References
- Al-Amoudi OSB, Asi IM, Wahhab HIA-A, Khan ZA. 2002. Clegg Hammer–California-Bearing Ratio correlations. J Mater Civ Eng. 14:512–523.
- [AASHTO] American Association of State Highway and Transportation Officials. 1993. Guide for design of pavement structures. Washington (DC): American Association of State Highway and Transportation Officials.
- Archer S 2008 Oct. Subgrade improvement for paved and unpaved surfaces using geogrids. CE News. Professional Development Hours. CONTECH Construction Products Inc. and Tensar International; 12 pp. [cited 27 December 2016]. Available from: http://www.conteches.com/knowledge-center/pdh-article-series/subgrade-improvement-using-geogrids
- ASTM D2487-11. Standard practice for classification of soils for engineering purposes (Unified Soil Classification System). [ cited 28 December 2016]. Available from: http://www.astm.org/cgi-bin/resolver.cgi?D2487
- Austroads. 1992. Pavement design: a guide to the structural design of road pavements. Sydney (NSW): AUSTROADS.
- [APRG] Austroads Pavement Research Group. 1997. A guide to the design of new pavements for light traffic. APRG Report No. 21. ARRB Transport Research.
- Boston K, Pyles M, Bord A. 2008. Compaction of forest roads in northwestern Oregon – Room for improvement. Int J For Eng. 19:24–28.
- Burnham KP, Anderson DR. 1998. Model selection and multimodel inference: a practical information-theoretic approach. 2nd ed. New York (NY): Springer.
- Clegg B 1986. Correlation with California Bearing Ratio. Dr Baden Clegg Pty. Ltd. Newsletter 2; [ cited 10 February 2017]. Available from: http://www.clegg.com.au/information_list12.asp
- Fairbrother S, Visser R, McGregor R. 2009. Forest road pavement design in New Zealand. In: Hartsough B. and Stokes B., editors. 32nd Annual Meeting of the Council on Forest Engineering (COFE 2009); 2009 Jun 15–18; Kings Beach (CA). 8 pp.
- Fairbrother S. 2011a. Estimating forest road aggregate strength by measuring fundamental aggregate properties. In: Lebel L., Benjamin J., Beaudoin D., Gingras J-F, D’Amours S., Dubeau D., Tremblay P-S, editors. 34th Annual Meeting of the Council on Forest Engineering (COFE 2011); 2011 Jun 12–15; Quebec City: Bruce Hartsough and Bryce Stokes. 9 pp.
- Fairbrother S. 2011b. Aggregate gradation – Getting the road surface right. New Zealand J For. 55:11–12.
- GeoCHEM, Inc. 2015. Products. [ cited 28 December 2016]. Available from: www.geocheminc.com/geogrids.htm
- Giroud JP, Ah-Line C, Bonaparte R. 1985. Design of unpaved roads and trafficked areas with geogrids. In: Polymer grid reinforcement. 1984 Mar 23–24. London: Thomas Telford Limited p. 116–127.
- Giroud JP, Han J. 2004. Design method for geogrid-reinforced unpaved roads. II. Calibration and applications. J Geotech Geoenviron Eng. 130:787–797.
- Giroud JP, Noiray L. 1981. Geotextile-reinforced unpaved road design. J Geotech Eng. 107:1233–1254.
- Haas R, Walls J, Carroll RG. 1988. Geogrid reinforcement of granular bases in flexible pavements. Washington (DC): Transportation Research Board.
- Hufenus R, Rueegger R, Banjac R, Mayor P, Springman SM, Bronnimann R. 2006. Full-scale field tests on geosynthetic reinforced unpaved roads on soft subgrade. Geotext Geomembranes. 24:21–37.
- Kestler MA. 2009. Stabilization selection guide for aggregate and native-surfaced low-volume roads. San Dimas (CA): U.S. Department of Agriculture Forest Service National Technology & Development Program.
- Légère G, Blond É. 2002. Applicability of geosynthetics for the reinforcement of forest roads in Muskeg bogs. Advantage. For Eng Res Inst Can (FERIC). 25:1–4.
- Maccaferri. [ cited 2011]. Available from: www.maccaferri.co.nz/wawcs013197/Software.html
- Mathur TS, Coghlans GT. 1987. The use of the Clegg impact tester in managing and designing aggregate-surfaced roads. In: Transportation Research Board, 4th International Conference on Low-Volume Roads, 1. Washington (DC); p. 232–236.
- Palmeira EM, Antunes LGS. 2010. Large scale tests on geosynthetic reinforced unpaved roads subjected to surface maintenance. Geotext Geomembranes. 28:547–558.
- Pattison J, Boston K, Pyles M. 2010. Development of a correlation model between a 20-kg Clegg Hammer and field CBR for measuring subgrade strength in forest roads in western Oregon. Int J For Eng. 21:12–19.
- Sessions, J., editor. 2007. Forest road operations in the tropics. In: Tropical Forestry. New York (NY): Springer. 176 pp. ISBN: 3-540-46392-5.
- Sigurdsson O. 1991. Geosynthetic stabilization of unpaved roads on soft ground: a field evaluation [MS thesis]. Vancouver: University of British Columbia. 149 pp.
- Vischer W. 2003. Low-volume road flexible pavement design with geogrid-reinforced base. Transportation Research Record. J Transport Res Board. 1819:247–254.