Prediction of the near wall flow behaviours of separation and transition for NREL phase VI wind turbine blade

References

• Dai, J., Y. Hu, D. Liu, and X. Long. 2011. “Aerodynamic Loads Calculation and Analysis for Large Scale Wind Turbine Based on Combining BEM Modified Theory with Dynamic Stall Model.” Renewable Energy 36: 1095–1104.
   Web of Science ®Google Scholar
• Duque, E.P.N., M.D. Burklund, and W. Johnson. 2003. “Navier-Stokes and Comprehensive Analysis Performance Predictions of The NREL Phase VI Experiment.” Journal of Solar Energy Engineering 125: 457–467. doi:10.1115/1.1624088.
   Web of Science ®Google Scholar
• Hand, M., D. Simms, L.J. Fingersh, D. Jager, S. Schreck, and S.M. Larwood. 2001. “Unsteady Aerodynamics Experiment Phase VI: Wind Tunnel Test Configurations and Available Data Campaigns.” National Renewable Energy Laboratory (NREL) Technical Report NREL/TP-500-23955.
   Google Scholar
• Langtry, R.B., and F.R. Menter. 2005. “Transition Modeling for General CFD Applications in Aeronautics.” American Institute of Aeronautics and Astronautics (AIAA) 2005-522.
   Google Scholar
• Lanzafame, R., S. Mauro, and M. Messina. 2013. “Wind Turbine CFD Modeling Using a Correlation-Based Transitional Model.” Renewable Energy 52: 31–39. doi:10.1016/j.renene.2012.10.007.
   Web of Science ®Google Scholar
• Lanzafame, R., and M. Messina. 2012. “BEM Theory: How to Take Into Account the Radial Flow Inside of a 1-D Numerical Code.” Renewable Energy 39: 440–446. doi:10.1016/j.renene.2011.08.008.
   Web of Science ®Google Scholar
• Lee, K., Z. Huque, R. Kommalapati, and H.S. Eul. 2016a. “Evaluation of Equivalent Structural Properties of NREL Phase VI Wind Turbine Blade.” Renewable Energy 86: 796–818. doi:10.1016/j.renene.2015.07.096.
   Web of Science ®Google Scholar
• Lee, K., Z. Huque, R. Kommalapati, S. Roy, C. Sui, and N. Munir. 2016b. “Aerodynamic Noise Characteristics of Horizontal Axis Wind Turbine Blade Using CAA.” Journal of Clean Energy Technologies 4 (5): 346–352. doi:10.18178/JOCET.2016.4.5.310.
   Google Scholar
• Lee, S.G., S.J. Park, K.S. Lee, and C. Chung. 2012. “Performance Prediction of NREL (National Renewable Energy Laboratory) Phase VI Blade Adopting Blunt Trailing Edge Airfoil.” Energy 47: 47–61. doi:10.1016/j.energy.2012.08.007.
   Web of Science ®Google Scholar
• Lee, K., S. Roy, Z. Huque, R. Kommalapati, and S.E. Han. 2017. “Effect on Torque and Thrust of the Pointed Tip Shape of a Wind Turbine Blade.” Energies 10: 79. doi:10.3390/en10010079.
   Web of Science ®Google Scholar
• Li, Y.W., K.-J. Paik, T. Xing, and P.M. Carrica. 2012. “Dynamic Overset CFD Simulations of Wind Turbine Aerodynamics.” Renewable Energy 37: 285–298. doi:10.1016/j.renene.2011.06.029.
   Web of Science ®Google Scholar
• Menter, F.R. 1994. “Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications.” AIAA Journal 32(8): 1598–1605.
   Web of Science ®Google Scholar
• Menter, F.R. 2009. “Review of the Shear-Stress Transport Turbulence Model Experience from an Industrial Perspective.” International Journal of Computational Fluid Dynamics 23: 305–316. doi:10.1080/10618560902773387.
   Web of Science ®Google Scholar
• Menter, F., J.C. Ferreira, T. Esch, and B. Konno. 2003. “The SST Turbulence Model with Improved Wall Treatment for Heat Transfer Predictions in Gas Turbines.” The International Gas Turbine Congress, Tokyo.
