References
- J. D. Jenkins et al., “The benefits of nuclear flexibility in power system operations with renewable energy,” Appl. energy, vol. 222, pp. 872–884, 2018. DOI: https://doi.org/10.1016/j.apenergy.2018.03.002.
- J. S. Hsu, “Monitoring of defects in induction motors through air-gap torque observation,” IEEE Trans. Ind. Applicat, vol. 31, no. 5, pp. 1016–1021, Sept./Oct. 1995. DOI: https://doi.org/10.1109/28.464514.
- S. M. A. Cruz and A. J. M. Cardoso, “Stator winding fault diagnosis in three-phase synchronous and asynchronous motors, by the extended Park's vector approach,” IEEE Trans. Ind. Appl., vol. 37, no. 5, pp. 1227–1233, 2001. DOI: https://doi.org/10.1109/28.952496.
- L. Zhong et al., “Analysis of direct torque control in permanent magnet synchronous motor drives,” IEEE Trans. Power Electron, vol. 12, no. 3, pp. 528–536, 1997. DOI: https://doi.org/10.1109/28.952496.
- G. F. Zhai, Q. Y. Wang, and H. M. Liang, “Permanent-magnet equivalent model of calculating relay’s static attractive torque characteristics by finite element method,” IEEE Trans. Magn., vol. 48, no. 9, pp. 2467–2471, 2012. DOI: https://doi.org/10.1109/63.575680.
- P. Handgruber, A. Stermecki, O. Biro, A. Belahcen, and E. Dlala, “Three-dimensional eddy-current analysis in steel laminations of electrical machines as a contribution for improved iron loss modeling,” IEEE Trans. Ind. Appl., vol. 49, no. 5, pp. 2044–2052, Sep.-Oct. 2013. DOI: https://doi.org/10.1109/TIA.2013.2260713.
- P. Asef, R. B. Perpina, M. R. Barzegaran, A. Lapthorn, and D. Mewes, “Load identification of different Halbach-array topologies on permanent magnet synchronous generators using the coupled field-circuit FE methodology,” Electric Power Syst. Res., vol. 154, pp. 484–492, Jan. 2018. DOI: https://doi.org/10.1016/j.epsr.2017.08.041.
- B. Ge, P. Lv, D. Tao, F. Xiao, and H. Zhao, “Research on magnetic field state analysis of non-salient pole synchronous generator,” Turk. J. Elec. Eng. Comp. Sci., vol. 25, pp. 1680–1692, 2017. DOI: https://doi.org/10.3906/elk-1509-72.
- L. Pin, X. Zidian, Z. Hongsen, and G. Baojun, “Effects of damper winding, eddy current, and leakage flux on magnetic field distortion and stator electrical quantity research of nuclear power turbo‐generator under external asymmetry,” IEEJ Trans. Elec. Electron. Eng., vol. 14, no. 6, pp. 836–843, 2019. DOI: https://doi.org/10.1002/tee.22872.
- P. Lv, B. Ge, and P. Lin, “Comparison of electrical quantity characteristics with or without neural point on load side of 1400 MVA nuclear power turbo-generator,” Electric Power Compon. Syst., vol. 47, no. 1–2, pp. 141–152, 2019. DOI: https://doi.org/10.1080/15325008.2019.1576243.
- J. H. Chen, F. G. Zhang, and W. Zhang, “No-load torque ripple analysis of a novel permanent magnet synchronous motor with anti-rotation dual rotors using finite element method,” in 2011 International Conference on Electrical Machines and Systems, Beijing, China, pp. 1–6, Aug. 2011. DOI: https://doi.org/10.1109/ICEMS.2011.6073528.
- G. Mehmet, Y. Ersin, and D. Yucel, “Modeling based on 3D finite element analysis and experimental study of a 24-slot 8-pole axial-flux permanent-magnet synchronous motor for no cogging torque and sinusoidal back-EMF,” Turkish J. Elect. Eng. Comput. Sci., vol. 24, no. 1, pp. 262–275, 2016. DOI: https://doi.org/10.3906/elk-1308-150.
- H. Katsuhiro, H. Hiroyuki, and T. Tomoshi, “Impact torque analysis of new electromagnetic impact mechanism employing 3-D finite element method,” IEEE Trans. Magn., vol. 47, no.5, pp. 262–275, May 2011. DOI: https://doi.org/10.1109/TMAG.2010.2099211.
- Y. L. He, F. L. Wang, and G. J. Tang, “Effect of stator inter-turn short circuit position on electromagnetic torque of generator with consideration of air-gap eccentricity,” Trans. China Electrotechn. Soc., vol. 32, no. 7, pp. 11–19, Apr. 2017. DOI: https://doi.org/10.1109/TMAG.2010.2099211.
