xiao. 2018. “Heat Transfer Characteristics and Performance Evaluation of Water-Cooled PV/T System with Cooling Channel Above PV Panel.” Renewable Energy 125: 936–946.
  • Wu, Shenyi, and Chenguang Xiong. 2014. “Passive Cooling Technology for Photovoltaic Panels for Domestic Houses.” International Journal of Low-Carbon Technologies 9: 118–126.
  • Zhao, J., T. Ma, Z. Li, and A. Song. 2019. “Year-Round Performance Analysis of a Photovoltaic Panel Coupled with Phase Change Material.” Applied Energy 245: 51–64.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.