References
- A. SAGARA et al., “Design and Development of the Flibe Blanket for Helical-Type Fusion Reactor FFHR,” Fusion Eng. Des., 49–50, 661 (2000); https://doi.org/10.1016/S0920-3796(00)00360-4.
- A. SAGARA et al., “Helical Reactor Design FFHR-D1 and C1 for Steady-State DEMO,” Fusion Eng. Des., 89, 2114 (2014); https://doi.org/10.1016/j.fusengdes.2014.02.076.
- A. SAGARA et al., “Design Activities on Helical DEMO Reactor FFHR-d1,” Fusion Eng. Des., 87, 594 (2012); https://doi.org/10.1016/j.fusengdes.2012.01.030.
- J. TAKEUCHI et al., “Development of PIV Technique Under Magnetic Fields and Measurement of Turbulent Pipe Flow of Flibe Simulant Fluid,” Fusion Sci. Technol., 52, 4, 860 (2007); https://doi.org/10.13182/FST07-A1600.
- T. YOKOMINE et al., “Experimental Investigation of Turbulent Heat Transfer of High Prandtl Number Fluid Flow Under Strong Magnetic Field,” Fusion Sci. Technol., 52, 3, 625 (2007); https://doi.org/10.13182/FST07-A1558.
- A. SAGARA et al., “First Operation of the Flinak/LiPb Twin Loop Orosh2i-2 with a 3T SC Magnet for R&D of Liquid Blanket for Fusion Reactor,” Fusion Sci. Technol., 68, 2, 303 (2015); https://doi.org/10.13182/FST15-126.
- S. SMOLENTSEV, R. MIRAGHAIE, and M. ABDOU, “MHD Effects on Heat Transfer in a Molten Salt Blanket,” Fusion Sci. Technol., 47, 3, 559 (2005); https://doi.org/10.13182/FST05-A744.
- S. SMOLENTSEV et al., “Application of the ‘K–Ε’ Model to Open Channel Flows in a Magnetic Field,” Int. J. Eng. Sci., 40, 693 (2002); https://doi.org/10.1016/S0020-7225(01)00088-X.
- S. SATAKE et al., “Direct Numerical Simulation of Turbulent Channel Flow Under a Uniform Magnetic Field for Large-Scale Structures at High Reynolds Number,” Phys. Fluids, 18, 125106 (2006); https://doi.org/10.1063/1.2404943.
- T. BOECK, D. KRASNOV, and E. ZIENICKE, “Numerical Study of Turbulent Magnetohydrodynamic Channel Flow,” J. Fluid Mech., 572, 179 (2007); https://doi.org/10.1017/S0022112006003673.
- C. KAWCZYNSKI, S. SMOLENTSEV, and M. ABDOU, “An Induction-Based Magnetohydrodynamic 3D Code for Finite Magnetic Reynolds Number Liquid-Metal Flows in Fusion Blankets,” Fusion Eng. Des., 109–111, 422 (2016); https://doi.org/10.1016/j.fusengdes.2016.02.088.
- Y. YAMAMOTO et al., “DNS and K–Ɛ Model Simulation of MHD Turbulent Channel Flows with Heat Transfer,” Fusion Eng. Des., 83, 1309 (2008); https://doi.org/10.1016/j.fusengdes.2008.10.001.
- Y. YAMAMOTO and T. KUNUGI, “Modeling of MHD Turbulent Heat Transfer in Channel Flows Imposed Wall-Normal Magnetic Fields Under the Various Prandtl Number Fluids,” Fusion Eng. Des., 109–111, 1130 (2016); https://doi.org/10.1016/j.fusengdes.2016.01.004.
- W. P. JONES and B. LAUNDER, “The Prediction of Laminarization with a Two-Equation Model of Turbulence,” Int. J. Heat Mass. Transfer, 15, 2, 301 (1972); https://doi.org/10.1016/0017-9310(72)90076-2.
- A. J. REYNOLDS, “The Prediction of Turbulent Prandtl and Schmidt Numbers,” Int. J. Heat Mass. Transfer, 18, 9, 1055 (1975); https://doi.org/10.1016/0017-9310(75)90223-9.
- Y. NAGANO and M. SHIMADA, “Rigorous Modeling of Dissipation-Rate Equation Using Direct Simulations,” JSME Int. J. Ser. B, 38, 1, 51 (1995); https://doi.org/10.1299/jsmeb.38.51.
- S. KENJERES and K. HANJALIC, “On the Implementation of Effects of Lorentz Force in Turbulence Closure Models,” Int. J. Heat Fluid Flow, 21, 329 (2000); https://doi.org/10.1016/S0142-727X(00)00017-5.
- Y. YAMAMOTO and T. KUNUGI, “MHD Effects on Turbulent Dissipation Process in Channel Flows with an Imposed Wall-Normal Magnetic Field,” Fusion Eng. Des., 109–111, 1137 (2016); https://doi.org/10.1016/j.fusengdes.2016.01.003.
- Y. YAMAMOTO and T. KUNUGI, “Discussion on Heat Transfer Correlation in Turbulent Channel Flow Imposed Wall-Normal Magnetic Field,” Fusion Eng. Des., 86, 2886 (2011); https://doi.org/10.1016/j.fusengdes.2011.06.007.
- Y. YAMAMOTO and T. KUNUGI, “Direct Numerical Simulation of MHD Heat Transfer in High Reynolds Number Turbulent Channel Flows for Prandtl Number of 25,” Fusion Eng. Des., 90, 17 (2015); https://doi.org/10.1016/j.fusengdes.2014.10.005.
- R. SERRANO-LOPEZ, J. FRADERA, and S. CUESTA-LOPEZ, “Molten Salts Database for Energy Applications,” Chem. Eng. Proc., 73, 87 (2013); https://doi.org/10.1016/j.cep.2013.07.008.
- C. P. C. WONG et al., “Molten Salt Self-Cooled Solid First Wall and Blanket Design Based on Advanced Ferritic Steel,” Fusion Eng. Des., 72, 245 (2004); https://doi.org/10.1016/j.fusengdes.2004.07.011.
- J. TAKEUCHI et al., “Experimental Study of MHD Effects on Turbulent Flow of Flibe Simulant Fluid in Circular Pipe,” Fusion Eng. Des., 83, 1082 (2008); https://doi.org/10.1016/j.fusengdes.2008.08.050.