- Y. C. Liang and Y. L. Yang, “Performance analysis of 10-MW HTS wind generator based on 2D transient FEA,” IEEE Power Energy Technol. Syst. J., vol. 4, no. 1, pp. 10–15, Mar. 2017. DOI: https://doi.org/10.1109/JPETS.2016.2626385.
- W. Z. Fei and P. C. K. Patrick, “Torque ripple reduction of a direct-drive permanent-magnet synchronous machine by material-efficient axial pole pairing,” IEEE Trans. Ind. Electron., vol. 59, no. 6, pp. 2601–2611, Jun. 2012. DOI: https://doi.org/10.1109/TIE.2011.2158048..
- Y. Zhou, H. S. Li, and G. W. Meng, “Analytical calculation of magnetic field and cogging torque in surface-mounted permanent-magnet machines accounting for any eccentric rotor shape,” IEEE Trans. Ind. Electron., vol. 62, no. 6, pp. 3438–3447, Jun. 2015. DOI: https://doi.org/10.1109/TIE.2014.2369458.
- K.-H. Shin, H.-I. Park, H.-W. Cho, and J.-Y. Choi, “Analytical calculation and experimental verification of cogging torque and optimal point in permanent magnet synchronous motors,” IEEE Trans. Magn., vol. 53, no. 6, pp. 1–4, Jun. 2017. DOI: https://doi.org/10.1109/TMAG.2017.2667643.
- K. Ide et al., “Analysis of saturated synchronous reactances of large turbine generator by considering cross-magnetizing reactances using finite elements,” IEEE Trans. Energy Convers., vol. 14, no. 1, pp. 66–71, 1999. DOI: https://doi.org/10.1109/60.749149.
- E. C. Barnes, “An experimental study of induction machine end-turn leakage reactance,” Trans. Am. Inst. Electr. Eng., vol. 70, no. 1, pp. 671–679, 1951. DOI: https://doi.org/10.1109/T-AIEE.1951.5060461.
- T. S. Low, C. Bi, and Z. J. Liu, “A hybrid technique for electromagnetic torque and force analysis of electric machines,” COMPEL, vol. 16, no. 3, pp. 191–205, 1997. DOI: 0.1108/03321649710182968. DOI: https://doi.org/10.1108/03321649710182968.
- H. Q. Zhang, X. S. Wang, P. F. Wei, and D. G. Xu, “Study on direct torque control algorithm based on space vector modulation,” Electric Mach. Control, vol. 16, no. 6, pp. 13–18, Jun. 2012.
- V. C. Strezoski, “Advanced symmetrical components method,” IET Generation Transmission Distrib., vol. 5, no. 8, pp. 833–841, Aug. 2011. DOI: https://doi.org/10.1049/iet-gtd.2010.0370.
- N. C. Zhou, A. Q. Luo, and Q. G. Wang, “Symmetrical components method for short-circuit current calculation of induction generators in distribution network,” Automat. Electric Power Syst., vol. 37, no. 11, pp. 65–70, Jun. 2013. DOI: https://doi.org/10.7500/AEPS201208265.
- P. Thakur and A. K. Singh, “Modified symmetrical component method for characterization of unbalanced voltage sags,” Int. Trans. Elect. Energy Syst., vol. 26, no. 8, pp. 1725–1736, Aug. 2016. DOI: https://doi.org/10.1002/etep.2174..
- B. J. Ge, P. Lv, and F. Xiao, “An electromagnetic torque calculation method based on network parameters for non salient pole generator,” J. Comput. Theoret. Nanosci., vol. 12, no. 12, pp. 5895–5901, 2015. DOI: https://doi.org/10.1166/jctn.2015.4733..
- D. Uzel, Z. Peroutka, and V. Smidl, “Self-sensing control of wound rotor synchronous motor drive for mine hoist,” IEEE Trans. Ind. Electron., vol. 65, no. 3, pp. 2009–2017, Aug. 2017. DOI: https://doi.org/10.1109/TIE.2017.2740818.
- Z. B. Zhang, H. Fang, and F. Gao, “Multiple-vector model predictive power control for grid-tied wind turbine system with enhanced steady-state control performance,” IEEE Trans. Ind. Electron. Electric Mach. Control, vol. 64, no. 8, pp. 6287–6298, Aug. 2017. DOI: https://doi.org/10.1109/TIE.2017.2682000.
- P. Lv, B. J. Ge, and D. J. Tao, “A novel method for electromagnetic torque calculation applying positive and negative sequence current vectors,” Int. J. Appl. Electromagn. Mech., vol. 51, no. 4, pp. 391–403, 2016. DOI: https://doi.org/10.3233/JAE-150151.