Sizing Optimization Methodology of Tidal Energy Conversion Chain Based on Double Stator Permanent Magnet Generator

References

• P. B. L. Neto, O. R. Saavedra, and L. A. de Souza Ribeiro, “Analysis of a tidal power plant in the estuary of Bacanga in Brazil taking into account the current conditions and constraints,” IEEE Trans. Sustain. Energy, vol. 8, no. 3, pp. 1187–1194, Jul. 2017. DOI: 10.1109/TSTE.2017.2666719.
   Web of Science ®Google Scholar
• R. Martin-Short, et al., “Tidal resource extraction in the Pentland Firth, UK: Potential impacts on flow regime and sediment transport in the Inner Sound of Stroma,” Renewable Energy, vol. 76, pp. 596–607, 2015. DOI: 10.1016/j.renene.2014.11.079.
   Web of Science ®Google Scholar
• H. Chen, N. Ait-Ahmed, M. Machmoum, and M. E.-H. Zaim, “Modeling and vector control of marine current energy conversion system based on doubly salient permanent magnet generator,” IEEE Trans. Sustain. Energy, vol. 7, no. 1, pp. 409–418, Jan. 2016. DOI: 10.1109/TSTE.2015.2497903.
   Web of Science ®Google Scholar
• M. Hosseinzadeh and F. R. Salmasi, “Fault-tolerant supervisory controller for a hybrid AC/DC micro-grid,” IEEE Trans. Smart Grid, vol. 9, no. 4, pp. 2809–2823, Jul 2018. DOI: 10.1109/TSG.2016.2620803.
   Web of Science ®Google Scholar
• M. Hosseinzadeh and F. R. Salmasi, “Analysis and detection of a wind system failure in a micro-grid,” J. Renewable Sustain. Energy, Vol. vol. 8, no. 4, 2016.
   Web of Science ®Google Scholar
• W. Yang, P. J. Tavner, and M. R. Wilkinson, “Condition monitoring and fault diagnosis of a wind turbine synchronous generator drive train,” IET Renewable Power Gen., vol. 3, no. 1, pp. 1–11, 2009. DOI: 10.1049/iet-rpg:20080006.
   Web of Science ®Google Scholar
• S. L. Ho, S. Niu, and W. N. Fu, “A new dual-stator bidirectional-modulated PM machine and its optimization,” IEEE Trans. Magn., vol. 50, no. 11, pp. 1–4, Nov. 2014. DOI: 10.1109/TMAG.2014.2329999.
   Web of Science ®Google Scholar
• Q. Wang, S. Niu, and L. Yang, “Design optimization and comparative study of novel dual-PM excited machines,” IEEE Trans. Ind. Electron., vol. 64, no. 12, pp. 9924–9933, Dec. 2017. DOI: 10.1109/TIE.2017.2716869.
   Web of Science ®Google Scholar
• Z. Wang, Y. Wang, J. Chen, and M. Cheng, “Fault-tolerant control of NPC three-level inverters-fed double-stator-winding PMSM drives based on vector space decomposition,” IEEE Trans. Ind. Electron., vol. 64, no. 11, pp. 8446–8458, Nov. 2017. DOI: 10.1109/TIE.2017.2701782.
   Web of Science ®Google Scholar
• J. Zhang, A. Houari, A. Seck, L. Moreau, and M. Machmoum, “Fault tolerant control of a double stator permanent magnet generator in tidal current energy system,” presented at the 2016 IEEE International Conference on Industrial Technology (ICIT), Taipei, 2016, pp. 419–424.
   Google Scholar
• Y. Duan and R. G. Harley, “A novel method for multiobjective design and optimization of three phase induction machines,” IEEE Trans. Ind. Appl., vol. 47, no. 4, pp. 1707–1715, July-Aug. 2011. DOI: 10.1109/TIA.2011.2156372.
   Web of Science ®Google Scholar
• C. Carlos, L. Gary, and V. David, Evolutionary Algorithms for Solving Multi-Objective Problems. New York, NY, USA: Springer, 2007.
   Google Scholar
• Optimal design of tidal power generator using stochastic optimization techniques, Norwegian University of Science and Technology, June 2014.
   Google Scholar
• J. Aubry, Optimisation du dimensionnement d’une chaîne de conversion électrique directe incluant un système de lissage de production par supercondensateurs. Application au houlogénérateur SEAREV., Ph.D. dissertation, Ecole Nationale Supérieure de Cachan, France, 2011.
   Google Scholar
• Z. Zhou, F. Scuiller, J. F. Charpentier, M. E. H. Benbouzid, and T. Tang, “Power control of a nonpitchable PMSG-based marine current turbine at overrated current speed with flux-weakening strategy,” IEEE J. Ocean. Eng., vol. 40, no. 3, pp. 536–545, July 2015. DOI: 10.1109/JOE.2014.2356936.
   Web of Science ®Google Scholar
• C. Xia, L. Guo, Z. Zhang, T. Shi, and H. Wang, “Optimal designing of permanent magnet cavity to reduce iron loss of interior permanent magnet machine,” IEEE Trans. Magn., vol. 51, no. 12, pp. 1–9, Dec. 2015. DOI: 10.1109/TMAG.2015.2451105.
   Web of Science ®Google Scholar
• P. Zhang, et al., “Multi-objective tradeoffs in the design optimization of a brushless permanent-magnet machine with fractional-slot concentrated windings,” IEEE Trans. Ind. Appl., vol. 50, no. 5, pp. 3285–3294, Sept.–Oct. 2014. DOI: 10.1109/TIA.2014.2309716.
