Implementation of Different 2D Finite Element Modeling Approaches in Axial Flux Induction Motors

References

• M. Gulec and M. Aydin, “Implementation of different 2D finite element modelling approaches in axial flux permanent magnet disc machines,” IET Electr. Power Appl., vol. 12, no. 2, pp. 195–202, 2018. DOI: 10.1049/iet-epa.2017.0434.
   Web of Science ®Google Scholar
• B. Zhang, T. Seidler, R. Dierken and M. Doppelbauer, “Development of a yokeless and segmented armature axial flux machine,” IEEE Trans. Ind. Electron., vol. 63, no. 4, pp. 1–1, 2015. DOI: 10.1109/TIE.2015.2500194.
   Web of Science ®Google Scholar
• G. R. Bruzinga, A. J. S. Filho and A. Pelizari, “Analysis and design of 3 kW axial flux permanent magnet synchronous motor for electric car,” IEEE Latin Am. Trans., vol. 20, no. 5, pp. 855–863, 2022. DOI: 10.1109/TLA.2022.9693571.
   Web of Science ®Google Scholar
• N. Güler, E. Irmak, H. Gör and E. Kurt, “An inverter design for a new permanent magnet synchronous generator,” Int. J. Hydr. Energy, vol. 42, no. 28, pp. 17723–17732, Jul. 2017. DOI: 10.1016/j.ijhydene.2017.01.223.
   Web of Science ®Google Scholar
• B. DIanati, S. Kahourzade and A. Mahmoudi, “Analytical design of axial-flux induction motors,” presented at 2019 IEEE Vehicle Power and Propulsion Conference (VPPC), Hanoi, Vietnam, Oct. 2019, pp. 1–6. DOI: 10.1109/VPPC46532.2019.8952172.
   Google Scholar
• J. Pyrhönen, T. Jokinen and V. Hrabovcová, Design of Rotating Electrical Machines. Chichester, West Sussex, United Kingdom: John Wiley & Sons, 2008.
   Google Scholar
• F. C. Mushid and D. G. Dorrell, “Review of axial flux induction motor for automotive applications,” presented at 2017 IEEE Workshop on Electrical Machines Design, Control and Diagnosis (WEMDCD), Nottingham, UK, Jun. 2017, pp. 146–151. DOI: 10.1109/WEMDCD.2017.7947738.
   Google Scholar
• B. DIanati, S. Kahourzade and A. Mahmoudi, “Optimization of axial-flux ınduction motors for the application of electric vehicles considering driving cycles,” IEEE Trans. Energy Convers., vol. 35, no. 3, pp. 1522–1533, Sep. 2020. DOI: 10.1109/TEC.2020.2976625.
   Web of Science ®Google Scholar
• Erdal IRMAK, “A Real Time Application for Analysing Impacts of Frequency Variation on Induction Motor Parameters,” Elect. Rev., vol. 1, no. b, pp. 290–293, 2012.
   Google Scholar
• B. DIanati, S. Kahourzade and A. Mahmoudi, “Axial-flux induction motors for electric vehicles,” presented at 2019 IEEE Vehicle Power and Propulsion Conference (VPPC), Hanoi, Vietnam, Oct. 2019, pp. 1–6. DOI: 10.1109/VPPC46532.2019.8952278.
   Google Scholar
• C. Hong, W. Huang and Z. Hu, “Design and analysis of a high-speed dual stator slotted solid-rotor axial-flux induction motor,” IEEE Trans. Transp. Electrific., vol. 5, no. 1, pp. 71–79, Mar. 2019. DOI: 10.1109/TTE.2018.2880301.
   Web of Science ®Google Scholar
• Z. Nasiri-Gheidari and H. Lesani, “Theoretical modeling of axial flux squirrel cage induction motor considering both saturation and anisotropy,” Int. Trans. Electr. Energ. Syst., vol. 24, no. 3, pp. 335–346, Mar. 2014. DOI: 10.1002/etep.1691.
   Web of Science ®Google Scholar
• S. Kahourzade, A. Mahmoudi, E. Roshandel and Z. Cao, “Optimal design of axial-flux ınduction motors based on an improved analytical model,” Energy, vol. 237, pp. 121552, Dec. 2021. DOI: 10.1016/j.energy.2021.121552.
   Web of Science ®Google Scholar
• T. Wolnik, “Alternate computational method for induction disk motor based on 2D FEM model of cylindrical motor,” Archives Elect. Eng., vol. 69, no. nr 1, pp. 233–244, 2023. DOI: 10.24425/aee.2020.131770.
   Google Scholar
• A. Nobahari, A. Darabi and A. Hassannia, “Axial flux induction motor, design and evaluation of steady state modeling using equivalent circuit,” presented at 8th Power Electronics, Drive Systems and Technologies Conference (PEDSTC), Mashhad, Iran, Feb. 2017, pp. 353–358. DOI: 10.1109/PEDSTC.2017.7910351.
   Google Scholar
• H. Serhat Gerçekcioğlu and M. Akar, “Efficiency and performance comparison between synchronous reluctance and induction motor in axial flux concept,” Gazi Univ. J. Sci. Part C: Des. Technol., vol. 9, no.2, pp. 297–316, 2021. DOI: 10.29109/gujsc.910521.
   Google Scholar
• J. Gieras, R. Wang and M. Kamper, Axial Flux Permanent Magnet Brushless Machines. New York, USA: Springer Science & Business Media, 2008.
   Google Scholar
• B. P. B. Arthur and U. Baskaran, “Improved air-gap flux in axial flux induction machine through shaping of radial slot opening,” Sadhana Acad. Proc. Eng. Sci., vol. 45, no. 1, pp. 1–12, Dec. 2020. DOI: 10.1007/S12046-020-01337-X/FIGURES/25.
   Web of Science ®Google Scholar
• B. P. B. Arthur and U. Bhaskaran, “Accurate Determination of Magnetic Flux in Axial Flux Induction Machine Using Multi-slice Approach and Basic Design Equations,” J. Institution Engineers Series B, vol. 100, no. 1, pp. 41–51, 2019. DOI: 10.1007/S40031-018-0358-0/FIGURES/13.
   Google Scholar
• J. Mei, Y. Zuo, C. H. T. Lee and J. L. Kirtley, “Modeling and optimizing method for axial flux ınduction motor of electric vehicles,” IEEE Trans. Veh. Technol., vol. 69, no. 11, pp. 12822–12831, Nov. 2020. DOI: 10.1109/TVT.2020.3030280.
   Web of Science ®Google Scholar
• R. Krishnan, Electric Motor Drives : Modeling, Analysis, and Control. New Jersey, USA: Prentice Hall, 2001.
   Google Scholar
• Z. Cao, A. Mahmoudi, S. Kahourzade and W. L. Soong, “An overview of axial-flux ınduction machine,” presented at 2021 31st Australasian Universities Power Engineering Conference (AUPEC), Perth, Australia, 2021, pp. 1–6. DOI: 10.1109/AUPEC52110.2021.9597784.
   Google Scholar
• M. Akar, M. Eker, M. Özsoy and H. S. Gerçekçioğlu, “Efficiency analysis of axial flux SynRM in variable speed applications,” Machines, vol. 10, no. 10, pp. 838–10, Sep. 2022. DOI: 10.3390/machines10100838.
   Web of Science ®Google Scholar
• N. Riviere, M. Villani and M. Popescu, “Optimisation of a high speed copper rotor ınduction motor for a traction application,” presented at IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society (IECON), Lisbon, Portugal, Oct. 2019, pp. 2720–2725. DOI: 10.1109/IECON.2019.8927627.
   Google Scholar