Closed-form Method for Multi-stage Axial Flux Permanent Magnet Machine: Design and Analysis

References

• Madhavan, R., and Fernandes, B. G., “Axial flux segmented SRM with a higher number of rotor segments for electric vehicles,” IEEE Trans. Energy Convers., Vol. 28, No. 1, pp. 203–213, March 2013.
   Web of Science ®Google Scholar
• Nasiri-Gheidari, Z., and Lesani, H., “Optimal design of adjustable air-gap, two-speed, capacitor-run, single-phase axial flux induction motors,” IEEE Trans. Energy Convers., Vol. 28, No. 3, pp. 543–552, September 2013.
   Web of Science ®Google Scholar
• Alberti, L., Fornasiero, E., Bianchi, N., and Bolognani, S., “Rotor losses measurements in an axial flux permanent magnet machine,” IEEE Trans. Energy Convers., Vol. 26, No. 2, pp. 639–645, June 2011.
   Web of Science ®Google Scholar
• Aydin, M., Huang, S., and Lipo, T. A., “Design, analysis, and control of a hybrid field-controlled axial-flux permanent-magnet motor,” IEEE Trans. Ind. Electron., Vol. 57, No. 1, pp. 78–87, January 2010.
   Web of Science ®Google Scholar
• Vansompel, H., Sergeant, P., and Dupre, L., “A multilayer 2-D–2-D coupled model for eddy current calculation in the rotor of an axial-flux PM machine,” IEEE Trans. Energy Convers., Vol. 27, No. 3, pp. 784–791, September 2012.
   Web of Science ®Google Scholar
• Vansompel, H., Sergeant, P., Dupre, L., and Bossche, A., “A combined wye-delta connection to increase the performance of axial-flux PM machines with concentrated windings,” IEEE Trans. Energy Convers., Vol. 27, No. 2, pp. 403–410, June 2012.
   Web of Science ®Google Scholar
• Hekmati, P., and Mirsalim, M., “Design and analysis of a novel axial-flux slotless limited-angle torque motor with trapezoidal cross section for the stator,” IEEE Trans. Energy Convers., Vol. 28, No. 4, pp. 815–822, December 2013.
   Web of Science ®Google Scholar
• Wang, R.-J., and Kamper, M. J., “Calculation of eddy current loss in axial field permanent-magnet machine with coreless stator,” IEEE Trans. Energy Convers., Vol. 19, No. 3, pp. 532–538, September 2004.
   Web of Science ®Google Scholar
• Huang, S., Luo, J., Leonardi, F., and Lipo, T. A., “A comparison of power density for axial flux machines based on general purpose sizing equations,” IEEE Trans. Energy Conv., Vol. 14, No. 2, pp. 185–192, June 1999.
   Web of Science ®Google Scholar
• Sitapati, K., and Krishnan, R., “Performance comparisons of radial and axial field, permanent-magnet, brushless machines,” IEEE Trans. Ind. Appl., Vol. 37, No. 5, pp. 1219–1226, 2001.
   Web of Science ®Google Scholar
• Mahmoudi, A., Kahourzade, S., Rahim, N. A., and Hew, W. P., “Design, analysis, and prototyping of an axial-flux permanent magnet motor based on genetic algorithm and finite-element analysis,” IEEE Trans. Magn., Vol. 49, No. 4, pp. 1479–1492, 2013.
   Web of Science ®Google Scholar
• Zhaoa, S., Lianga, J., and Zhao, Y., “Optimization design and direct torque control of a flux concentrating axial flux permanent magnet motor for direct driving system,” Electr. Mach. Power Syst., Vol. 42, No. 14, pp. 1517–1529, 2014.
   Google Scholar
• Benoudjit, A., Guettafi, A., and Nait SaÏ, N., “Axial flux induction motor for on-wheel drive propulsion system,” Electr. Mach. Power Syst., Vol. 28, No. 12, pp. 1107–1125, November 2010.
   Google Scholar
• Marignetti, F., Vahedi, A., and Mirimani, S. M., “An analytical approach to eccentricity in axial flux permanent magnet synchronous generators for wind turbines,” Electr. Power Comp. Syst., Vol. 43, No. 8–10, pp. 1039–1050, May 2015.
   Web of Science ®Google Scholar
• Kim, J. H., Li, Y., and Sarlioglu, B., “Novel six-slot four-pole axial flux-switching permanent magnet machine for electric vehicle,” IEEE Trans. Transp. Electrif., Vol. 3, No. 1, pp. 108–117, 2017.
   Google Scholar
• Huang, S., Aydin, M., and Lipo, T. A., “TORUS concept machines: pre-prototyping design assessment for two major topologies,” in proc. IEEE IAS Annu. Meeting, 2001, Vol. 3, pp. 1619–1625.
   Google Scholar
• Nguyen, T. D., Tseng, K.-J., and Zhang, S., “A Novel axial flux permanent-magnet machine for flywheel energy storage system: design and analysis,” IEEE Trans. Ind. Electron., Vol. 58, No. 9, pp. 3784–3794, September 2011.
   Web of Science ®Google Scholar
• Kim, J. H., and Sarlioglu, B., “Preliminary design of axial flux permanent magnet machine for marine current turbine,” in proc. IEEE IECON, 2013, pp. 3066–3071.
