References
- M. NAKAMURA et al., “Key Aspects of the Safety Study of a Water-Cooled Fusion DEMO Reactor,” Plasma Fusion Res., 9, 1405139 (2014); http://dx.doi.org/10.1585/pfr.9.1405139.
- H. NAKAMURA et al., “Case Study on Tritium Inventory in the Fusion DEMO Plant at JAERI,” Fusion Eng. Des., 81, 1339 (2006); http://dx.doi.org/10.1016/j.fusengdes.2005.10.009.
- M. NISHIKAWA, “Tritium Breeding Ratio Required to Keep Tritium Balance in a D-T Fusion Reactor,” Fusion Sci. Technol., 60, 1071 (2011); http://dx.doi.org/10.13182/11-A12601.
- Y. UEDA, “Status of Plasma Facing Material Studies and Issues toward DEMO,” Proc. 18th International Toki Conference, Toki-city, Gifu, Japan, December 9–12, 2008.
- M. NISHIKAWA et al., “Chemical Form of Tritium Released from Solid Breeder Materials,” J. Nucl. Mater., 325, 87 (2004); http://dx.doi.org/10.1016/j.jnucmat.2003.11.001.
- B. L. DOYLE, “A Simple Theory for Maximum H Inventory and Release: A New Transport Parameter,” J. Nucl. Mater., 111&112, 628 (1982); http://dx.doi.org/10.1016/0022-3115(82)90277-X.
- B. L. DOYLE and D. K. BRICE, “Steady State Hydrogen Transport in Solids Exposed to Fusion Reactor Plasmas, Part II: Applications of Theory,” J. Nucl. Mater., 122&123, 1523 (1984); http://dx.doi.org/10.1016/0022-3115(84)90295-2.
- R. G. HICKMAN, “Diffusion and Permeation of Deuterium in Palladium-Silver at High Temperature and Pressure,” J. Less-Common Met., 19, 369 (1969); http://dx.doi.org/10.1016/0022-5088(69)90182-9.
- T. SHIRAISHI et al., “Permeation of Multi-Component Hydrogen Isotopes through Nickel,” J. Nucl. Mater., 254, 205 (1998); http://dx.doi.org/10.1016/S0022-3115(97)00362-0.
- T. SHIRAISHI et al., “Permeation of Multi-Component Hydrogen Isotopes through Austenitic Stainless Steels,” J. Nucl. Mater., 273, 60 (1999); http://dx.doi.org/10.1016/S0022-3115(99)00018-5.
- R. FRAUENFELDER, “Solution and Diffusion of Hydrogen in Tungsten,” J. Vac. Sci. Technol., 6, 388 (1969); http://dx.doi.org/10.1116/1.1492699.
- A. P. ZAKHAROV et al., “Hydrogen Permeability of Polycrystalline and Monocrystalline Molybdenum and Tungsten,” Sov. Mater. Sci., 9, 149 (1973); http://dx.doi.org/10.1007/BF00715727.
- P. FRANZEN et al., “Hydrogen Trapping in and Release from Tungsten: Modeling and Comparison with Graphite with Regard to Its Use as Fusion Reactor Material,” J. Nucl. Mater., 241–243, 1082 (1997); http://dx.doi.org/10.1016/S0022-3115(97)80198-5.
- G. A. ESTEBAN et al., “Hydrogen Isotope Diffusive Transport Parameters in Pure Polycrystalline Tungsten,” J. Nucl. Mater., 295, 49 (2001); http://dx.doi.org/10.1016/S0022-3115(01)00486-X.
- H. NAKAMURA et al., “Implantation Driven Permeation Behavior of Deuterium through Pure Tungsten,” Fusion Eng. Des., 55, 513 (2001); http://dx.doi.org/10.1016/S0920-3796(01)00380-5.
- T. OTSUKA et al., “Visualization of Hydrogen Depth Profile by Means of Tritium Imaging Plate Technique: Determination of Hydrogen Diffusion Coefficient in Pure Tungsten,” Physica Scripta., T138, 014052 (2009); http://dx.doi.org/10.1088/0031-8949/2009/T138/014052.
- K. UEHARA et al., “Hydrogen Gas Driven Permeation through Tungsten Deposition Layer Formed by Hydrogen Plasma Sputtering,” Fusion Eng. Des., 98–99, 1341 (2015); http://dx.doi.org/10.1016/j.fusengdes.2015.01.027.
- R. A. ANDERL et al., “Hydrogen Transport Behavior of Metal Coatings for Plasma-Facing Components,” J. Nucl. Mater., 176&177, 683 (1990); http://dx.doi.org/10.1016/0022-3115(90)90127-9.
- Y. SOMEYA et al., “Design Study of Blanket Structure Based on a Water-Cooled Solid Breeder for DEMO,” Fusion Eng. Des., 98–99, 1872 (2015); http://dx.doi.org/10.1016/j.fusengdes.2015.05.042.
- H. Y. PENG et al., “Effect of Tungsten and Carbon Surface Mixed Layer on Deuterium Permeation in Tungsten,” J. Nucl. Mater., 438, S1063 (2013); http://dx.doi.org/10.1016/j.jnucmat.2013.01.233.
- H. T. LEE et al., “Ion-Driven Permeation of Deuterium through Tungsten under Simultaneous Helium and Deuterium Irradiation,” J. Nucl. Mater., 415, S696 (2011); http://dx.doi.org/10.1016/j.jnucmat.2010.12.023.
- E. SERRA et al., “Hydrogen Isotopes Transport Parameters in Fusion Reactor Materials,” J. Nucl. Mater., 255, 105 (1998); http://dx.doi.org/10.1016/S0022-3115(98)00038-5.
- Y. N. DOLINSKY et al., “Permeation of Deuterium and Tritium through the Martensitic Steel F82H,” J. Nucl. Mater., 307-311, 1484 (2002); http://dx.doi.org/10.1016/S0022-3115(02)01128-5.
- T. V. KULSARTOV et al., “Investigation of Hydrogen Isotope Permeation through F82H Steel with and without a Ceramic Coating of Cr2O3–Sio2 Including Crpo4 (Out-Of-Pile Tests),” Fusion Eng. Des., 81, 701 (2006); http://dx.doi.org/10.1016/j.fusengdes.2005.07.019.
- S. MATSUDA et al., “Hydrogen Permeation Behavior Through F82H at High Temperature,” Fusion Sci. Technol., 67, 467 (2015); http:// dx.doi.org/10.13182/FST14-T56.