References
- E. Levi, R. Bojoi, F. Profumo, H. A. Toliyat, and S. Williamson, “Multiphase induction motor drives – A technology status review,” IET Electr. Power Appl., vol. 1, no. 4, pp. 489–516, 2007. DOI: https://doi.org/10.1049/iet-epa:20060342.
- A. Pantea et al., “Six-phase induction machine model for electrical fault simulation using the circuit-oriented method,” IEEE Trans. Ind. Electron., vol. 63, no. 1, pp. 494–503, Jan. 2016. DOI: https://doi.org/10.1109/TIE.2015.2493727.
- Z. Liu, Y. Li, and Z. Zheng, “A review of drive techniques for multiphase machines,” Trans. Electr. Mach. Syst., vol. 2, no. 2, pp. 243–251, Jun. 2018. DOI: https://doi.org/10.30941/CESTEMS.2018.00030.
- A. S. Abdel-Khalik, M. S. Hamad, A. M. Massoud, and S. Ahmed, “Postfault operation of a nine-phase six-terminal induction machine under single open-line fault,” IEEE Trans. Ind. Electron., vol. 65, no. 2, pp. 1084–1096, Feb. 2018. DOI: https://doi.org/10.1109/TIE.2017.2733471.
- Y. Maouche, M. El, K. Oumaamar, A. Khezzar, and H. Razik, “Analysis of stator current of dual-three phase induction motor drive under broken bar fault condition,” Proceedings of 13th IEEE Conference on Industrial Electronics and Applications (ICIEA), Wuhan, China, 2018.
- Z. Kuang et al., “Thermal analysis of fifteen-phase permanent magnet synchronous motor under different fault tolerant operations,” IEEE Access., vol. 7, pp. 81466–81480, Jun. 2019. DOI: https://doi.org/10.1109/ACCESS.2019.2921993.
- C. R. da Silva et al., “A new approach for inter-turn short-circuit detection in six-phase induction motor,” Proceeding of IECON, Paris, France, Nov. 2006, pp. 4969–4974.
- I. Gonzalez, M. J. Duran, H. S. Che, E. Levi, and F. Barrero, “Fault tolerant control of six-phase induction generators in wind energy conversion systems with series–parallel machine-side converters,” Proceeding of IECON, Vienna, Austria, Nov. 2013, pp. 5276–5281.
- L. Alberti and N. Bianchi, “Experimental tests of dual three-phase induction motor under faulty operating condition,” IEEE Trans. Ind. Electron., vol. 59, no. 5, pp. 2041–2048, May 2012. DOI: https://doi.org/10.1109/TIE.2011.2171175.
- S. Miranda, C. B. Jacobina, and A. M. N. Lima, “Modeling and analysis of six-phase induction machine under fault condition,” Proceeding of COBEP, Bonito-Mato, Brazil, Sep. 2009, pp. 824–830.
- A. S. Abdel-Khalik, R. A. Hamdi, A. M. Massod, and S. Ahmed, “Postfault control of scalar (V/f) controlled asymmetrical six-phase induction machines,” IEEE Access., vol. 6, pp. 59211–59220, Oct. 2018. DOI: https://doi.org/10.1109/ACCESS.2018.2874133.
- Y. Geng et al., “Low-order space harmonic modeling of asymmetrical six-phase induction machines,” IEEE Access., vol. 7, pp. 6866–6876, Dec. 2019.
- Y. Geng, Z. Lai, Y. Li, D. Wang, R. Chen and P. Zheng, “Sensorless fault-tolerant control strategy of six-phase induction machine based on harmonic suppression and sliding mode observer,” IEEE Access., vol. 7, pp. 110086–110102, Aug. 2019. DOI: https://doi.org/10.1109/ACCESS.2019.2933407.
- D. Foito, J. Maia, V. Fernão Pires, and J. F. Martins, “Fault diagnosis in six-phase induction motor using a current trajectory mass center,” Measurement, vol. 51, pp. 164–173, May 2014. DOI: https://doi.org/10.1016/j.measurement.2014.02.004.
- M. J. Duran, I. Gonzalez-Prieto, N. Rios-Garcia, and F. Barrero, “A simple, fast, and robust open-phase fault detection technique for six-phase induction motor drives,” IEEE Trans. Power Electron., vol. 33, no. 1, pp. 547–557, Jan. 2018. DOI: https://doi.org/10.1109/TPEL.2017.2670924.
