219
Views
0
CrossRef citations to date
0
Altmetric
Original Articles

Model and Performance of Current Sensor Observers for a Doubly Fed Induction Generator

, , , , , , & show all
Pages 1048-1058 | Received 17 May 2013, Accepted 30 Mar 2014, Published online: 24 Jun 2014

Reference

  • Khayyatzadeh, M., and Tousi, B., “Damping of power system oscillations via quantum particle swarm optimization based distributed static series compensator,” Elect. Power Compon. Syst., Vol. 41, No. 7, pp. 729–746, 2013.
  • Li, H., Yang, C., Zhao, B., Wang, H.S., and Chen, Z., “Aggregated models and transient performances of a mixed wind farm with different wind turbine generator systems,” Elect. Power Syst. Res., Vol. 92, pp. 1–10, November 2012.
  • Hansen, A.D., Michalke, G., Sørensen, P., Lund, T., and Iov, F., ”Co-ordinated voltage control of DFIG wind turbines in uninterrupted operation during grid faults,” Wind Energy, Vol. 6, pp. 22–26, August 2006.
  • Xu, L., and Cartwright, P., “Direct active and reactive power control of DFIG for wind energy generation,” IEEE Trans. Energy Convers., Vol. 21, No. 3, pp. 750–758, September 2006.
  • Nait-kaci, B., and Doumbia, M.L., “Active and reactive power control of a doubly fed induction generator for wind applications,” Proc. IEEE European Conference on Electronics, EUROCON, pp. 2034–2039, St.-Petersburg, 18–23 May 2009.
  • Lie X.U., “Coordinated control of DFIG's rotor and grid side converters during network unbalance,” IEEE Trans. Power Electron., Vol. 23, No. 3, pp. 1041–1049, May 2008.
  • Aghatehrani, R., Fan, L., and Kavasseri, R., “Coordinated reactive power control of DFIG rotor and grid sides converters,” Proc. IEEE PES 2009 General Meeting, . Calgary, AB, 26–30 July 2009.
  • Vinothkumar, K., and Selvan, M.P., “Novel coordinated converter control (3C) strategy for enhancement of fault ride-through capability of doubly fed induction generator wind farms,” Elect. Power Compon. Syst., Vol. 39, No. 14, pp. 1493–1506, 2011.
  • Shehata, E.G., “Active and reactive power control of doubly fed induction generators for wind energy generation under unbalanced grid voltage conditions,” Elect. Power Compon. Syst., Vol. 41, No. 6, pp. 619–640, 2013.
  • Rothenhagen, K., and Fuchs, F.W., “Doubly fed induction generator model-based sensor fault detection and control loop reconfiguration,” IEEE Trans. Ind. Electron., Vol. 56, No. 10, pp. 4229–4238, October 2009.
  • Rothenhagen, K., and Fuchs, F.W., “Current sensor fault detection by bilinear observer for a doubly fed induction generator,” Proc. IEEE International Conference on Industrial Electronics, Control, and Instrumentation, IECON, . pp. 1369–1374, Paris, France, 6–10 November 2006.
  • Trudnowski, D.J., Gentile, A., Khan, J.M., and Petritz, E.M., “Fixed- speed wind-generator and wind-park modeling for transient stability studies,” IEEE Trans. Power Syst., Vol. 19, No. 4, pp. 1911–1917, November 2004.
  • Li, H., Zhao, B., Yang, C., Chen, H.W., and Chen, Z., “Analysis and estimation of transient stability for a grid-connected wind turbine with induction generator,” Renew. Energy, Vol. 36, No. 5, pp. 1469–1476, May 2011.
  • Petersson, A., Harnefors, L., and Thiringer, T., “Evaluation of current control methods for wind turbines using doubly-fed induction machines,” IEEE Trans. Power Electron., Vol. 20, pp. 2270–3235, January 2005.
  • Sun, T., Chen, Z., and Blaabjerg, F., “Transient stability of DFIG wind turbines at an external short-circuit fault,” Wind Energy, Vol. 8, pp. 345–360, July/September 2005.
  • Kubota, H., and Matsuse, K., “The improvement of performance at low speed by offset compensation of stator voltage sensorless vector controlled induction machines,” Proc. IEEE IAS Ann. Mtg., . Vol. 1, pp. 257–261, San Diego, CA, 6–10 October 1996.
  • Kubota, H., and Matsuse, K., “Speed sensorless field oriented control of induction machines using flux observer,” Proc.IEEE IECON, . Vol. 3, pp. 1611–1615, Bologna, 5–9 September 1994.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.