References
- E. A. CLARK et al., “Evaluation of Alternate Stainless Steel Surface Treatments for Mass Spectroscopy and Other Tritium Systems,” SRNL-STI-2012-000181, Savannah River National Laboratory (2012).
- H. M. AJO et al., “Analysis of Passivated Surfaces for Mass Spectrometer Inlet Systems by Auger Electron and X-Ray Photoelectron Spectroscopy,” SRNL-STI-2010-00394, Savannah River National Laboratory (2010).
- H. PEEBLES et al., “Characterization and Performance of the CTCV-2 Tritium Transportation and Storage Package,” presentation at Tritium Focus Group Workshop, Las Alamos, New Mexico, 2015.
- J. T. GILL, “Effect of Container Preparation on the Growth of Protium and Methane Impurities in Tritium Gas,” J. Vac. Sci. Technol., 17, 645 (1980); http://dx.doi.org/10.1116/1.570532.
- T. Y. SASAKI, “Reducing SS 304∕316 Hydrogen Outgassing to 2 × 10−15 torr l/cm2s,” J. Vac. Sci. Technol. A, 25, 4, 1309 (2007); http://dx.doi.org/10.1116/1.2734151.
- Y. ISHIKAWAA and V. NEMANIC, “An Overview of Methods to Suppress Hydrogen Outgassing Rate from Austenitic Stainless Steel with Reference to UHV and EXV,” Vacuum, 69, 501 (2003); http://dx.doi.org/10.1016/S0042-207X(02)00562-6.
- ASTM A967, “Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts,” ASTM International, West Conshohocken, Pennsylvania (2013).
- ASTM B912, “Standard Specification for Passivation of Stainless Steels Using Electropolishing,” ASTM International, West Conshohocken, Pennsylvania (2013).
- AMS2700, “Passivation of Corrosion Resistant Steels,” SAE International (2011).
- K. ROKOSZ et al., “Comparative XPS Analysis of Passive Layers Composition Formed on AISI 304 L SS after Standard and High-Current Density Electropolishing,” Surf. Interface. Anal., 47, 1, 87 (2015); http://dx.doi.org/10.1002/sia.5676.
- Y. OZEKI et al., “Influence of Chromium Oxide Layer on Surface Trititum Contamination of Type 316 Stainless Steel,” Fusion Sci. Technol., 60, 1499 (Nov. 2011); http://dx.doi.org/10.13182/FST11-A12716.
- R. NUVOLONE, “Technology of Low-Pressure Systems− Establishment of Optimum Conditions to Obtain Low Degassing Rates on 316 L Stainless Steel by Heat Treatments,” J. Vac. Sci. Technol., 14, 5, 1210 (1977); http://dx.doi.org/10.1116/1.569388.
- C. D. PARK et al., “Reduction in Hydrogen Outgassing from Stainless Steels by a Medium-Temperature Heat Treatment,” J. Vac. Sci. Technol. A, 26, 5, 1166 (2008); http://dx.doi.org/10.1116/1.2956625.