References
- B. N. KOLBASOV et al., “Some Technological Problems of Fusion Materials Management,” Fusion Eng. Des., 89, 9–10, 2013 (2014); https://doi.org/10.1016/j.fusengdes.2014.01.044.
- L. EL-GUEBALY and M. ZUCCHETTI, “Progress and Challenges of Handling Fusion Radioactive Materials,” Fusion Sci. Technol., 68, 3, 484 (2015); https://doi.org/10.13182/FST14-952.
- M. ZUCCHETTI et al., “Recent Advances in Fusion Radioactive Material Studies,” Fusion Eng. Des., 88, 9–10, 2444 (2013); https://doi.org/10.1016/j.fusengdes.2013.02.050.
- M. ZUCCHETTI and G. MAZZONE, “Feasibility Assessment Regarding the Integration of Tritium Breeding Units in the Divertor Cassette 2015, DIV-1-T001-D003 – Final Report, with Further Activities for EUROFUSION 2015,” Politecnico di Torino Report, PT-DE-489 (2016).
- G. CASINI, P. ROCCO, and M. ZUCCHETTI, “Radioactivity Effects of Pb-17Li in Fusion Power Reactors,” Fusion Eng. Des., 17, 351 (1991); https://doi.org/10.1016/0920-3796(91)90080-A.
- D. HENDERSON et al., “Activation, Decay Heat, and Waste Disposal Analysis for ARIES-AT Power Plant,” Fusion Technol., 39, 2, 444 (2001).
- NEA, EASY-2010, European Neutron Activation System; https://www.oecd-nea.org/tools/abstract/detail/nea-1564 (current as of Aug. 18, 2016).
- L. EL-GUEBALY et al., “Design and Evaluation of Nuclear System for ARIES-ACT-2 Power Plant with DCLL Blanket,” Fusion Sci. Technol., 72, 1, 17 (2017); https://doi.org/10.1080/15361055.2016.1273669.
- J. N. BROOKS et al., “Plasma Facing Material Alternatives to Tungsten,” Nucl. Fusion, 55, 4 (2015); https://doi.org/10.1088/0029-5515/55/4/043002.
- J. S. HERRING and S. FETTER, “Radioactive Waste Management Criteria in Fusion Reactor Materials Selection,” J. Nucl. Mater., 155–157, 597 (1988); https://doi.org/10.1016/0022-3115(88)90379-0.
- L. EL-GUEBALY et al., “Activation Assessment of Liquid Metal Corrosion-Resistant ODS Alloys,” University of Wisconsin Fusion Technology Institute Report, UWFDM-1422 (Sept. 2015); http://fti.neep.wisc.edu/pdf/fdm1422.pdf (current as of Aug. 18, 2016).
- Radiation Safety Regulations (NRB-99/2009), Hygienic Regulations and Standards (Sanpin 2.6.1.2523-09/2009), Ministry of Health of Russia, Moscow (2009) (in Russian); http://www.complexdoc.ru/ntd/534510 (current as of Aug. 18, 2016).
- Basic Sanitary Regulations of Radiation Safety Assurance (OSPORB-99/2010), Sanitary Regulations and Standards (SP 2.6.1.2612-10), Federal Service for Supervision in the Field of Protection of Consumers and Well-Being of People of Russian Federation, Moscow (2010) (in Russian); http://nucloweb.jinr.ru/nucloserv/inform/instructions/osprb-99-2010.pdf (current as of Aug. 18, 2016).
- B. N. KOLBASOV, “Licensing of Fusion Facilities,” Prob. Atom. Sci. Technol., Series Thermonuclear Fusion, 37, 2, 84 (2014) (in Russian); https://doi.org/10.21517/0202-3822-2014-37-2-84-90.
- V. KHRIPUNOV, “Argon Generation in Fusion Reactor Materials,” Fusion Eng. Des., 98–99, 2166 (2015); https://doi.org/10.1016/j.fusengdes.2015.02.058.
- B. KOLBASOV, V. I. KHRIPUNOV, and A. Y. BIRYUKOV, “On Use of Beryllium in Fusion Reactors: Resources, Impurities and Necessity of Detritiation After Irradiation,” Fusion Eng. Des., 109–111, 480 (2016); https://doi.org/10.1016/j.fusengdes.2016.02.073.
- D. P. IVANOV et al., “Superconducting Magnet for Russian Fusion Neutron Source DEMO-FNS,” 25th IAEA Fusion Energy Conf., poster FIP/P7-10, Saint Petersburg, Russia, October 13–18, 2014, Russian Federation; http://www-naweb.iaea.org/napc/physics/FEC/FEC2014/fec_sourcebook_online.pdf (current as of Aug. 18, 2016).
- H. F. FANG, C. F. WANG, and C. K. LIN, “Improving Distillation Method and Device of Tritiated Water Analysis for Ultra High Decontamination Efficiency,” J. Environ. Radioact., 150, 62 (2015); https://doi.org/10.1016/j.jenvrad.2015.03.026.
- P. WANG et al., “Design, Fabrication, and Properties of a Continuous Carbon-Fiber Reinforced Sm2O3/Polyimide Gamma Ray/Neutron Shielding Material,” Fusion Eng. Des., 101, 218 (2015); https://doi.org/10.1016/j.fusengdes.2015.09.007.
- H. IIDA et al., “Radiation Shielding for ITER to Allow for Hands-On Maintenance Inside the Cryostat,” J. Nucl. Sci. Technol., Supplement 1, 235 (2000); https://doi.org/10.1080/00223131.2000.10874882.
- L. PETRIZZI et al., “Improvement and Benchmarking of the New Shutdown Dose Estimation Method by Monte Carlo Code, Advanced Monte Carlo for Radiation Physics, Particle Transport Simulation and Applications,” Proc. MC2000 Conf., Lisbon, Portugal, October 23–26, 2000, p. 865, Springer (2001).
- University of Wisconsin Rigorous Two Step Activation Work Flow (R2S-ACT) User Manual; http://svalinn.github.io/r2s-act/index.html (current as of Aug. 18, 2016).
- Y. CHEN and U. FISCHER, “Rigorous MCNP Based Shutdown Dose Rate Calculations: Computational Scheme, Verification Calculations and Applications, ITER,” Fusion Eng. Des., 63–64, 107 (2002); https://doi.org/10.1016/S0920-3796(02)00144-8.
- J. JO et al., “Sample Design and Gamma-Ray Counting Strategy of Neutron Activation System for Triton Burnup Measurements in KSTAR,” Fusion Eng. Des., 109–111, 545 (2016); https://doi.org/10.1016/j.fusengdes.2016.02.058.
- Y. SOMEYA et al., “Management Scenario for Reduction of Radioactive Waste on a Fusion DEMO Reactor,” Fusion Sci. Technol., 68, 423 (2015); https://doi.org/10.13182/FST15-101.
- Y. SOMEYA et al., “Safety and Waste Management Studies as Design Feedback for a Fusion DEMO Reactor in Japan,” presented at 26th IAEA Fusion Energy Conf. (FEC 2016), SEE/P7-5.