Fault Diagnosis of an Induction Generator in a Wind Energy Conversion System Using Signal Processing Techniques

References

• Valéria, C.M. N. L., Borges da Silva, J.G., Cintra Veloso, G.F., Borges da Silva, L.E., Lambert-Torres, G., Bonaldi, E.L., and de Lacerda de Oliveira, L.E., “Detection of localized bearing faults in induction machines by spectral kurtosis and envelope analysis of stator current,” IEEE Trans. Ind. Electron., Vol. 62, No. 3, pp. 1855–1865, 2015.
   Web of Science ®Google Scholar
• Choi, S., Akin, B., Rahimian, M.M., and Toliyat, H.A., “Implementation of a fault-diagnosis algorithm for induction machines based on advanced digital-signal-processing techniques,” IEEE Trans. Ind. Electron., Vol. 58, No. 3, pp. 937–948, 2011.
   Web of Science ®Google Scholar
• Pezzani, C.M., Bossio, J.M., Castellino, A.M., Bossio, G.R., and De Angelo, C.H., “Bearing fault detection in wind turbines with permanent magnet synchronous machines,” IEEE Latin Amer. Trans., Vol. 12, No. 7, pp. 1199–1205, 2014.
   Web of Science ®Google Scholar
• Ebrahimi, B.M., Roshtkhari, M.J., Faiz, J., and Khatami, S.V., “Advanced eccentricity fault recognition in permanent magnet synchronous motors using stator current signature analysis,” IEEE Trans. Ind. Electron., Vol. 61, No. 4, pp. 2041–2052, 2014.
   Web of Science ®Google Scholar
• Hau, E., and Renouard, H.V., “Electrical system,” in Wind Turbines Fundamentals, Technologies, Application, Economics, 2nd ed., . Berlin, Heidelberg: Springer-Verlag, pp. 319–356, 2006.
   Google Scholar
• Bansal, R.C., Bhatti, T.S., and Kothari, D.P., “A bibliographical survey on induction generators for application of nonconventional energy systems,” IEEE Trans. Energy Convers., Vol. 18, No. 3, pp. 433–439, 2003.
   Web of Science ®Google Scholar
• Khan, P.K. S., and Chatterjee, J.K., “Three-phase induction generators: A discussion on performance,” Electr. Mach. Power Syst., Vol. 27, No. 8, pp. 813–832, 1998.
   Google Scholar
• Yang, W., Tavner, P.J., and Wilkinson, M.R., “Condition monitoring and fault diagnosis of a wind turbine synchronous generator drive train,” IET Renew. Power Generat., Vol. 3, No. 1, pp. 1–11, 2009.
   Web of Science ®Google Scholar
• Bonnet, A.H., “Cause and analysis of stator and rotor failures in three phase squirrel-cage induction motors,” IEEE Trans. Ind. Appl., Vol. 28, No. 4, pp. 921–437, July/August 1992.
   Web of Science ®Google Scholar
• Kumaresan, N., Selvan, M.P., and Subbiah, M., “Design optimisation and speed extension of wind-driven self-excited induction generators—a new approach,” Electr. Power Compon. Syst., Vol. 32, pp. 215–228, 2004.
   Web of Science ®Google Scholar
• Kuo, S.C., “Analysis of parallel-operated self-excited induction generators feeding an induction motor load with a long-shunt connection,” Electr. Power Compon. Syst., Vol. 32, pp. 1043–1060, 2004.
   Web of Science ®Google Scholar
• Rajagopal, V., Singh, B., and Kasal, G.K., “Electronic load controller with power quality improvement of isolated induction generator for small hydro power generation,” IET Renew. Power Generat., Vol. 5, No. 2, pp. 202–213, 2011.
   Web of Science ®Google Scholar
• Singh, B., Murthy, S.S., and Gupta, S., “Transient analysis of self-excited induction generator with electronic load controller (ELC) supplying static and dynamic loads,” IEEE Trans. Ind. Appl., Vol. 41, No. 5, pp. 1194–1204, 2005.
   Web of Science ®Google Scholar
• Benbouzid, M.E., “A review of induction motors signature analysis as a medium for faults detection,” IEEE Trans. Ind. Electron., Vol. 47, No. 5, pp. 984–993, 2000.