   Google Scholar
• Menter, F.R., R.B. Langtry, S.R. Likki, Y.B. Suzen, P.G. Huang, and S. Völker. 2006b. “A Correlation-Based Transition Model Using Local Variables Part I: Model Formulation.” Journal of Turbomachinery 128: 413–422. doi:10.1115/1.2184352.
   Web of Science ®Google Scholar
• Menter, F.R., R. Langtry, and S. Völker. 2006a. “Transition Modeling for General Purpose Codes.” Journal Flow Turbulence and Combustion 77: 277–303. doi:10.1007/s10494-006-9047-1.
   Web of Science ®Google Scholar
• Mo, J., A. Choudhry, M. Arjomandi, R. Kelso, and Y.H. Lee. 2013. “Effects of Wind Speed Changes on Wake Instability of a Wind Turbine in a Virtual Wind Tunnel Using Large Eddy Simulation.” Journal of Wind Engineering and Industrial Aerodynamics 117: 38–56. doi:10.1016/j.jweia.2013.03.007.
   Web of Science ®Google Scholar
• Mo, J.O., and Y.H. Lee. 2012. “CFD Investigation on the Aerodynamic Characteristics of a Small-Sized Wind Turbine of NREL PHASE VI Operating with a Stall-Regulated Method.” Journal of Mechanical Science and Technology 26: 81–92. doi:10.1007/s12206-011-1014-7.
   Web of Science ®Google Scholar
• Moshfeghi, M., Y.J. Song, and Y.H. Xie. 2012. “Effects of Near-Wall Grid Spacing on SST-K-ω Model Using NREL Phase VI Horizontal Axis Wind Turbine.” Journal of Wind Engineering and Industrial Aerodynamics 107-108: 94–105. doi:10.1016/j.jweia.2012.03.032.
   Web of Science ®Google Scholar
• Potsdam, M.A., and D.J. Mavriplis. 2009. “Unstructured Mesh CFD Aerodynamic Analysis of the NREL Phase VI Rotor.” In 47th AIAA Aerospace Sciences Meeting, Orlando, FL, USA.
   Google Scholar
• Ramsay, R.R., M.J. Hoffmann, and G.M. Gregorek. 1995. “Effects of Grit Roughness and Pitch Oscillations on the S809 Airfoil.” In Airfoil Performance Report NREL/TP-442-7817.
   Google Scholar
• Roy, S., Z. Huque, K. Lee, and R. Kommalapati. 2017. “Turbulence Model Prediction Capability in 2D Airfoil of NREL Wind Turbine Blade at Stall and Post Stall Regions.” Journal of Clean Energy Technologies 6 (6): 496–500. doi:10.18178/JOCET.2017.5.6.423.
   Google Scholar
• Schreck, S., M. Hand, and L.J. Fingersh. 2001. “NREL Unsteady Aerodynamics Experiment in the NASA-Ames Wind Tunnel: A Comparison of Predictions to Measurements.” National Renewable Energy Laboratory (NREL) Technical Report NREL/TP-500-29494.
   Google Scholar
• Sezer-Uzol, N., and L.N. Long. 2016. “3-D Time-Accurate CFD Simulations of Wind Turbine Rotor Flow Fields.” In 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada.
   Google Scholar
• Sharifi, A., and M.R.H. Nobari. 2013. “Prediction of Optimum Section Pitch Angle Distribution Along Wind Turbine Blades.” Energy Conversion and Management 67: 342–350. doi:10.1016/j.enconman.2012.12.010
   Web of Science ®Google Scholar
• Tangler, J.L., and J.D. Kocurek. 2005. “Wind Turbine Post-stall Airfoil Performance Characteristics Guidelines for Blade-Element Momentum Methods.” In 43rd AIAA Aerospace Sciences Meeting and Exhibit. Reno, Nevada: NREL/CP-500-36900.
   Google Scholar
• Yelmule, M.M., and E.A. Vsj. 2013. “CFD Predictions of NREL Phase VI Rotor Experiments in NASA/AMES Wind Tunnel.” International Journal of Renewable Energy Research 3(2): 261–269.
   Google Scholar