193
Views
1
CrossRef citations to date
0
Altmetric
Original Articles

Evaluation of the Interface Accuracy for Power Hardware-in-the-Loop Experiments

, , &
Pages 763-773 | Received 08 Jun 2016, Accepted 22 Jan 2017, Published online: 12 Apr 2017

References

  • Dai, H., Zhang, X., Wei, X., Sun, Z., Wang, J., and Hu, F., “Cell-BMS validation with a hardware-in-the-loop simulation of lithium-ion battery cells for electric vehicles,” Int. J. Electr. Power Energy Syst., Vol. 52, No. 11, pp. 174–184, 2013.
  • Lemeš, Z., Vath, A., Hartkopf, T., and Mäncher, H., “Dynamic fuel cell models and their application in hardware in the loop simulation,” J. Power Sour., Vol. 154, No. 3/21, pp. 386–393, 2006.
  • Pugi, L., Galardi, E., Carcasci, C., Rindi, A., and Lucchesi, N., “Preliminary design and validation of a Real Time model for hardware in the loop testing of bypass valve actuation system,” Energy Convers. Manage., Vol. 92, No. 3/1, pp. 366–384, 2015.
  • Vath, A., Lemčs, Z., Mäncher, H., Söhn, M., Nicoloso, N., and Hartkopf, T., “Dynamic modelling and hardware-in-the-loop testing of PEMFC,” J. Power Sour., Vol. 157, No. 7/3, pp. 816–827, 2006.
  • Crăciun, O., Florescu, A., Munteanu, I., Bratcu, A. I., Bacha, S., and Radu, D., “Hardware-in-the-loop simulation applied to protection devices testing,” Int. J. Electr. Power Energy Syst., Vol. 54, No. 1, pp. 55–64, 2014.
  • Jung, J., “Power hardware-in-the-loop simulation (PHILS) of photovoltaic power generation using real-time simulation techniques and power interfaces,” J. Power Sour., Vol. 285, No. 7/1, pp. 137–145, 2015.
  • Zhou, Y., Lin, J., Song, Y., Cai, Y., and Liu, H., “A power hardware-in-loop based testing bed for auxiliary active power control of wind power plants,” Electr. Power Syst. Res., Vol. 124, No. 7, pp. 10–17, 2015.
  • “IEEE recommended practice for 1 kV to 35 kV medium-voltage DC power systems on ships,” IEEE Std., Vol. 1709–2010, No. 2, pp. 1–54, November 2010.
  • Milosevic, M., Prempraneerach, P., Kirtley, J.L., Karniadakis, G., Chryssostomidis, C.. “An end-to-end simulator for the all-electric ship MVDC integrated power system,” in Proceedings of the Grand Challenges in Modeling and Simulation (GCMS10), Ottawa, Canada, 2010.
  • Steurer, M., Edrington, C.S., Sloderbeck, M., Ren, W., Langston, J., A Megawatt-scale power hardware-in-the-loop simulation setup for motor drives, IEEE Trans. Industr. Electron., Vol. 57, No. 4, pp. 1254–1260, 2010.
  • Naeckel, O., Langston, J., Steurer, M., Fleming, F., Paran, S., Edrington, C., Noe, M., Power hardware-in-the-loop testing of an air coil superconducting fault current limitter demnstrator' Applied Superconductivity Conference, North Carolina, Charlotte, August 2014.
  • Choi, C., Lee, W., “Analysis and compensation of time delay effects in hardware-in-the-loop simulation for automotive PMSM drive system,” Industr. Electron. IEEE Trans., Vol. 59, No. 9, pp. 3403, 3410, September 2012.
  • Grubic, S., Amlang, B., Schumacher, W., Wenzel, A., “A high-performance electronic hardware-in-the-loop drive–load simulation using a linear inverter (LinVerter),” Industr. Electron. IEEE Trans., Vol. 57, No. 4, pp. 1208–1216, April 2010.
  • Facchinetti, A., Mauri, M., “Hardware-in-the-loop overhead line emulator for active pantograph testing,” Industr. Electron. IEEE Trans., Vol. 56, No. 10, pp. 4071–4078, October 2009.
  • Faruque, M.O.O., Dinavahi, V., “Hardware-in-the-loop simulation of power electronic systems using adaptive discretization,” Industr. Electron. IEEE Trans., Vol. 57, No. 4, pp. 1146–1158, April 2010.
  • Bin, L., Xin, W., Figueroa, H., Monti, A., “A low-cost real-time hardware-in-the-loop testing approach of power electronics controls,” Industr. Electron. IEEE Trans., Vol. 54, No. 2, pp. 919–931, April 2007.
  • Roshandel Tavana, N., Dinavahi, V., “A general framework for FPGA-based real-time emulation of electrical machines for HIL applications,” Industr. Electron. IEEE Trans., Vol. 62, No. 4, pp. 2041–2053, April 2015.
  • Bacic, M., “On hardware-in-the-loop simulation,” in Proc. 44th IEEE Conf. Decision Control/Eur. Control Conf., Seville, Spain, December 12–15, 2005, pp. 3194–3198.
  • Ayasun, S., Vallieu, S., Fishl, R., and Chmielewski, T., “Electric machinery diagnostic/testing system and power hardware-in-the-loop studies,” in Proc. 4th IEEE Int. Symp. Diagnostics Elect. Mach., Power Electron. Drives, Atlanta, GA, August 24–26, 2003, pp. 361–366.
  • Paran, S., “Utilization of impedance matching to improve damping impedance method-based PHIL interface,” M.S. thesis, Dept. Electron. Eng., Florida State Univ., Florida, USA, 2013
  • Paran, S., Edrington, C.S., “Improved power hardware in the loop interface methods via impedance matching,” Electric Ship Technologies Symposium (ESTS), 2013 IEEE, pp. 342,346, 22–24 April 2013.
  • Paran, S., Edrington, C.S., Vural, B., “Investigation of HIL interfaces in nonlinear load studies,” North American Power Symposium (NAPS), 2012, pp. 1, 6, 9–11 September 2012.
  • Ren, W., Steurer, M., Baldwin, T.L., “Improve the stability and the accuracy of power hardware-in-the-loop simulation by selecting appropriate interface algorithms,” Industr. Electron. IEEE Trans., Vol. 44, No. 4, pp. 1286–1294, July–August 2008.
  • Ren, W., Sloderbeck, M., Steurer, M., Dinavahi, V., Noda, T., Filizadeh, S., Chevrefils, A.R., Matar, M., Iravani, R., Dufour, C., Belanger, J., Faruque, M.O., Strunz, K., Martinez, J.A., “Interfacing issues in real-time digital simulators,” Power Deliv IEEE Trans., Vol. 26, No. 2, pp. 1221–1230, April 2011.
  • Ren, W., Steurer, M., Baldwin, T.L., “An effective method for evaluating the accuracy of power hardware-in-the-loop simulations,” Industr. Electron. IEEE Trans., Vol. 45, No. 4, pp. 1484–1490, July–August 2009.
  • Blaabjerg, F., Teodorescu, R., Liserre, M., and Timbus, A., “Overview of control and grid synchronization for distributed power generation systems,” Industr. Electron. IEEE Trans., Vol. 53, pp. 1398–1409, 2006.
  • Fatehnia, M., Paran, S., Kish, S., Tawfiq, K., Automating double ring infiltrometer with an Arduino microcontroller, Geoderma, Vol. 262, pp. 133–139, 15 January 2016.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.