   Web of Science ®Google Scholar
• Blödt, M., Bonacci, D., Regnier, J., Chabert, M., and Faucher, J., “On-line monitoring of mechanical faults in variable-speed induction motor drives using the Wigner distribution,” IEEE Trans. Ind. Electron., Vol. 55, No. 2, pp. 522–533, 2008.
   Web of Science ®Google Scholar
• Bendjama, H., Bouhouche, S., and Boucherit, M.S., “Application of wavelet transform for fault diagnosis in rotating machinery,” Int. J. Machine Learn. Comput., Vol. 2, No. 1, pp. 82–87, 2012.
   Google Scholar
• Al-Badour, F., Sunar, M., and Cheded, L., “Vibration analysis of rotating machinery using time-frequency analysis and wavelet techniques,” Mechan. Syst. Signal Process., Vol. 25, No. 6, pp. 2083–2101, August 2011.
   Web of Science ®Google Scholar
• Ping, Z.Y., Hong, H.S., Hong, H.J., Tao, S., and Wei, L., “Continuous wavelet grey moment approach for vibration analysis of rotating machinery,” Mechan. Syst. Signal Process., Vol. 20, pp. 1202–1220, 2006.
   Web of Science ®Google Scholar
• Singh, G.K., “Modeling and experimental analysis of a self excited six-phase induction generator for stand-alone renewable energy generation,” Renew. Energy, Vol. 33, pp. 1605–1621, 2008.
   Web of Science ®Google Scholar
• Bašic, M., Vukadinovic, D., and Petrovic, G., “Dynamic and pole-zero analysis of self-excited induction generator using a novel model with iron losses,” Electr. Power Energy Syst., Vol. 42, pp. 105–118, 2012.
   Web of Science ®Google Scholar
• Bodson, M., and Kiselychnyk, O., “Analysis of triggered self-excitation in induction generators and experimental validation,” IEEE Trans. Energy Convers., Vol. 27, No. 2, pp. 238–249, 2012.
   Web of Science ®Google Scholar
• Mahato, S.N., Singh, S.P., and Sharma, M.P., “Dynamic behavior of a single-phase self-excited induction generator using a three-phase machine feeding single-phase dynamic load,” Electr. Power Energy Syst., Vol. 47, pp. 1–12, 2013.
   Web of Science ®Google Scholar
• Bodson, M., and Kiselychnyk, O., “Analysis of triggered self-excitation in induction generators and experimental validation,” IEEE Trans. Energy Convers., Vol. 27, No. 2, pp. 238–249, June 2012.
   Web of Science ®Google Scholar
• Idjdarene, K., Rekioua, D., Rekioua, T., and Tounzi, A., “Performance of an isolated induction generator under unbalanced loads,” IEEE Trans. Energy Convers., Vol. 25, No. 2, pp. 303–311, 2010.
   Web of Science ®Google Scholar
• Mohammed, O.A., Abed, N.Y., and Garni, S., “Modeling and characterization of induction motor internal faults using finite element and discrete wavelet transforms,” Electric Ship Technologies Symposium (ESTS ‘07), pp. 250–253, Arlington, VA, 21–23 May 2007.
   Google Scholar
• Jung, J.H., Lee, J.J., and Kwon, B.H., “Online diagnosis of induction motors using MCSA,” IEEE Trans. Ind. Electron., Vol. 53, No. 6, pp. 1842–1852, 2006.
   Web of Science ®Google Scholar
• Hallenius, K.E., Vas, P., and Brown, J.E., “The analysis of a saturated self-excited asynchronous generator,” IEEE Trans. Energy Convers., Vol. 6, No. 2, pp. 336–345, June 1991.
   Web of Science ®Google Scholar
• Vas, P., Hallenius, K.E., and Brown, J.E., “Cross-saturation in smooth-air-gap electrical machines,” IEEE Trans. Energy Convers., Vols. EC-1, No. 1, pp. 103–112, March 1986.
   Web of Science ®Google Scholar
• Brown, J.E., Kovacs, K.P., and Vas, P., “A method of including the effects of main flux path saturation in the generalised equations of A.C. machines,” IEEE Trans. Power Apparat. Syst., Vols. PAS-102, No. 1, pp. 96–103, January 1983.
   Web of Science ®Google Scholar
• Ma, D., Self-excited Induction Generator—A Study Based on Nonlinear Dynamic Methods, Doctor of Philosophy Thesis, Newcastle University, Newcastle Upon Tyne, UK, May, 2012.
