183
Views
2
CrossRef citations to date
0
Altmetric
Original Articles

A New High Step-Up DC/DC Converter Structure by Using Coupled Inductor with Reduced Switch-Voltage Stress

, , &
Pages 1705-1719 | Received 01 Apr 2016, Accepted 16 Jul 2017, Published online: 29 Dec 2017

References

  • A. K. Rathore, A. K. S. Bhat, and R. Oruganti, “Analysis, design and experimental results of wide range ZVS active-clamped L–L type current fed DC/DC converter for fuel cells to utility interface,” IEEE Trans. Ind. Electron., vol. 59, no. 1, pp. 473–485, Jan. 2012.
  • E. Babaei, M. E. S. Mahmoodieh, H. M. Mahery, K. I. Hwu, and Y.T. Yau, “Operational modes and output-voltage-ripple analysis and design considerations of buck-boost DC–DC converters,” IEEE Trans. Ind. Electron., vol. 59, no. 1, pp. 381–391, Jan. 2012.
  • T. Zhou and B. Francois, “Energy management and power control of a hybrid active wind generator for distributed power generation and grid integration,” IEEE Trans. Ind. Electron., vol. 58, no. 1, pp. 95–104, Jan. 2011.
  • S. M. Chen, T. J. Liang, L. S. Yang, and J. F. Chen, “A boost converter with capacitor multiplier and coupled inductor for ac module applications,” IEEE Trans. Ind. Electron., vol. 53, no. 1, pp. 1503–1511, Apr. 2013.
  • B. Liu, S. Duan, and T. Cai, “Photovoltaic DC-building-module-based BIPV system—Concept and design considerations,” IEEE Trans. Power Electron., vol. 26, no. 5, pp. 1418–1429, May 2011.
  • A. M. Salamah, S. J. Finney, and B. W. Williams, “Single-phase voltage source inverter with a bidirectional buck–boost stage for harmonic injection and distributed generation,” IEEE Trans. Power Electron., vol. 24, no. 2, pp. 376–387, Feb. 2009.
  • S. B. Kjaer, J. K. Pedersen, and F. Blaabjerg, “A review of single-phase grid-connected inverters for photovoltaic modules,” IEEE Trans. Ind. Electron., vol. 41, no. 5, pp. 1292–1306, Sep./Oct. 2005.
  • X. Wu, J. Zhang, X. Ye, and Z. Qian, “Analysis and derivations for a family ZVS converter based on a new active clamp ZVS cell,” IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 773–781, Feb. 2008.
  • F. Evran and M.T. Aydemir, “Isolated high step-up DC–DC converter with low voltage stress,” IEEE Trans. Power Electron., vol. 29, no. 7, pp. 3591–3603, Jul. 2014.
  • G. Wu, X. Ruan, and Z. Ye, “Non-isolated high step-up DC-DC converters adopting switched-capacitor cell,” IEEE Trans. Ind. Electron, vol. 62, no. 1, pp. 383–393, Jan. 2015.
  • L. Sh. Yang, T. J. Liang, H. C. Lee, and J. F. Chen, “Novel high step-up DC–DC converter with coupled-inductor and voltage-doubler circuit,” IEEE Trans. Ind. Electron., vol. 58, no. 9, pp. 4196–4206, Sep. 2011.
  • G. Spiazzi, P. Mattavelli, and A. Costabeber, “High step-up ratio flyback converter with active clamp and voltage multiplier,” IEEE Trans. Power Electron., vol. 26, no. 11, pp. 3205–3214, Nov. 2011.
  • N. P. Papanikolaou and E. C. Tatakis, “Active voltage clamp in flyback converters operating in CCM mode under wide load variation,” IEEE Trans. Ind. Electron., vol. 51, no. 3, pp. 632–640, Jun. 2004.
  • Y. Zhao, W. Li, and X. He, “Single-phase improved active clamp coupled-inductor-based converter with extended voltage doubler cell,” IEEE Trans. Power Electron., vol. 27, no. 6, pp. 2869–2878, Jun. 2012.
  • Y. P. Hsieh, J. F. Chen, T. J. Liang, and L. S. Yang, “Novel high step-up DC–DC converter for distributed generation system,” IEEE Trans. Ind. Electron., vol. 60, no. 4, pp. 1473–1482, Apr. 2013.
  • S. Jiang, D. Cao, Y. Li, and F. Z. Peng, “Grid-connected boost-half-bridge photovoltaic micro inverter system using repetitive current control and maximum power point tracking,” IEEE Trans. Power Electron., vol. 27, no. 11, pp. 4711–4722, Nov. 2012.
  • S. J. Finney, B.W. Williams, and T. C. Green, “RCD snubber revisited,” IEEE Trans. Ind. Appl., vol. 32, no. 1, pp. 155–160, Jan./Feb. 1996.
