75
Views
0
CrossRef citations to date
0
Altmetric
Research Articles

Fault-Tolerant Modular Switched-Capacitor DC-DC Converter (MSCC) for Fuel Cells

ORCID Icon, , & ORCID Icon
Pages 212-223 | Received 16 Apr 2019, Accepted 23 Jun 2020, Published online: 08 Feb 2023

References

  • E. Hossain, R. Perez, A. Nasiri, and S. Padmanaban, “A comprehensive review on constant power loads compensation techniques,” IEEE Access., vol. 6, pp. 33285–33305, 2018. DOI: 10.1109/ACCESS.2018.2849065.
  • N. Priyadarshi, S. Padmanaban, P. K. Maroti, and A. Sharma, “An extensive practical investigation of FPSO-based MPPT for grid integrated PV system under variable operating conditions with anti-islanding protection,” IEEE Syst. J., vol. 13, no. 2, pp. 1861–1871, 2019.
  • C. Dincan, P. Kjaer, Y. Chen, S. Munk-Nielsen, and C. L. Bak, “Analysis of a high-power, resonant DC–DC converter for DC wind turbines,” IEEE Trans. Power Electron., vol. 33, no. 9, pp. 7438–7454, 2018. DOI: 10.1109/TPEL.2017.2770322.
  • C. C. Chan, “The state of the art of electric, hybrid, and fuel cell vehicles,” Proc. IEEE., vol. 95, no. 4, pp. 704–718, 2007. DOI: 10.1109/JPROC.2007.892489.
  • L. Schmitz, D. C. Martins, and R. F. Coelho, “High step-up non-isolated ZVS/ZCS DC-DC converter for photovoltaic thin-film module applications,” IEEE J. Emerg. Sel. Topics Power Electron., vol. 7, no. 1, pp. 565–575, 2019. DOI: 10.1109/JESTPE.2018.2830650.
  • A. Khaligh and Z. Li, “Battery, ultracapacitor, fuel cell, and hybrid energy storage systems for electric, hybrid electric, fuel cell, and plug-in hybrid electric vehicles: state of the art,” IEEE Trans. Veh. Technol., vol. 59, no. 6, pp. 2806–2814, 2010. DOI: 10.1109/TVT.2010.2047877.
  • A. Emadi, Y. J. Lee, and K. Rajashekara, “Power electronics and motor drives in electric, hybrid electric, and plug-in hybrid electric vehicles,” IEEE Trans. Ind. Electron., vol. 55, no. 6, pp. 2237–2245, 2008. DOI: 10.1109/TIE.2008.922768.
  • O. C. Mak, Y. C. Wong, and A. Ioinovici, “Step-up DC power supply based on a switched-capacitor circuit,” IEEE Trans. Ind. Electron., vol. 42, no. 1, pp. 90–97, 1995. DOI: 10.1109/41.345851.
  • A. Andrade, L. Schuch, and M. Martins, “Analysis and design of high-efficiency hybrid high step-up DC-DC converter for distributed PV generation systems,” IEEE Trans. Ind. Electron., vol. 66, no. 5, pp. 3860–3868, 2019. DOI: 10.1109/TIE.2018.2840496.
  • G. Spiazzi, D. Biadene, S. Marconi, and A. Bevilacqua, “Non-isolated high step-up DC-DC converter with minimum switch voltage stress,” 2017 IEEE Southern Power Electronics Conference (SPEC). pp. 1–6, 4–7 Dec. 2017, Puerto Varas, Chile. DOI: 10.1109/SPEC.2017.8333551.
  • S. Hasanpour, A. Baghramian, and H. Mojallali, “A modified SEPIC-based high step-up DC-DC converter with quasi-resonant operation for renewable energy applications,” IEEE Trans. Ind. Electron., vol. 66, no. 5, pp. 3539–3549, 2019. DOI: 10.1109/TIE.2018.2851952.
  • A. Kumar and P. Sensarma, “Ripple-free input current high voltage gain dc-dc converters with coupled inductors,” IEEE Trans. Power Electron, vol. 34, no. 4, pp. 3418–3428, 2019.
  • R. Faraji and H. Farzanehfard, “Soft-switched non-isolated high step-up three-port DC-DC converter for hybrid energy systems,” IEEE Trans. Power Electron., vol. 33, no. 12, pp. 10101–10111, 2018.
  • S. W. Lee and H. L. Do, “Quadratic boost DC-DC converter with high voltage gain and reduced voltage stresses,” IEEE Trans. Power Electron., vol. 34, no. 3, pp. 2397–2404, 2019.
  • A. Rajaei, R. Khazan, M. Mahmoodian, M. Mardaneh, and M. Gitizadeh, “A dual inductor high step-up DC/DC converter based on the Cockcroft-Walton multiplier,” IEEE Trans. Power Electron., vol. 33, no. 11, pp. 9699–9709, 2018. DOI: 10.1109/TPEL.2018.2792004.
  • M. Forouzesh, Y. P. Siwakoti, S. A. Gorji, F. Blaabjerg, and B. Lehman, “Step-up DC-DC converters: A comprehensive review of voltage-boosting techniques, topologies, and applications,” IEEE Trans. Power Electron., vol. 32, no. 12, pp. 9143–9178, 2017. DOI: 10.1109/TPEL.2017.2652318.
