References
- F. Blaabjerg, R. Teodorescu, and M. Liserre, “Power converters and control of renewable energy systems,” in, Proc. International Conference for Physical Educators (ICPE 2004), Hong Kong, pp. 2–20, Oct. 2004.
- F. Blaabjerg, Z. Chen, and S. B. Kjaer, “Power electronics as efficient interface in dispersed power generation systems,” IEEE Trans. Power Electron., vol. 19, no. 5, pp. 1184–1194, Sep. 2004. DOI: https://doi.org/10.1109/TPEL.2004.833453.
- M. Taghvaee, M. Radzi, S. Moosavain, H. Hizam, and M. H. Marhaban, “A current and future study on non-isolated DC–DC converters for photovoltaic applications,” Renew. Sustain. Energy Rev., vol. 17, pp. 216–227, Jun. 2013. DOI: https://doi.org/10.1016/j.rser.2012.09.023.
- T. V. Jensen and P. Pinson, “RE-Europe, a large- scale dataset for modeling a highly renewable European electricity system,” Sci. Data, vol. 4, pp. 170175, 2017.
- A. Tahri, et al., “Management of fuel cell power and supercapacitor state-of-charge for electric vehicles,” Int. J Electric Power Syst. Res., vol. 160, pp. 89–98, Jul. 2018. DOI: https://doi.org/10.1016/j.epsr.2018.02.003.
- R. Reshma Gopi and S. Sreejith, “Converter topologies in photovoltaic applications – A review,” Int. J. Renew. Sustain. Energy Rev., vol. 94, pp. 1–14, Oct. 2018. DOI: https://doi.org/10.1016/j.rser.2018.05.047.
- H. Liu, H. Hu, H. Wu, Y. Xing, and I. Batarseh, “Overview of high-step-up coupled-inductor boost converters,” IEEE J. Emerg. Sel. Topics Power Electron., vol. 4, no. 2, pp. 689–704, Jun. 2016. DOI: https://doi.org/10.1109/JESTPE.2016.2532930.
- S. Saravanan and N. R. Babu, “Design and development of single switch high step-up DC-DC converter,” IEEE J. Emerg. Sel. Topics Power Electron., vol. 6, no. 2, pp. 855–863, Jun. 2018. DOI: https://doi.org/10.1109/JESTPE.2017.2739819.
- M. Adly and K. Strunz, “Irradiance-adaptive PV module integrated converter for high efficiency and power quality in standalone and DC microgrid applications,” IEEE Trans. Ind. Electron., vol. 65, no. 1, pp. 436–446, Jan. 2018. DOI: https://doi.org/10.1109/TIE.2017.2723860.
- R. W. Erickson, Fundamentals of Power Electronics, 2nd ed. Norwell, MA: Kluwer, 2001.
- F. Mumtaz, et al., “Review on non-isolated DC-DC converters and their control techniques for renewable energy applications,” Ain Shams Eng. J., vol. 12, no. 4, pp. 3747–3763, 2021. Available online 14 May DOI: https://doi.org/10.1016/j.asej.2021.03.022.
- J. C. Rosas-Caro, et al., “DC–DC multiplier boost converter with resonant switching,” Elect. Power Syst. Res., vol. 119, pp. 83–90, Feb. 2015. DOI: https://doi.org/10.1016/j.epsr.2014.09.003.
- J. C. Rosas-Caro, et al., “A DC–DC multilevel boost converter,” IET Power Electr., vol. 3, no. 1, pp. 129–137, 2010. DOI: https://doi.org/10.1049/iet-pel.2008.0253.
- S. Iqbal, “A hybrid symmetrical voltage multiplier,” IEEE Trans. Power Electron., vol. 29, no. 1, pp. 6–12, 2014. DOI: https://doi.org/10.1109/TPEL.2013.2251474.
- M. Prudente, L. L. Pfitscher, G. Emmendoerfer, E. F. Romaneli and R. Gules, “Voltage multiplier cells applied to non-isolated DC–DC converters,” IEEE Trans. Power Electron., vol. 23, no. 2, pp. 871–887, Mar. 2008. DOI: https://doi.org/10.1109/TPEL.2007.915762.
