V/f with Stabilizing Loops and MTPA versus Sensorless FOC for PMSM Drives

References

• G. S. Buja and M. P. Kazmierkowski, “Direct torque control of PWM inverter-fed AC motors - A survey,” IEEE Trans. Ind. Electron., vol. 51, no. 4, pp. 744–757, Apr. 2004. DOI: 10.1109/TIE.2004.831717.
   Web of Science ®Google Scholar
• I. Boldea, A. Moldovan, and L. Tutelea, “Scalar V/f and I-f control of AC motor drives: an overview,” presented at the Proc. Int. Conf. on Optimization of Electrical & Electronic Equipment (OPTIM 2015), Side, Turkey, Sep. 2015, pp. 8–17.
   Google Scholar
• A. Shinohara, Y. Inoue, S. Morimoto, and M. Sanada, “Direct calculation method of reference flux linkage for maximum torque per ampere control in DTC-based IPMSM drives,” IEEE Trans. Power Electron., vol. 32, no. 3, pp. 2114–2122, Mar. 2017. DOI: 10.1109/TPEL.2016.2569140.
   Web of Science ®Google Scholar
• H. Ge, Y. Miao, B. Bilgin, B. Nahid-Mobarakeh, and A. Emadi, “Speed range extended maximum torque per ampere control for PM drives considering inverter and motor nonlinearities,” IEEE Trans. Power Electron., vol. 32, no. 9, pp. 7151–7159, Sep. 2017. DOI: 10.1109/TPEL.2016.2630051.
   Web of Science ®Google Scholar
• Y. Zhao, C. Wei, Z. Zhang, and W. Qiao, “A review on position/speed sensorless control for permanent-magnet synchronous machine-based wind energy conversion systems,” IEEE J. Emerg. Sel. Topics Power Electron., vol. 1, no. 4, pp. 203–216, Dec. 2013. DOI: 10.1109/JESTPE.2013.2280572.
   Web of Science ®Google Scholar
• S.-K. Sul, Y.-C. Kwon, and Y. Lee, “Sensorless control of IPMSM for last 10 years,” Trans. Electr. Mach. Syst., vol. 1, no. 2, pp. 91–99, Jun. 2017. DOI: 10.23919/TEMS.2017.7961290.
   Google Scholar
• D. Xu, B. Wang, G. Zhang, G. Wang, and Y. Yu, “A review of sensorless control methods for AC motor drives,” Trans. Electr. Mach. Syst., vol. 2, no. 1, pp. 104–115, Mar. 2018. DOI: 10.23919/TEMS.2018.8326456.
   Google Scholar
• S. Morimoto, M. Sanada, and Y. Takeda, “Mechanical sensorless drives of IPMSM with online parameter identification,” IEEE Trans. Ind. Appl., vol. 42, no. 5, pp. 1241–1248, Sep.–Oct. 2006. DOI: 10.1109/TIA.2006.880840.
   Web of Science ®Google Scholar
• Y. Tang et al., “Back-EMF-based sensorless control system of hybrid SRM for high-speed operation,” IET Electric Power Appl., vol. 12, no. 6, pp. 867–873, Jul. 2018. DOI: 10.1049/iet-epa.2017.0641.
   Web of Science ®Google Scholar
• Y. Lee and S.-K. Sul, “Model-based sensorless control of an IPMSM with enhanced robustness against load disturbances based on position and speed estimator using a speed error,” IEEE Trans. Ind. Appl., vol. 54, no. 2, pp. 1448–1459, Mar.–Apr. 2018. DOI: 10.1109/TIA.2017.2777390.
   Web of Science ®Google Scholar
• A. T. Nguyen, M. S. Rafaq, H. H. Choi, and J.-W. Jung, “A model reference adaptive control based speed controller for a surface-mounted permanent magnet synchronous motor drive,” IEEE Trans. Ind. Electron., vol. 65, no. 12, pp. 9399–9409, Dec. 2018. DOI: 10.1109/TIE.2018.2826480.
   Web of Science ®Google Scholar
• I. Boldea, M. C. Paicu, and G.-D. Andreescu, “Active flux concept for motion-sensorless unified AC drives,” IEEE Trans. Power Electron., vol. 23, no. 5, pp. 2612–2618, May 2008. DOI: 10.1109/TPEL.2008.2002394.
   Web of Science ®Google Scholar
• P. L. Xu, Z. Q. Zhu, and D. Wu, “Carrier signal injection-based sensorless control of permanent magnet synchronous machines without the need of magnetic polarity identification,” IEEE Trans. Ind. Appl., vol. 52, no. 5, pp. 3916–3926, Sep.–Oct. 2016. DOI: 10.1109/TIA.2016.2560803.
   Web of Science ®Google Scholar
• Y.-D. Yoon, S.-K. Sul, S. Morimoto, and K. Ide, “High-bandwidth sensorless algorithm for AC machines based on square-wave-type voltage injection,” IEEE Trans. Ind. Appl., vol. 47, no. 3, pp. 1361–1370, May–Jun. 2011. DOI: 10.1109/TIA.2011.2126552.
