Life Model for PWM Controlled Induction Motor Insulation using Design of Experiments Method

References

• P. O’Donnell, “Report of large motor reliability survey of industrial and commercial installations: Part I,” IEEE Trans. Indus. Appl., vol. I A-21, no. 4, pp. 853–872, 1985.
   Google Scholar
• M. Kaufhold, G. Borner, M. Eberhardt, and J. Speck, “Failure mechanism of the inter turn insulation of low voltage electric machines fed by pulse controlled inverters,” IEEE Elec. Insulation Mag., vol. 12, no. 5, pp. 9–16, 1996.
   Web of Science ®Google Scholar
• K. Niayesh, and E. Gockenbach, “On the aging mechanism of solid insulating materials exposed to repetitive high voltage pulses,” IEEE Trans. Dielectr. Electr. Insulation, vol. 21, no. 1, pp. 304–310, 2014.
   Web of Science ®Google Scholar
• T. Koltunowicz, R. Kochetov, G. Bajracharya, D. Djairam, and J. Smit, “Repetitive transient aging, the influence of repetition frequency,” IEEE Electrical Insulation Conference, Annapolis, USA, pp. 444–448, 2011.
   Google Scholar
• F. Guastavino, A. Ratto, E. Torello, and G. Biondi, “Aging tests on nano-structured enamels for winding wire insulation,” IEEE Trans. Indus. Electron., vol. 61, no. 10, pp. 5550–5557, 2014.
   Web of Science ®Google Scholar
• P. Wang, A. Cavallini, and G. C. Montanari, “The influence of repetitive square wave voltage parameters on enameled wire endurance,” IEEE Trans. Dielectr. Electr. Insulation, vol. 21, no. 3, 2014, pp. 1276–1284.
   Google Scholar
• P. Wang, Mark Fenger, S. R. Campbell, and J. Pedersen, “Motor winding problems caused by inverter drives: an investigation into stator winding failures caused by the voltage surge environment,” IEEE Indus. Appl. Mag., vol. 9, no. 4, pp. 22–31, 2003.
   Web of Science ®Google Scholar
• H. Bonnett, “Analysis of the impact of pulse-width modulated inverter voltage waveforms on AC induction motors,” IEEE Trans. Indus. Appl., vol. 32, no. 2, pp. 386–392, 1996.
   Web of Science ®Google Scholar
• P. Wang, A. Cavallini, G. C. Montanari, and G. Wu, “Effect of rise time on pd pulse features under repetitive square wave voltages,” IEEE Trans. Dielectr. Electr. Insulation, vol. 20, no. 1, pp. 245–254, 2013.
   Web of Science ®Google Scholar
• Weg Technical Guide, “Induction motors fed by PWM frequency inverters.”
   Google Scholar
• Florkowska, M. Florkowski, J. Roehrich, and P. Zydron, “The influence of PWM stresses on degradation process in electrical insulation systems,” IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP), pp. 1–4, 2010.
   Google Scholar
• L. Cao, and S. Grzybowski, “Accelerated aging study on 15 kV XLPE and EPR cables insulation caused by switching impulses,” IEEE Trans. Dielectr. Electr. Insulation, vol. 22, no. 5, pp. 2809–2817, 2015.
   Web of Science ®Google Scholar
• M. S. Moonesan, S. H. Jayaram, and E. A. Cherney, “Time to failure of medium-voltage form-wound machine turn insulation stressed by unipolar square waves,” IEEE Trans. Dielectr. Electr. Insulation, vol. 22, no. 6, pp. 3118–3125, 2015. Dec.
   Web of Science ®Google Scholar
• P. Kreczanik, P. Venet, A. Hijazi, and G. Clerc, “Study of super capacitor aging and lifetime estimation according to voltage, temperature, and rms current,” IEEE Trans. Indus. Electron., vol. 61, no. 9, pp. 4895–4902, 2014. Sept.
   Web of Science ®Google Scholar
• A Gambia/Rema Technical Report “Variable speed drives and motors: motor insulation stresses under pwm inverter operation,” Technical Report No.1., 2nd ed., 2001.
   Google Scholar
• ABB Technical Guide No. 102., “Effects of AC drives on motor insulation,” 1997.
   Google Scholar
• G. C. Montanari, G. Mazzanti, and L. Simoni, “Progress in electrothermal life modeling of electrical insulation during the last decades,” IEEE Trans. Dielectr. Electr. Insulation, vol. 9, no. 5, pp. 730–745, 2002.
   Web of Science ®Google Scholar
• G. C. Montanari, and D. Fabiani, “The effect of non-sinusoidal voltage on intrinsic aging of cable and capacitor insulating materials,” IEEE Trans. Dielectr. Electr. Insulation, vol. 6, no. 6, pp. 798–802, 1999.
   Web of Science ®Google Scholar
• T. G. Arora, M. V. Aware, and D. R. Tutakne, “Fuzzy logic based electrothermal life model for inverter-fed induction motor insulation,” Electric Power Component Syst., vol. 43, no. 3, pp. 298–308, 2015.
   Web of Science ®Google Scholar
• T. G. Arora, M. V. Aware, and D. R. Tutakne, “Fuzzy logic application to life estimation of phase angle controlled induction motors”, 7th IEEE International Symposium on Diagnostics of Electrical Machines, Power Electronics & Drives (Cargèse France), 2009.
   Google Scholar
• D. C. Montgomery, “Design and Analysis of Experiments”. New York, NY, USA: John Wiley & Sons Inc, 2005
   Google Scholar
• R. A. Fisher, “The design of experiments,” Edinburgh: Oliver and Boyd, 1935.
   Google Scholar
• N. Lahoud, J. Faucher, D. Malec, and P. Maussion, “Electrical aging of the insulation of low-voltage machines: Model definition and test with the design of experiments,” IEEE Trans. Indus. Electron., vol. 60, no. 9, pp. 4147–4155, 2013.
   Web of Science ®Google Scholar
• J. Faucher, and P. Maussion, “On-line electrical quality improvement of a single-phase boost rectifier with fuzzy controller and experimental designs,” Electromotion, vol. 13, no. 3, pp. 221–232, 2006.
   Google Scholar
• N. Lahoud, M. Q. Nguyen, P. Maussion, D. Malec, and D. Mary, “Life time model of the inverter-fed motors secondary insulation by using a design of experiments,” IEEE Trans. Dielectr. Electr. Insulation, vol. 22, no. 6, pp. 3170–3176, 2015.
   Web of Science ®Google Scholar