Comparison of Electrical Quantity Characteristics with or without Neural Point on Load Side of 1400MVA Nuclear Power Turbo-generator

References

• H. Wei, F. Wei, and L. Hongchun, “Fault detection design for reactor protection system of Hainan Changjiang nuclear power station,” Nuclear Power Eng., vol. 37, no. 1, pp. 103–108, 2016.
   Google Scholar
• E. P. Jharko, “Towards the implementation of the task of calculating technical and economical indexes for nuclear power plants,” presented at the 2016 International Siberian Conference on Control and Communications, 12–14 May 2016.
   Google Scholar
• Z. Xiaohu, H. Li, and Y. Jianhua, “Numerical simulation of the flow field for rotor ventilation system of large-scale nuclear power turbo-generator,” AMM., vol. 152–154, pp. 1498–1504, 2012.
   Google Scholar
• N. Vahman, R. Akbari-Jeyhouni, D. Rezaei Ochbelagh, and R. Amrollahi, “An assessment of a VVER-1000 core during turbo-generator load reduction test using RELAP5/MOD3.2 and WIMSD-5B/PARCSv2.7,” Prog. Nucl. Energ., vol. 93, pp. 155–164, 2016.
   Web of Science ®Google Scholar
• G. Bao-Jun, G. Wu, and G. Yun-Peng, “Wavelet transform application on transient component analysis for AP1000 nuclear turbo-generator,” presented at the Electronic Engineering and Information Science - Proceedings of the 2015 International Conference on Electronic Engineering and Information Science, Haikou, China, 17–18 January 2015, pp. 537–540.
   Google Scholar
• S. Shuangchen, Z. Quanxi, and H. Shizhu, “The protection equipment of three-phase mini-motor for one-phase operation, Overload and short circuit,” Microcomput. Inform., vol. 18, no. 7, pp. 220–222, 2002.
   Google Scholar
• L. Hua, L. Jinze, and G. Tianming, “Analysis of overload capacity of high-speed permanent magnet synchronous wind-power generator,” Electr. Mach. Control Appl., vol. 40, no. 9, pp. 62–66, 2013.
   Google Scholar
• Y. Zhang, M. Sun, and P. Guo, “No-load characteristics analysis and rated field current calculation of multi-phase synchronous generator based on nonlinear with FEM,” presented at the 2011 International Conference on Electrical and Control Engineering, Yichang, China, 16–18 September 2011, 1628–1632.
   Google Scholar
• Y. Wenxian, P. J. Tavner, and M. Wilkinson, “Condition monitoring and fault diagnosis of a wind turbine with a synchronous generator using wavelet transforms.” 4th IET International Conference on Power Electronics, Machines and Dives, York, UK, 2–4 April 2008, 473–478.
   Google Scholar
• M. Pattnaik, and D. Kastha, “Adaptive speed observer for a stand-alone doubly fed induction generator feeding nonlinear and unbalanced loads,” IEEE Trans Energy Conver., vol. 27, no. 4, pp. 1018–1026, 2012.
   Web of Science ®Google Scholar
• K. Idjdarence, D. Rekioua, T. Rekioua, and A. Tounzi, “Performance of an isolated induction under unbalanced loads,” IEEE Trans Energy Conver., vol. 25, no. 2, pp. 303–311, 2010.
   Web of Science ®Google Scholar
• B. Barahona, N. A. Cutululis, A. D. Hansen, and P. Sorencen, “Unbalanced voltage faults: the impact on structure loads of doubly fed asynchronous generator wind turbines,” Wind Energ., vol. 17, no. 8, pp. 1123–1135, 2014.
   Web of Science ®Google Scholar
• L. Wang and S.-L. Kuo, “Steady state performance of a self-excited induction generator under unbalanced load.” Proceedings of the IEEE Power Engineering Society Transmission and Distribution Conference, Taiwan, 27–31 January 2002, 408–412.
   Google Scholar
• R. Pena, R. Cardenas, E. Escobar, J. Clare, and P. Wheeler, “Control strategy for a doubly-fed induction generator feeding an unbalanced grid or stand-alone load,” EPSR., vol. 79, no. 2, pp. 355–364, 2009.