   Web of Science ®Google Scholar
• C.-E. Hwang, Y. Lee, and S.-K. Sul, “Analysis on position estimation error in position-sensorless operation of IPMSM using pulsating square wave signal injection,” IEEE Trans. Ind. Appl., vol. 55, no. 1, pp. 458–470, Jan.–Feb. 2019. DOI: 10.1109/TIA.2018.2864117.
   Web of Science ®Google Scholar
• A. Piippo, M. Hinkkanen, and J. Luomi, “Adaptation of motor parameters in sensorless PMSM drives,” IEEE Trans. Ind. Appl., vol. 45, no. 1, pp. 203–212, Jan./Feb. 2009. DOI: 10.1109/TIA.2008.2009614.
   Web of Science ®Google Scholar
• A. Yousefi-Talouki, P. Pescetto, G. Pellegrino, and I. Boldea, “Combined active flux and high-frequency injection methods for sensorless direct-flux vector control of synchronous reluctance machines,” IEEE Trans. Power Electron., vol. 33, no. 3, pp. 2447–2457, Mar. 2018. DOI: 10.1109/TPEL.2017.2697209..
   Web of Science ®Google Scholar
• P. D. C. Perera, F. Blaabjerg, J. K. Pedersen, and P. Thogersen, “A sensorless, stable V/f control method for PMSM drives,” IEEE Trans. Ind. Appl., vol. 39, no. 3, pp. 783–791, 2003. May–Jun. 2003, DOI: 10.1109/TIA.2003.810624.
   Web of Science ®Google Scholar
• R. Ancuti, I. Boldea, and G.-D. Andreescu, “Sensorless V/f control of high-speed surface permanent magnet synchronous motor drives with two novel stabilising loops for fast dynamics and robustness,” IET Electr. Power Appl., vol. 4, no. 3, pp. 149–157, Mar. 2010. DOI: 10.1049/iet-epa.2009.0077.
   Web of Science ®Google Scholar
• S.-C. Agarlita, C.-E. Coman, G.-D. Andreescu, and I. Boldea, “Stable V/f control system with controlled power factor angle for permanent magnet synchronous motor drives,” IET Electric Power Appl., vol. 7, no. 4, pp. 278–286, Apr. 2013. DOI: 10.1049/iet-epa.2012.0392.
   Web of Science ®Google Scholar
• A. Consoli, G. Scelba, G. Scarcella, and M. Cacciato, “An effective energy-saving scalar control for industrial IPMSM drives,” IEEE Trans. Ind. Electron., vol. 60, no. 9, pp. 3658–3669, Sep. 2013. DOI: 10.1109/TIE.2012.2207651.
   Web of Science ®Google Scholar
• I. Boldea, A. Moldovan, V. Schramel-Coroban, G. D. Andreescu, and L. Tutelea, “A class of fast dynamics V/f sensorless AC general drives with PM-RSM as a case study,” presented at the Proc. 12th Int. Conf. on Optimization of Electrical and Electronic Equipment (OPTIM 2010), Basov, Romania, May 2010, pp. 453–459.
   Google Scholar
• Z. Tang, X. Li, S. Dusmez, and B. Akin, “A new V/f-based sensorless MTPA control for IPMSM drives,” IEEE Trans. Power Electron., vol. 31, no. 6, pp. 4400–4415, Jun. 2016. DOI: 10.1109/TPEL.2015.2470177.
   Web of Science ®Google Scholar
• A.-S. Isfanuti, M.-C. Paicu, L.-N. Tutelea, T. Staudt, and I. Boldea, “V/f with stabilizing loops versus FOC of Spoke-PM rotor SM drive: control with experiments,” presented at the Proc. IEEE 18th Int. Power Electronics and Motion Control Conference (PEMC 2018), Budapest, Hungary, Aug. 2018, pp. 629–636.
   Google Scholar
• F. J. H. Kalluf, A. S. Isfanuti, L. N. Tutelea, A. Moldovan-Popa, and I. Boldea, “1-kW 2000–4500 r/min ferrite PMSM drive: comprehensive characterization and two sensorless control options,” IEEE Trans. Ind. Appl., vol. 52, no. 5, pp. 3980–3989, Sep.–Oct. 2016. DOI: 10.1109/TIA.2016.2574776.
   Web of Science ®Google Scholar
• J. Holtz and J. Quan, “Drift- and parameter-compensated flux estimator for persistent zero-stator-frequency operation of sensorless-controlled induction motors,” IEEE Trans. Ind. Appl., vol. 39, no. 4, pp. 1052–1060, Jul.–Aug. 2003. DOI: 10.1109/TIA.2003.813726.
   Web of Science ®Google Scholar
• Y. Park and S.-K. Sul, “A novel method utilizing trapezoidal voltage to compensate for inverter nonlinearity,” IEEE Trans. Power Electron., vol. 27, no. 12, pp. 4837–4846, Dec. 2012. DOI: 10.1109/TPEL.2012.2192451.
   Web of Science ®Google Scholar