   Google Scholar
• Attoui, I., and Omeiri, A., “Modeling, control and fault diagnosis of an isolated wind energy conversion system with a self-excited induction generator subject to electrical faults,” Energy Convers. Manag., Vol. 82, pp. 11–26, 2014.
   Web of Science ®Google Scholar
• Ben Sasi, A.Y., Gu, F., Li, Y., and Ball, A. D., “A validated model for the prediction of rotor bar failure in squirrel-cage motors using instantaneous angular speed,” Mechan. Syst. Signal Process., Vol. 20, pp. 1572–1589, 2006.
   Web of Science ®Google Scholar
• Ahmed, T., Nishida, K., and Nakaoka, M., “Advanced control of PWM converter with variable-speed induction generator,” IEEE Trans. Ind. Appl., Vol. 42, No. 4, pp. 934–945, 2006.
   Web of Science ®Google Scholar
• Mohan, N., Undeland, T.M., and Robbins, W.P., “Power electronic circuits and controls,” in Power Electronics: Converters, Applications, and Design, 2nd ed., New York: Wiley, Chap. 2, 1995.
   Google Scholar
• Singh, B., Murthy, S.S., and Gupta, S., “Analysis and design of electronic load controller for self-excited induction generators,” IEEE Trans. Energy Convers., Vol. 21, No. 1, pp. 285–293, 2006.
   Web of Science ®Google Scholar
• Klimanet, G.B., and Stein, B. J., “Methods of motor current signature analysis,” Electr. Machines Power Syst., Vol. 20, No. 5, pp. 463–474, 1992.
   Web of Science ®Google Scholar
• Gritli, Y., Stefani, A., Rossi, C., Filippetti, F., and Chatti, A., “Experimental validation of doubly fed induction machine electrical faults diagnosis under time-varying conditions,” Electr. Power Syst. Res., Vol. 81, pp. 751–766, 2011.
   Web of Science ®Google Scholar
• Xie, H., Lin, J., Lei, Y., and Liao, Y., “Fast-varying AM–FM components extraction based on an adaptive STFT,” Digital Signal Process., Vol. 22, pp. 664–670, 2012.
   Web of Science ®Google Scholar
• Owsley, L. M. D., Atlas, L. E., and Bernard, G. D., “Self-organizing feature maps and hidden Markov models for machine-tool monitoring,” IEEE Trans. Signal Process., Vol. 45, No. 11, pp. 2787–2796, 1997.
   Web of Science ®Google Scholar
• Walker, J.S., A Primer on Wavelets and Their Scientific Applications, London: Chapman and Hall/CRC, 1999.
   Google Scholar
• Mallat, S.G., “A theory for multiresolution signal decomposition: The wavelet representation,” IEEE Trans. Pattern Anal. Machine Intell., Vol. 11, No. 7, pp. 674–693, 1989.
   Web of Science ®Google Scholar
• Addison, P.S., Watson, J.N., and Feng, T., “Low-oscillation complex wavelets,” J. Sound Vibrat., Vol. 254, No. 4, pp. 733–762, 2002.
   Web of Science ®Google Scholar
• Polikar, R., Udpa, L., Udpa, S. S., and Taylor, T., “Frequency invariant classification of ultrasonic weld inspection signals,” IEEE Trans. Ultrasonics, Ferroelectrics, and Frequency Control, Vol. 45, No. 3, pp. 614–625, 1998.
   PubMed Web of Science ®Google Scholar
• Kia, S.H., Henao, H., and Capolino, G.A., “Diagnosis of broken-bar fault in induction machines using discrete wavelet transform without slip estimation,” IEEE Trans. Ind. Appl., Vol. 45, No. 4, pp. 107–121, 2009.
   Google Scholar
• Antonino-Daviu, J., Riera-Guasp, M., Roger-Folch, J., and Molina, M.P., “Validation of a new method for the diagnosis of rotor bar failures via wavelet transformation in industrial induction machines,” IEEE Trans. Ind. Appl., Vol. 42, No. 4, pp. 990–996, 2006.
   Web of Science ®Google Scholar
• Antonino-Daviu, J., Jover, P., Riera-Guasp, M., Roger-Folch, J., and Arkkio, A., “DWT analysis of numerical and experimental data for the diagnosis of dynamic eccentricities in induction motors,” Mechan. Syst. Signal Process., Vol. 21, No. 6, pp. 2575–2589, 2007.
   Web of Science ®Google Scholar