   Google Scholar
• Z. Wang, Y. Sun, G. Li, and Z. Li, “Stator current harmonics analysis of doubly-fed induction generator,” Electr. Power Autom. Equip., vol. 30, no. 6, pp. 1–5, 2010.
   Google Scholar
• B. Ge, S. Xiao, Y. Lv, and Z. Liu, “Transient current study of hydro-generator stator winding internal fault,” EI, vol. 18, no. 3, pp. 40–45, 2014.
   Google Scholar
• B.-J. Ge, W. Guo, and Y.-P. Gao, “Transient negative-sequence component calculation for large generator based on wavelet transform,” IARAS, vol. 8, no. 10, pp. 81–90, 2015.
   Google Scholar
• V. A. Balagurov, A. A. Ketsaris, and V. V. Lokhnin, “Design of the external characteristics of an asynchronous generator,” Elektrotekhnika, vol. 2, pp. 24–26, 1974.
   Google Scholar
• Y. Lemei, W. Xinzhen, and Z. Xiaoqin, “External characteristics of self-excited induction generators under steady state operation,” Adv. Mat. Res., vol. 460, pp. 403–406, 2012.
   Google Scholar
• P. Lv, B. Ge, D. Tao, J. Yin, and H. Zhao, “A novel method for electromagnetic torque calculation applying positive and negative sequence current vectors,” Int. J. Appl. Electrom., vol. 51, no. 4, pp. 391–403, 2016.
   Web of Science ®Google Scholar
• A. Abedini Mohammadi, H. Oraee, A. Oraee, and S. Taghipour Boroujeni, “Approach for analytical modelling of axial-flux PM machines,” IET. Electr. Power. App., vol. 10, no. 6, pp. 441–450, 2016.
   Web of Science ®Google Scholar
• L. Petkovska, G. Cvetkovski, and P. Lefley, “Analysis of the stator topology impact on cogging torque for surface permanent magnet motor,” COMPEL., vol. 34, no. 2, pp. 456–474, 2015.
   Web of Science ®Google Scholar
• B. Ge, P. Lv, D. Tao, F. Xiao , and H. Zhao, “Research on magnetic field state analysis of non-salient pole synchronous generator,” Turk. J. Electrl. Eng. Co., vol. 25, no. 3, pp. 1680–1692, 2017.
   Web of Science ®Google Scholar
• S. Rajkumar, K. Sedhuraman, and D. Balaji, “High torque to weight ratio and cost estimation of cage induction motor with finite element method for hybrid vehicle,” presented at the 2017 International Conference on Innovative Research in Electrical Sciences, Nagapattinam, Tamilnadu, India, 16–17 June 2017.
   Google Scholar
• T. Zhang, X. Liu, and L. Mo, “Modeling and analysis of hybrid permanent magnet type bearingless motor,” IEEE Trans. Magn., vol. 54, no. 3, pp. 8102804, 2018.
   Web of Science ®Google Scholar
• Y.-Y. Yao and L. Guang, “Analysis of negative sequence ability of hydro-generator based on equivalent time-harmonic coupled finite-element method,” EI, vol. 15, no. 11, pp. 33–39, 2015.
   Google Scholar
• L. Wei, Z. Hao-Quan, and Q. Yang, “Finite element analysis for outer-movement accidents of stator core laminated sheets of hydro-generator,” J. Zhejiang Univ., vol. 44, no. 5, pp. 1032–1037, 2010.
   Google Scholar
• J. Wang, F. Hu, and J. Weidong, “Investigation of zero sequence circulating current suppression for parallel Three-Phase Grid-Connected converters without communication,” IEEE. Trans. Industr. Electron., 2018.
   PubMed Web of Science ®Google Scholar
• D. Miles, M. Nick, and P. Aadityaa, “Negative-sequence overcurrent considerations for induction motor loads.” Presented at the 70th Annual Conference for Protective Relay Engineers, College Station, TX, United States, 3–6 April 2017.
   Google Scholar