118
Views
4
CrossRef citations to date
0
Altmetric
Original Articles

A New Control Strategy of 5-Phase PM Motor under Open-Circuited Phase Based on High Order Sliding Mode and Current References Real-Time Generation

, , , &
Pages 261-274 | Received 30 Jan 2017, Accepted 16 Jan 2019, Published online: 04 Mar 2019

References

  • E. Levi, E. Bojoi, F. Profumo, H. Toliyat, and S. Williamson, “Multi-phase induction motor drives - a technology status review,” IET Electr. Power Appl., vol. 1, no. 4, pp. 489–516, 2007.
  • P. Norton, and P. Thompson, “The naval electric ship of today and tomorrow”. Proc. 3rd All Electric Ship Symp, Paris, France, Oct. 26–27, 2000, pp. 80–86.
  • P. Letellier, “High power permanent magnet machines for electric propulsion drives,” in Proc. of the All Electric Ship Symposium, Paris, France, Oct. 26–27 2000, pp. 126–132.
  • O. Fall, J. F. Charpentier, K. Nguyen, and P. Letellier, “Performances comparison of different concentrated-winding configurations for 5-phase PMSG in normal and faulty modes in flux weakening operation for fixed pitch tidal turbines,” 2016 XXII International Conference on Electrical Machines (ICEM), Lausanne, 2016, pp. 2789–2795.
  • F. Mekri, S. Benelghali, and M. Benbouzid, “Fault-tolerant control performance comparison of three- and Five-Phase PMSG for marine current turbine applications,” IEEE, Transactions on Sustainable Energy, IEEE, vol. 4, no. 2, pp. 425–433, 2013.
  • C. Olmi, F. Scuiller, and J. F. Charpentier, “Impact of a multi-star winding on the reliability of a permanent magnet generator for marine current turbine,” International Journal of Marine Energy, vol. 19, pp. 319–331, 2017.
  • F. Scuiller, E. Semail, J. F. Charpentier, and P. Letellier, “Multi-criteria-based design approach of multi-phase permanent magnet low-speed synchronous machines,” IET Electr. Power Appl., vol. 3, no. 2, pp. 102–110, 2009.
  • F. Baudart, B. Dehez, E. Matagne, D. Telteu-Nedelcu, P. Alexandre, and F. Labrique, “Torque control strategy of polyphase permanent-magnet synchronous machines with minimal controller reconfiguration under open-circuit fault of one phase,” IEEE Trans. Ind. Electron., vol. 59, no. 6, pp. 2232–2644, 2012.
  • S. Dwari, and L. Parsa, “Fault-tolerant control of five-phase permanentmagnet motors with trapezoidal back EMF,” IEEE Trans. Ind. Electron., vol. 58, no. 2, pp. 476–485, 2011.
  • A. Mohammad, S. Sadeghi, and L. Parsa, “Generalized fault-tolerant control strategy for five-phase PM motor drives considering star, pentagon, and pentacle connections stator windings,” IEEE Trans. Indus. Electron., vol. 61, no. 1, pp. 63–75, 2014.
  • F. Mekri, J. F. Charpentier, S. Benelghali, and X. Kestelyn, “Simulation and experimental validation of control of five phase permanent magnet motor under open circuit fault conditions” IEEE VPPC 2010, Lille, France.
  • L. Parsa, and H. A. Toliyat, “Five-phase permanent –magnet motor drives,” IEEE Trans. Ind. Appl., vol. 41, no. 1, pp. 30–37, 2005.
  • F. Locment, E. Semail, and V. Kestelyn, “Approach based control of a seven- phase axial flux machine designed for fault operation,” IEEE Trans Ind. Electron., vol. 55, no. 10, pp. 3682–3691, 2008.
  • X. Kestelyn, and E. Semail, “A vectorial approach for generation of optimal current references for multiphase permanent magnet synchronous machines in real-time,” IEEE Trans. Ind. Electron., vol. 58, no. 11, pp. 5057–5065, 2011.
  • K. M. Rahman, M. R. Khan, M. A. Choudhury, and M. A. Rahman, “Variable band hysteresis current controllers for PWM voltage source inverters,” IEEE Trans. Power Electron., vol. 12, no. 6, pp. 964–970, 1997.
  • L. Parsa, and H. A. Toliyat, “Multi-phase permanent magnet motor drives” Proc. IEEE-IAS annual meetings, Salt Lake City (UT), October 12–16, 2003.
  • J. P. Martin, S. Pierfederici, F. M. Tabar, and P. Letellier, “Synthèse des méthodes de filtrage du couple des MSAP polyphasées en modes normal et dégrade,” Eur. J. Electr. Eng., vol. 10, no. 1–2, pp. 117–149, 2007.
  • X. Kestelyn, Modélisation vectorielle multimachines pour la commande des ensembles convertisseurs machines polyphasés, Ph.D. thesis, Universty of Sciences and Technologies of Lille, 2003.
  • S. Dwari, and L. Parsa, “An optimal control technique for multiphase PM machines under open – Circuit fautls,” IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 1988–1995, 2008.
  • E. Levi, M. Jones, S. N. Vukosavic, and H. A. Toliyat, “Operating principles of a novel multiphase multimotor vector –controlled drive,” IEEE Trans. Energy Conversion, vol. 19, no. 3, pp. 508–517, 2004.
  • L. Parsa, and H. A. Toliyat, “Sensorless direct torque control of five phase interior permanent magnet motor drives,” IEEE Trans. Ind. Appl., vol. 43, no. 4, pp. 952–959, 2007.
  • E. Semail, A. X. Kestelyn, and A. Bousscayrol, “Sensitivity of a 5 phase Brushless DC machine to 7th harmonic of back-electromotrice force’’, PESC 2004 IEEE Power Electronics, Germany, 2004, CD-ROM.
  • L. Fridman, and A. Levant, “Higher Order Sliding Modes,” in Sliding Mode Control in Engineering, chap. 3. New York, NY: Marcel Dekker, Inc., 2002, pp. 53–101.
  • F. Valenciaga, and P. F. Puleston, “High-order sliding control for a wind energy conversion system based on a permanent magnet synchronous generator,” IEEE Trans. Energy Conversion, vol. 23, no. 3, pp. 860–867, 2008.
  • A. Levant, and L. Alelishvili, “Integral high-order sliding modes,” IEEE Trans. Automatic Control, vol. 52, no. 7, pp. 1278–1282, 2007.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.