   Web of Science ®Google Scholar
• G. Y. Sizov, P. Zhang, D. M. Ionel, N. A. O. Demerdash, and M. Rosu, “Automated multi-objective design optimization of PM AC machines using computationally efficient FEA and differential evolution,” IEEE Trans. Ind. Appl., vol. 49, no. 5, pp. 2086–2096, Sept.–Oct. 2013. DOI: 10.1109/TIA.2013.2261791.
   Web of Science ®Google Scholar
• A. Hayes, L. Sethuraman, K. Dykes, and L. J. Fingersh, “Structural optimization of a direct-drive wind turbine generator inspired by additive manufacturing,” Proc. Manuf., vol. 26, pp. 740–752, 2018. DOI: 10.1016/j.promfg.2018.07.084.
   Google Scholar
• S. Y. Jung, H. Jung, S. C. Hahn, H. K. Jung, and C. G. Lee, “Optimal design of direct-driven PM wind generator for maximum annual energy production,” IEEE Trans. Magn., vol. 44, no. 6, pp. 1062–1065, June 2008.
   Web of Science ®Google Scholar
• H. Li and Z. Chen, “Design optimization and site matching of direct-drive permanent magnet wind power generator systems, Renewable Energy, vol. 34, No. no. 4, 2009.
   Web of Science ®Google Scholar
• J. Pyrhönen, T. Jokinen, and V. Hrabovcová, Design of Rotating Electrical Machines. Chichester, West Sussex, UK: John Wiley & Sons, 2014.
   Google Scholar
• P. Salminen, Fractional slot permanent magnet synchronous motor for low speed application, Ph.D. dissertation, Lappeenranta University of Technology, 2004.
   Google Scholar
• Alternateurs installation et maintenance, Leroy Somer, Technical Report, 2011.
   Google Scholar
• Non oriented electrical steel, Cogent Power, Technical Report, 2013.
   Google Scholar
• N. Bernard, F. Martin, and M. E. H. Zaïm, “Design methodology of a permanent magnet synchronous machine for a screwdriver application,” IEEE Trans. Energy Conversion, vol. 27, no. 3, pp. 624–633, 2012. DOI: 10.1109/TEC.2012.2199494.
   Web of Science ®Google Scholar
• A. Rezzoug and M. E.-H. Zaïm, Non-conventional electrical machines. Hoboken, NJ, USA: John Wiley & Sons, 2013.
   Google Scholar
• M. E.-H. Zaïm, Conception de machines electriques, Polytech de Nantes, Technical Report, 2014.
   Google Scholar
• Y. Alexandrova, Wind turbine direct-drive permanent-magnet generator with direct liquid cooling for mass reduction, Ph.D. dissertation, Lappeenranta University of Technology, 2014.
   Google Scholar
• J. Aubry, H. Ben Ahmed, and B. Multon, “Sizing optimization methodology of a surface permanent magnet machine-converter system over a torque-speed operating profile: Application to a wave energy converter,” IEEE Trans. Ind. Electron., vol. 59, no. 5, pp. 2116–2125, May. 2012. DOI: 10.1109/TIE.2011.2163287.
   Web of Science ®Google Scholar
• A. S. Mcdonald, M. A. Mueller, and H. Polinder, “Structural mass in direct-drive permanent magnet electrical generators,” IET Renewable Power Gen., vol. 2, no. 1, pp. 3–15, 2008. DOI: 10.1049/iet-rpg:20070071.
   Web of Science ®Google Scholar
• A. Grauers, Design of direct-driven permanent-magnet generators, Ph.D. dissertation, Chalmers University, 1996.
   Google Scholar
• J. Aubry, et al., “Minimization of the kWh cost by optimization of an all-electric chain for the SEAREV Wave Energy Converter,” presented at the Proceedings of the 2nd International Conference on Ocean Energy (ICOE 2008), 2008, pp. 1–7.
   Google Scholar
• Renewable power generation costs, IRENA, Technical Report, 2012.
   Google Scholar
• P. Schwabe, S. Lensink, and M. Hand, IEA wind task 26, IEA, Technical Report, 2011.
   Google Scholar
• J. Zhang, Optimization design and control strategies of a double stator permanent magnet generator for tidal current energy application, Ph.D. dissertation, Université de Nantes, 2015.
   Google Scholar
• B. Multon, et al., “Comparaison du couple massique de diverses architectures de machines tournantes synchrones à aimants,” Revue de L’Electricité et de L’Electronique, pp. 85, 2006.
   Google Scholar
• A. Grauers and P. Kasinathan, “Force density limits in low-speed PM machines due to temperature and reactance,” IEEE Trans. Energy Conversion, vol. 19, no. 3, pp. 518–525, 2004. DOI: 10.1109/TEC.2004.832059.
   Web of Science ®Google Scholar
• B. Sanderse, Aerodynamics of wind turbine wakes: Literature review, Energy research Centre of the Netherlands (ECN), Technical Report, 2009.
   Google Scholar
• L. M. Tossas and S. Leonardi, Wind turbine modeling for computational fluid dynamics, NREL, Technical Report, July, 2013.
   Google Scholar
• F. Zahle and N. Sorensen, “Characterization of the unsteady flow in the nacelle region of a modern wind turbine,” Wind Energy, vol. 14, no. 2, pp. 271–283, 2011. DOI: 10.1002/we.418.
   Web of Science ®Google Scholar