- H. S. Che et al., “Postfault operation of an asymmetrical six-phase induction machine with single and two isolated neutral points,” IEEE Trans. Power Electron., vol. 29, no. 10, pp. 5406–5416, Nov. 2014. DOI: https://doi.org/10.1109/TPEL.2013.2293195.
- M. J. Duran and F. Barrero, “Recent advantages in the design, modelling, and control of multiphase machines – Part II,” IEEE Trans. Ind. Electron., vol. 63, no. 1, pp. 459–468, Jan. 2016. DOI: https://doi.org/10.1109/TIE.2015.2448211.
- M. Ojaghi, M. Sabouri, and J. Faiz, “Diagnosis methods for stator winding faults in three-phase squirrel-cage induction motors,” Int. Trans. Electr. Energ. Syst., vol. 24, no. 6, pp. 891–912, 2014. DOI: https://doi.org/10.1002/etep.1750.
- A. J. M. Cardoso, S. M. A. Cruz, and D. S. B. Fonseca, “Inter-turn stator winding fault diagnosis in three-phase induction motors by Park’s vector approach,” IEEE Trans. Energy Convers., vol. 14, no. 3, pp. 595–598, 1999. DOI: https://doi.org/10.1109/60.790920.
- B.-G. Gu, “Offline interturn fault diagnosis method for induction motors by impedance analysis,” IEEE Trans. Ind. Electron., vol. 65, no. 7, pp. 5913–5920, Dec. 2018. DOI: https://doi.org/10.1109/TIE.2017.2782200.
- B. Mirafzal, R. J. Povinelli, and N. A. O. Demerdash, “Interturn fault diagnosis in induction motors using the pendulous oscillation phenomenon,” IEEE Trans. Energy Convers., vol. 21, no. 4, pp. 871–882, Nov. 2006. DOI: https://doi.org/10.1109/TEC.2005.853767.
- J. M. Apsley and S. Williamson, “Analysis of multi-phase induction machines with winding faults,” Proceeding of IEEE International Electric Machines and Drives Conference IEMDC, San Antonio, TX, USA, 2005, pp. 249–255.
- S. D. Choi, B. Akin, M. M. Rahimian, H. A. Toliyat, and M. Azadpour, “A generalized condition monitoring method for multi-phase induction motors,” Proceeding of IEMDC 2009, Miami, FL, USA, May 2009.
- L. Zarri et al., “Behaviour of multiphase induction machines with unbalanced stator windings,” Proceeding of DEMPED, Bologna, Italy, Sep. 2011.
- M. M. Ismail, “Predictive maintenance based on earlier fault detection of multi-phase induction machines using neural network artificial intelligence techniques,” J. Eng. Sci., vol. 41, no. 4, pp. 1612–1636, Jul. 2013. DOI: https://doi.org/10.21608/jesaun.2013.114886.
- Y. Zhao and T. A. Lipo, “Space vector PWM control of dual three-phase induction machine using vector space decomposition,” IEEE Trans. Ind. Appl., vol. 31, no. 5, pp. 1100–1109, 1995. DOI: https://doi.org/10.1109/28.464525.
- E. Levi, M. Jones, and S. N. Vukosavic, “A series-connected two-motor six-phase drive with induction and permanent magnet machines,” IEEE Trans. Energy Convers., vol. 21, no. 1, pp. 121–129, Mar. 2006. DOI: https://doi.org/10.1109/TEC.2005.853737.
- M. J. Duran et al., “A simple braking method for six-phase induction motor drives with unidirectional power flow in the base-speed region,” IEEE Trans. Ind. Electron., vol. 64, no. 8, pp. 6032–6041, Aug. 2017. DOI: https://doi.org/10.1109/TIE.2017.2682006.
- H. S. Che, E. Levi, M. Jones, W. P. Hew, and N. A. Rahim, “Current control methods for an asymmetrical six-phase induction motor drive,” IEEE Trans. Power Electron., vol. 29, no. 1, pp. 407–417, Jan. 2014. DOI: https://doi.org/10.1109/TPEL.2013.2248170.
- M. H. Holakooie, M. Ojaghi, and A. Taheri, “Direct torque control of six-phase induction motor with a novel MRAS-based stator resistance estimator,” IEEE Trans. Ind. Electron., vol. 65, no. 10, pp. 7685–7696, Oct. 2018. DOI: https://doi.org/10.1109/TIE.2018.2807410.
- J. M. Apsley, “Derating of multiphase induction machines due to supply imbalance,” IEEE Trans. Ind. Appl., vol. 46, no. 2, pp. 798–805, Mar./Apr. 2010. DOI: https://doi.org/10.1109/TIA.2010.2040056.