References
- R. L. KLUEH and D. R. HARRIES, High-Chromium Ferritic and Martensitic Steels for Nuclear Applications, p. 5, ASTM, West Conshohocken, Pennsylvania (2001).
- R. L. KLUEH and A. T. NELSON, “Ferritic/Martensitic Steels for Next-Generation Reactors,” J. Nucl. Mater., 371, 1, 37 (2007); https://doi.org/10.1016/j.jnucmat.2007.05.005.
- H. TANIGAWA et al., “Status and Key Issues of Reduced Activation Ferritic/Martensitic Steels as the Structural Material for a DEMO Blanket,” J. Nucl. Mater., 417, 1–3, 9 (2011); https://doi.org/10.1016/j.jnucmat.2011.05.023.
- S. A. DAVID, J. A. SIEFERT, and Z. FENG, “Welding and Weldability of Candidate Ferritic Alloys for Future Advanced Ultrasupercritical Fossil Power Plants,” Sci. Technol. Weld. Join., 18, 8, 631 (2013); https://doi.org/10.1179/1362171813Y.0000000152.
- N. SRIDHARAN et al., “Design, Fabrication, and Characterization of Graded Transition Joints,” Wire J. Int., 96, 8, 295S (2017).
- N. SRIDHARAN et al., “On the Toughness Scatter in Low Alloy C-Mn Steel Samples Fabricated Using Wire Arc Additive Manufacturing,” Mater. Sci. Eng. A, 713, 18 (2018); https://doi.org/10.1016/j.msea.2017.11.101.
- S. S. BABU et al., “Additive Manufacturing of Nickel Superalloys: Opportunities for Innovation and Challenges Related to Qualification,” Metall. Mater. Trans. A, 49, 3764 (2018); https://doi.org/10.1007/s11661-018-4702-4.
- N. SRIDHARAN et al., “Texture Evolution During Laser Direct Metal Deposition of Ti-6Al-4V,” JOM, 68, 3, 772 (2016); https://doi.org/10.1007/s11837-015-1797-6.
- J. A. SIEFERT and S. A. DAVID, “Weldability and Weld Performance of Candidate Austenitic Alloys for Advanced Ultrasupercritical Fossil Power Plants,” Sci. Technol. Weld. Join., 19, 4, 271 (2014); https://doi.org/10.1179/1362171814Y.0000000197.
- J. C. LIPPOLD and D. J. KOTECKI, Welding Metallurgy and Weldability of Stainless Steels, p. 141, John Wiley and Sons, Hoboken, New Jersey (2005).
- J. C. LIPPOLD, “Transformation and Tempering Behavior of 12Cr-1Mo-0.3V Martensitic Stainless Steel Weldments,” J. Nucl. Mater., 104, 1127 (1981); https://doi.org/10.1016/0022-3115(82)90752-8 .
- S. S. BABU et al., “Modelling and Characterization of Nonequilibrium Weld Microstructure Evolution,” U.S. Department of Energy (2003).
- P. E. WALTER and J. SPERKO, “Exploring Temper Bead Welding,” Weld. J., 84, 7, 2 (2005).
- A. K. BHADURI et al., “Evaluation of Repair Welding Procedures for 2.25Cr–1Mo and 9Cr–1Mo Steel Welds,” Sci. Technol. Weld. Join., 6, 89 (2001); https://doi.org/10.1179/136217101101538587.
- W. F. NEWELL Jr., “Guideline for Welding P(T)91,” Euroweld, W. F. Newell & Associates (1991).
- O. GRONG, Metallurgical Modelling of Welding, The Institute of Materials, London (1997).
- L. TAN, L. L. SNEAD, and Y. KATOH, “Development of New Generation Reduced Activation Ferritic-Martensitic Steels for Advanced Fusion Reactors,” J. Nucl. Mater., 478, 42 (2016); https://doi.org/10.1016/j.jnucmat.2016.05.037.