  • Y. Tang, T. Wang, and D. Fu, “Multicell switched-inductor/switched-capacitor combined active-network converters,” IEEE Trans. Power Electron., vol. 30, no. 4, pp. 2063–2072, 2015. DOI: 10.1109/TPEL.2014.2325052.
  • Y. Jiao, F. L. Luo, and M. Zhu, “Voltage-lift-type switched-inductor cells for enhancing DC-DC boost ability: principles and integrations in Luo converter,” IET Pwr. Electr., vol. 4, no. 1, pp. 131–142, 2011. DOI: 10.1049/iet-pel.2010.0021.
  • Y. Zhang, Y. Gao, L. Zhou, and M. Sumner, “A switched-capacitor bidirectional DC-DC converter with wide voltage gain range for electric vehicles with hybrid energy sources,” IEEE Trans. Power Electron., vol. 33, no. 11, pp. 9459–9469, 2018. DOI: 10.1109/TPEL.2017.2788436.
  • Z. Waradzyn, R. Stala, A. Mondzik, A. Penczek, A. Skala, and S. Pirog, “Efficiency analysis of MOSFET-based air-choke resonant DC–DC step-up switched-capacitor voltage multipliers,” IEEE Trans. Ind. Electron., vol. 64, no. 11, pp. 8728–8738, 2017. DOI: 10.1109/TIE.2017.2698368.
  • Y. P. Siwakoti and F. Blaabjerg, “Single switch nonisolated ultra-step-up DC-DC converter with an integrated coupled inductor for high boost applications,” IEEE Trans. Power Electron., vol. 32, no. 11, pp. 8544–8558, 2017. DOI: 10.1109/TPEL.2016.2646382.
  • X. Zhu, B. Zhang, Z. Li, H. Li, and L. Ran, “Extended switched-boost DC-DC converters adopting switched-capacitor/switched-inductor cells for high step-up conversion,” IEEE J. Emerg. Sel. Topics Power Electron., vol. 5, no. 3, pp. 1020–1030, 2017. DOI: 10.1109/JESTPE.2016.2641928.
  • F. Ueno, T. Inoue, I. Oota, and I. Harada, “Emergency power supply for small computer systems,” IEEE International Symposium on Circuits and Systems, vol. 2, pp. 1065–1068, 1991.
  • E. H. Ismail, M. A. Al-Saffar, A. J. Sabzali, and A. A. Fardoun, “A family of single-switch PWM converters with high step-up conversion ratio,” IEEE Trans. Circuits Syst. I., vol. 55, no. 4, pp. 1159–1171, 2008. DOI: 10.1109/TCSI.2008.916427.
  • Y. Ye, K. W. E. Cheng, and S. Chen, “A high step-up PWM DC-DC converter with coupled-inductor and resonant switched-capacitor,” IEEE Trans. Power Electron., vol. 32, no. 10, pp. 7739–7749, 2017. DOI: 10.1109/TPEL.2016.2633381.
  • W. Li, C. Xu, H. Yu, Y. Gu, and X. He, “Analysis, design and implementation of isolated bidirectional converter with winding-cross-coupled inductors for high step-up and high step-down conversion system,” IET Power Electron., vol. 7, no. 1, pp. 67–77, 2014. DOI: 10.1049/iet-pel.2013.0072.
  • W. Li, L. Fan, Y. Zhao, X. He, D. Xu, and B. Wu, “High-step-up and high-efficiency fuel-cell power-generation system with active-clamp flyback-forward converter,” IEEE Trans. Ind. Electron., vol. 59, no. 1, pp. 599–610, 2012.
  • W. Li and X. He, “Review of nonisolated high-step-up DC/DC converters in photovoltaic grid-connected applications,” IEEE Trans. Ind. Electron., vol. 58, no. 4, pp. 1239–1250, 2011. DOI: 10.1109/TIE.2010.2049715.
  • Z. Gao, C. Cecati, and S. X. Ding, “A survey of fault diagnosis and fault-tolerant techniques part I: fault diagnosis with model-based and signal-based approaches,” IEEE Trans. Ind. Electron., vol. 62, no. 6, pp. 3757–3767, 2015. DOI: 10.1109/TIE.2015.2417501.
  • Z. Gao, C. Cecati, and S. X. Ding, “A survey of fault diagnosis and fault-tolerant techniques part II: fault diagnosis with knowledge-based and hybrid/active approaches,” IEEE Trans. Ind. Electron., vol. 62, no. 6, pp. 3768–3774, 2015. DOI: 10.1109/TIE.2015.2417501.
  • R. W. Erickson and D. Maksimović, Fundamentals of Power Electronics. Boston, MA: Springer, 2001.
  • Z. Z. He, “High step up DC-DC converter topology for PV systems and electric vehicles,” Ph.D. thesis, Aston University, 2018.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.