   Google Scholar
• Di Gerlando, A., Foglia, G., Iacchetti, M. F., and Perini, R., “Axial flux PM machines with concentrated armature windings: design analysis and test validation of wind energy generators,” IEEE Trans. Ind. Electron., Vol. 58, No. 9, pp. 3795–3805, September 2011.
   Web of Science ®Google Scholar
• Azzouzi, J., Barakat, G., and Dakyo, B., “Quasi-3-D analytical modeling of the magnetic field of an axial flux permanent-magnet synchronous machine,” IEEE Trans. Energy Convers., Vol. 20, No. 4, pp. 746–752, December 2005.
   Web of Science ®Google Scholar
• Sung, S.-Y., Jeong, J.-H., Park, Y.-S., Choi, J.-Y., and Jang, S.-M., “Improved analytical modeling of axial flux machine with a double-sided permanent magnet rotor and slotless stator based on an analytical method,” IEEE Trans. Magn., Vol. 48, No. 11, pp. 2945–2948, November2012.
   Web of Science ®Google Scholar
• Parviainen, A., Niemela, M., and Pyrhonen, J., “Modeling of axial flux permanent-magnet machines,” IEEE Trans. Ind. Appl., Vol. 40, No. 5, pp. 1333–1340, September 2004.
   Web of Science ®Google Scholar
• Tiegna, H., Bellara, A., Amara, Y., and Barakat, G., “Analytical modeling of the open-circuit magnetic field in axial flux permanent-magnet machines with semi-closed slots,” IEEE Trans. Magn., Vol. 48, No. 3, pp. 1212–1226, March 2012.
   Web of Science ®Google Scholar
• Lipo, T. A., Introduction to AC Machine Design, 3th ed. Wisconsin Power Electronics Research Center, University of Wisconsin-Madison, 2011.
   Google Scholar
• Huang, S., Luo, J., Leonardi, F., and Lipo, T. A., “A general approach to sizing and power density equations for comparison of electrical machines,” IEEE Trans. Ind. Appl., Vol. 34, No. 1, pp. 92–97, 1998.
   Web of Science ®Google Scholar
• Kim, J. H., Choi, W., and Sarlioglu, B., “Closed-form solution for winding types of axial flux permanent magnet machines,” in IEEE Energy Convers. Congr. Expo., 2014, pp. 5877–5884.
   Google Scholar
• Jensen, C. C., A Novel Axial Field Permanent Magnet Machine Using Amorphous Iron, M.S. thesis, Dept. Elect. Eng., Univ. of Wisconsin-Madison, WI, 1989.
   Google Scholar
• Cassimere, B. N., Sudhoff, S. D., and Sudhoff, D. H., “Analytical design model for surface-mounted permanent-magnet synchronous machines,” IEEE Trans. Energy Convers., Vol. 24, No. 2, pp. 347–357, June 2009.
   Web of Science ®Google Scholar
• Mi, C., Slemon, G. R., and Bonert, R., “Modeling of iron losses of permanent-magnet synchronous motors,” IEEE Trans. Ind. Appl., Vol. 39, No. 3, pp. 734–742, May 2003.
   Web of Science ®Google Scholar
• Zhu, Z. Q., Howe, D., and Chan, C. C., “Improved analytical model for predicting the magnetic field distribution in brushless permanent-magnet machines,” IEEE Trans. Magn., Vol. 38, No. 1, pp. 229–238, 2002.
   Web of Science ®Google Scholar
• Chung, M.-J., and Gweon, D.-G., “Modeling of the armature slotting effect in the magnetic field distribution of a linear permanent magnet motor,” Electr. Eng., Vol. 84, No. 2, pp. 101–108, 2002.
   Web of Science ®Google Scholar
• El-Refaie, A., Jahns, T. M., and Novotny, D. W., “Analysis of surface permanent magnet machines with fractional-slot concentrated windings,” IEEE Trans. Energy Conv., Vol. 21, No. 1, pp. 34–43, 2006.
   Web of Science ®Google Scholar
• Zhu, Z. Q., and Howe, D., “Instantaneous magnetic field distribution in permanent magnet brushless DC motors. IV. Magnetic field on load,” IEEE Trans. Magn., Vol. 29, No. 1, pp. 152–158, 1993.
   Web of Science ®Google Scholar
• Bash, M. L., and Pekarek, S., “Analysis and validation of a population-based design of a wound-rotor synchronous machine,” IEEE Trans. Energy Convers., Vol. 27, No. 3, pp. 603–614, September 2012.
   Web of Science ®Google Scholar
• Wang, T., and Wang, Q., “Optimization design of a permanent magnet synchronous generator for a potential energy recovery system,” IEEE Trans. Energy Convers., Vol. 27, No. 4, pp. 856–863, December 2012.
   Web of Science ®Google Scholar
• Pellegrino, G., Vagati, A., Boazzo, B., and Guglielmi, P., “Comparison of induction and PM synchronous motor drives for EV application including design examples,” IEEE Trans. Ind. Appl., Vol. 48, No. 6, pp. 2322–2332, November 2012.
   Web of Science ®Google Scholar
• De Donato, G., Capponi, F. G., and Caricchi, F., “Fractional-slot concentrated-winding axial-flux permanent-magnet machine with core-wound coils,” IEEE Trans. Ind. Appl., Vol. 48, No. 2, pp. 630–641, 2012.
   Web of Science ®Google Scholar