- K. SAWADA et al., “Effect of Nitrogen Content on Microstructural Aspects and Creep Behavior in Extremely Low Carbon 9Cr Heat-Resistant Steel,” ISIJ Int., 44, 1243 (2004); https://doi.org/10.2355/isijinternational.44.1243.
- K. KUSSMAUL, F. W. SCHOCH, and H. LUCKOW, “High Quality Large Components ‘Shape Welded’ by a SAW Process,” Weld. J., 62, 9, 17 (1983).
- R. L. KLUEH, “Elevated Temperature Ferritic and Martensitic Steels and Their Application to Future Nuclear Reactors,” Int. Mater. Rev., 50, 5, 287 (2005); https://doi.org/10.1179/174328005X41140.
- X. TAO, J. GU, and L. HAN, “Carbonitride Dissolution and Austenite Grain Growth in a High Cr Ferritic Heat-Resistant Steel,” ISIJ Int., 54, 1705 (2014); https://doi.org/10.2355/isijinternational.54.1705.
- M. N. GUSSEV et al., “Sub-Size Tensile Specimen Design for In-Reactor Irradiation and Post-Irradiation Testing,” Nucl. Eng. Des., 320, 298 (2017); https://doi.org/10.1016/j.nucengdes.2017.06.008.
- M. SONG et al., “A Roadmap for Tailoring the Strength and Ductility of Ferritic/Martensitic T91 Steel via Thermo-Mechanical Treatment,” Acta Mater., 112, 361 (2016); https://doi.org/10.1016/j.actamat.2016.04.031.
- F. ABE, “Precipitate Design for Creep Strengthening of 9% Cr Tempered Martensitic Steel for Ultra-Supercritical Power Plants,” Sci. Technol. Adv. Mater., 9, 1 (2008); https://doi.org/10.1088/1468-6996/9/1/013002.
- J. OÑORO, “Martensite Microstructure of 9–12%Cr Steels Weld Metals,” J. Mater. Process. Technol., 180, 137 (2006); https://doi.org/10.1016/j.jmatprotec.2006.05.014.
- J. OÑORO, “Weld Metal Microstructure Analysis of 9–12%Cr Steels,” Int. J. Press. Vessel. Pip., 83, 540 (2006); https://doi.org/10.1016/j.ijpvp.2006.03.005.
- W. K. C. JONES and P. J. ALBERRY, “Model for Stress Accumulation in Steels During Welding,” Proc. Conf. Residual Stresses in Welded Construction and Their Effects, London, 1978, p. 15, Welding Institute ( 1978).
- J. A. FRANCIS, H. BHADESHIA, and P. J. WITHERS, “Welding Residual Stresses in Ferritic Power Plant Steels,” Mater. Sci. Technol., 23, 9, 1009 (2007); https://doi.org/10.1179/174328407X213116.
- G. ÇAM, O. ÖZDEMIR, and M. KOÇAK, “Progress in Low Transformation Temperature (LTT) Filler Wires: Review,” Proc. 63rd Annual Assembly and Int. Conf. of International Institute of Welding 2010, Istanbul, Turkey, July 11–17, 2010, p. 759 (2010).
- S. NIYANTH et al., “Understanding Part to Part Variability During Directed Energy Deposition Processes Using In-Situ and Ex-Situ Process Characterization,” Oak Ridge National Laboratory (2018).
- E. CAKMAK et al., “Feasibility Study of Making Metallic Hybrid Materials Using Additive Manufacturing,” Metall. Mater. Trans. A, 49, 5035 (2018); https://doi.org/10.1007/s11661-018-4741-x.
- R. R. DEHOFF et al., “Site Specific Control of Crystallographic Grain Orientation Through Electron Beam Additive Manufacturing,” Mater. Sci. Technol., 31, 8, 931 (2015); https://doi.org/10.1179/1743284714Y.0000000734.