  • J. A. Pamilio and J. B. Pagan, “Resonant high voltage source working at resonance for pulse load application,” in Proc. Power Electron. Spec. Conf., 1994, pp. 1413–1421.
  • T. Nouri, S. H. Hosseini, and E. Babaei, “Analysis of voltage and current stresses of a generalised step-up DC–DC converter,” IET Power Electron., vol. 7, no. 6, pp. 1347–1361, June 2014.
  • C. Y. Inaba, Y. Konishi, and M. Nakaoka, “High frequency PWM controlled step-up chopper type DC–DC power converters with reduced peak switch voltage stress,” Proc. Inst. Elect. Eng.—Elect. Power Appl., vol. 151, no. 1, pp. 47–52, Jun. 2004.
  • T. F. Wu, S. Y. Tseng, J. S. Hu, and Y. M. Chen, “Buck and boost derived converter for livestock/poultry stunning applications,” in Proc. 21st Annu.IEEE Appl. Power Electron. Conf. Expo., (APEC '06), Dallas, TX, pp. 1530–1536, 2006.
  • T. Nouri, E. Babaei, and S. H. Hosseini, “A generalized ultra-step-up DC–DC converter for high voltage application with design considerations,” Elect. Power Syst. Res., vol. 105, pp. 71–84, Dec. 2013.
  • G. M. L. Chu, D. D. C. Lu, and V. G. Agelidis, “Flyback-based high step-up converter with reduced power processing stage,” IET Power Electron., vol. 5, no. 3, pp. 349–357, Mar. 2012.
  • Y. Berkovich and B. Axelrod, “Switched-coupled inductor cell for DC-DC converters with very large conversion ratio,” IET Power Electron., vol. 4, no. 3, pp. 309–315, Mar. 2011.
  • D. Vinnikov, and I. Roasto, “Quasi-Z-source-based isolated DC/DC converters for distributed power generation,” IEEE Trans. Ind. Electron., vol. 58, no. 1, pp. 192–201, Jan. 2011.
  • R.-J. Wai, L.-W. Liu, and R.-Y. Duan, “High-efficiency voltage-clamped DC–DC converter with reduced reverse-recovery current and switch-voltage stress,” IEEE Trans. Ind. Electron., vol. 60, no. 4, pp. 272–280, Feb. 2006.
  • L. Muller and J. W. Kimball, “Effects of stray inductance on hard-switched switched capacitor converters,” IEEE Trans. Power Electron., vol. 29, no. 12, pp. 6276–6280, Dec. 2014.
  • Y. M. Ye, K. W. E. Cheng, J. F. Liu, and K. Ding, “A step-up switched capacitor multilevel inverter with self-voltage balancing,” IEEE Trans. Ind. Electron., vol. 61, no. 12, pp. 6672–6680, Dec. 2014.
  • B. Axelrod, Y. Berkovich, and A. Ioinovici, “A cascade boost switched-capacitor-converter–two level inverter with an optimized multilevel output waveform,” IEEE Trans. Circuits Syst., vol. 52, no. 12, pp. 2763–2770, Dec. 2005.
  • B. Gu, J. Lai, and J. Dominic, “Hybrid Transformer ZVS/ZCS DC-DC converter with optimized magnetics and improved power devices utilization for photovoltaic module applications,” IEEE Trans. Power Electron., vol. 30, no. 4, pp. 2127–2136, Apr. 2015.
  • Yu Tang et al., “Dual switches DC/DC converter with three-winding-coupled inductor and charge pump,” IEEE Trans. Power Electron., vol. 31, no. 1, pp. 461–469, Jan. 2016.
  • B. York, W. Yu, and J. Sh. Lai, “An integrated boost resonant converter for photovoltaic applications,” IEEE Trans. Power Electron., vol. 28, no. 3, pp. 1199–1207, Mar. 2013.
  • W. Y. Choi, and J. Y. Choi, “High-efficiency power conditioning system for grid-connected photovoltaic modules,” J. Power Electron., vol. 11, no. 4, pp. 561–567, Sep. 2011.
  • B. York, W. Yu, and J. Sh. Lai, “Hybrid- frequency modulation for PWM integrated resonant – converters,” IEEE Trans. Power Electron., vol. 28, no. 2, pp. 985–994, Feb. 2013.
  • Z. Dongyan, A. Pietkiewicz, and S. Cuk, “A three-switch high voltage converter,” IEEE Trans. Power Electron., vol. 14, no. 1, pp. 177–183, Jan. 1999.
  • D. Vinnikov, I. Roasto, R. Strzelecki, and M. Adamowicz, “Step-Up DC/DC converters with cascaded quasi-Z-source network,” IEEE Trans. Ind. Electron., vol. 59, no. 10, pp. 3727–3736, Oct. 2012.
  • Hu, Xuefeng, and Ch. Gong. “A high voltage gain DC–DC converter integrating coupled-inductor and diode–capacitor techniques,” IEEE Trans. Power Electron., vol. 29 no. 2, pp. 789–800, Feb. 2014.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.