- H. Ardi and A. Ajami, “Study on a high voltage gain SEPIC-based DC-DC converter with continuous input current for sustainable energy applications,” IEEE Trans. Power Electron., vol. 33, no. 12, pp. 10403–10409, Dec. 2018. DOI: https://doi.org/10.1109/TPEL.2018.2811123.
- S. A. Gorji, A. Mostaan, H. T. My and M. Ektesabi, “Non-isolated buck–boost DC–DC converter with quadratic voltage gain ratio,” IET Power Electron., vol. 12, no. 6, pp. 1425–1433, 2019. DOI: https://doi.org/10.1049/iet-pel.2018.5703.
- J. Li and J. Liu, “A novel buck-boost converter with low electric stress on components,” IEEE Trans. Ind. Electron., vol. 66, no. 4, pp. 2703–2713, 2019. DOI: https://doi.org/10.1109/TIE.2018.2847646.
- K. I. Hwu and T. J. Peng, “A novel buck–boost converter combining KY and buck converters,” IEEE Trans. Power Electron., vol. 27, no. 5, pp. 2236–2241, May 2012. DOI: https://doi.org/10.1109/TPEL.2011.2182208.
- M. R. Banaei and S. G. Sani, “Analysis and implementation of a new SEPIC-based single-switch buck-boost DC-DC converter with continuous input current,” IEEE Trans. Power Electron., vol. 33, no. 12, pp. 10317–10325, Dec. 2018. DOI: https://doi.org/10.1109/TPEL.2018.2799876.
- M. R. Banaei and H. A. F. Bonab, “A novel structure for single-switch nonisolated transformerless buck-boost DC-DC converter,” IEEE Trans. Ind. Electron, vol. 64, no. 1, pp. 198–205, 2017. DOI: https://doi.org/10.1109/TIE.2016.2608321.
- M. R. Banaei and H. A. F. Bonab, “A high efficiency nonisolated buck-boost converter based on ZETA converter,” IEEE Trans. Ind. Electron., vol. 67, no. 3, pp. 1991–1998, 2020. DOI: https://doi.org/10.1109/TIE.2019.2902785.
- N. Zhang, G. Zhang, K. W. See, and B. Zhang, “A single-switch quadratic buck-boost converter with continuous input port current,” IEEE Trans. Power Electron., vol. 33, no. 5, pp. 4157–4166, Jun. 2018. DOI: https://doi.org/10.1109/TPEL.2017.2717462.
- S. Miao, F. Wang and X. Ma, “A new transformerless buck-boost converter with positive output voltage,” IEEE Trans. Ind. Electron., vol. 63, no. 5, pp. 2965–2975, May 2016. DOI: https://doi.org/10.1109/TIE.2016.2518118.
- N. A. Sarikhani, B. Allahverdinejad, M. Hamzeh and E. Afjei, “A continuous input and output current quadratic buck-boost converter with positive output voltage for photovoltaic applications,” Solar Energy, vol. 188, pp. 19–27, Aug. 2019. DOI: https://doi.org/10.1016/j.solener.2019.05.025.
- J. C. Rosas-Caro, V. M. Sanchez, J. E. Valdez-Resendiz, J. C. Mayo-Maldonado, F. Beltran-Carbajal and A. Valderrabano-Gonzalez, “Quadratic buck-boost converter with positive output voltage and continuous input current for PEMFC systems,” Int. J. Hydrogen Energy, vol. 42, no. 51, pp. 30 400–30 406, Dec. 2017.
- J. C. Rosas-Caro, J. E. Valdez-Resendiz, J. C. Mayo-Maldonado, A. Alejo-Reyes and A. Valderrabano-Gonzalez, “Quadratic buck-boost converter with positive output voltage and minimum ripple point design,” IET Power Electron., vol. 11, no. 7, pp. 1306–1313, Jun. 2018.
- M. A. Abbaszadeh, M. Monfared and H. Heydari-Doostabad, “High-buck in buck and high-boost in boost dual-mode inverter (Hb2DMI),” IEEE Trans. Ind. Electron., vol. 68, no. 6, pp. 1–1, Jun. 2021.
- N. M. Shen, A. Joseph, J. Wang, F. Z. Peng and D. J. Adams, “Comparison of traditional inverters and Z-source inverter for fuel cell vehicles,” IEEE Trans. Power Electron., vol. 22, no. 4, pp. 1453–1463, Jul. 2007. DOI: https://doi.org/10.1109/TPEL.2007.900505.