References
- J. RAPP et al., “The Development of the Plasma-Material Interaction Facilities for the Future of Fusion Technology,” Fus. Sci. Technol., 64, 2, 237 (2013); https://doi.org/10.13182/FST12-565.
- A. LUMSDAINE et al., “Pre-Conceptual Design Activities for the Materials Plasma Exposure Experiment,” Fus. Eng. Des., 109–111, B, 1231 (2015).
- R. J. ELLIS and J. RAPP, “Neutron-Irradiated Samples as Test Materials for MPEX,” Fus. Sci. Technol., 68, 4, 750 (2015); https://doi.org/10.13182/FST14-909.
- http://www.vactran.com/ ( current as of Sept. 15, 2016).
- R. SCHNEIDER et al., “Plasma Edge Physics with B2-Eirene,” Contrib. Plasma Phys., 46, 1–2, 3 (2006); https://doi.org/10.1002/ctpp.200610001.
- Y. FENG et al., “3D Edge Modeling and Island Divertor Physics,” Contrib. Plasma Phys., 44, 1–3, 57 (2004); https://doi.org/10.1002/ctpp.200410009.
- D. REITER, M. BAELMANS, P. BÖRNER, “The EIRENE and B2-EIRENE Codes,” Fus. Sci. Technol., 47, 2, 172 (2005); https://doi.org/10.13182/FST47-172.
- J. RAPP et al., “Transport Simulations of Linear Plasma Generators with the B2.5-Eirene and EMC3-Eirene Codes,” J. Nucl. Mater., 463, 510 (2015); https://doi.org/10.1016/j.jnucmat.2014.12.058.
- G. A. BIRD, Molecular Gas Dynamics and the Direct Simulation of Gas Flows, Clarendon, Oxford (1994).
- H. J. N. VAN ECK et al., “Modeling and Experiments on Differential Pumping in Linear Plasma Generators Operating at High Gas Flows,” J. Appl. Phys., 105, 063307 (2009); https://doi.org/10.1063/1.3086622.
- J. HOWELL et al., “Calculation of Pressure Distribution in Vacuum Systems Using a Commercial Finite Element Program,” Proc. PAC 1991, 2297 (1991).
- M. LAFONTAINE et al., “Modeling Photoresist Outgassing Pressure Distribution Using the Finite Element Method,” Conf. Ion Implantation Technology (2000).
- J. RAPP et al., “The Development of the Material Plasma Exposure eXperiment MPEX,” IEEE Trans. Plasma Sci., 44, 12, 3456 (2016); https://doi.org/10.1109/TPS.2016.2628326.