References
- Y. C. F. THIO et al., “Magnetized Target Fusion in a Spheroidal Geometry with Standoff Drivers,” Current Trends in International Fusion Research—Proceedings of the Second International Symposium, p. 113, E. PANARELLA, Ed., National Research Council of Canada, Ottawa, Canada (1999).
- S. C. HSU et al., “Spherically Imploding Plasma Liners as a Standoff Driver for Magnetoinertial Fusion,” IEEE Trans. Plasma Sci., 40, 1287 (2012); https://doi.org/10.1109/TPS.2012.2186829.
- S. C. HSU et al., “Experiment to Form and Characterize a Section of a Spherically Imploding Plasma Liner,” IEEE Trans. Plasma Sci., 46, 1951 (2018); https://doi.org/10.1109/TPS.2017.2779421.
- Y. C. F. THIO et al., “Plasma-Jet-Driven Magneto-Inertial Fusion,” Fusion Sci. Technol., 75 (2019); https://doi.org/10.1080/15361055.2019.1598736.
- G. A. WURDEN et al., “Magneto-Inertial Fusion,” J. Fusion Energy, 35, 69 (2016); https://doi.org/10.1007/s10894-015-0038-x.
- Y. C. F. THIO et al., “Coaxial Plasma Gun Development for Plasma-Jet-Driven Magneto-Inertial Fusion (PJMIF),” Bull. Am. Phys. Soc., DPP, BM9.00002 (2018).
- J. T. CASSIBRY, M. STANIC, and S. C. HSU, “Ideal Hydrodynamic Scaling Relations for a Stagnated Imploding Spherical Plasma Liner Formed by an Array of Merging Plasma Jets,” Phys. Plasmas, 20, 032706 (2013); https://doi.org/10.1063/1.4795732.
- W. SHIH et al., “Simulation Study of the Influence of Experimental Variations on the Structure and Quality of Plasma Liners,” Phys. Plasmas, 26, 032704 (2019); https://doi.org/10.1063/1.5067395.
- S. LIU et al., “Current Sheet Characteristics of a Parallel-Plate Electromagnetic Plasma Accelerator Operated in Gas-Prefilled Mode,” Phys. Plasmas, 25, 053506 (2018); https://doi.org/10.1063/1.5004115.
- Y. C. F. THIO et al., “Nuclear Blast and Electrode Lifetimes in a PJMIF Reactor,” Bull. Am. Phys. Soc., 62 (2017); http://meetings.aps.org/link/BAPS.2017.DPP.UP11.123.
- “MCNP Users Manual—Code Version 6.2, LA-UR-17-29981, C. J. WERNER, Ed., Los Alamos National Laboratory (2017).
- S. T. HOLLOWAY et al., “A Manual for CINDER2008—Codes and Data,” LA-UR-11-00006, Los Alamos National Laboratory (2011).
- S. C. HSU and S. J. LANGENDORF, “Magnetized Plasma Target for Plasma-Jet-Driven Magneto-Inertial Fusion,” J. Fusion Energy, 38, 182 (2019); https://doi.org/10.1007/s10894-018-0168-z.
- C. E. KNAPP and R. C. KIRKPATRICK, “Possible Energy Gain for a Plasma-Liner-Driven Magneto-Inertial Fusion Concept,” Phys. Plasmas, 21, 070701 (2014); https://doi.org/10.1063/1.4885075.
- ABAQUS 2018, Dassault Systemés Simulia Corporation, Johnston, Rhode Island (2018).
- N. YAMANOUCHI et al., “Accumulation of Engineering Data for Practical Use of Reduced Activation Ferritic Steel: 8%Cr-2%W-0.2%V-0.04%Ta-Fe,” J. Nucl. Mater., 191, 822 (1992); https://doi.org/10.1016/0022-3115(92)90587-B.
- Nuclides and Isotopes: Chart of the Nuclides, Knolls Atomic Power Laboratory/Bechtel, Schenectady, New York (2010).
- M. B. CHADWICK et al., “ENDF/B-VII.1 Nuclear Data for Science and Technology: Cross Sections, Covariances, Fission Product Yields and Decay Data,” Nucl. Data Sheets, 112, 2887 (2011); https://doi.org/10.1016/j.nds.2011.11.002.
- R. A. FORREST et al., “FENDL-3 Library—Summary Documentation,” INDC(NDS)-0628, International Atomic Energy Agency (Dec. 2012).
- ASTM E521-2016, “Standard Practice for Investigating the Effects of Neutron Radiation Damage Using Charged-Particle Irradiation,” ASTM International, West Conshohocken, Pennsylvania (2016); https://doi.org/10.1520/E0521-16,www.astm.org.
- R. MacFARLANE et al., “The NJOY Nuclear Data Processing System, Version 2016,” LA-UR-17-20093, Los Alamos National Laboratory (2016).
- M. L. FENSIN et al., “Incorporation of a Predictor-Corrector Methodology and 1-Group Reaction Rate Reporting Scheme for the MCNPX Depletion Capability,” Trans. Am. Nucl. Soc., 95, 317 (2006).
- M. L. FENSIN, J. S. HENDRICKS, and S. ANGHAIE, “The Enhancements and Testing for the MCNPX 2.6.0 Depletion Capability,” Nucl. Technol., 170, 68 (2010); https://doi.org/10.13182/NT10-2.
- W. B. WILSON et al., “A Manual for CINDER’90—Version 07.4 Codes and Data,” LA-UR-07-8412, Los Alamos National Laboratory (2007).
- S. J. ZINKLE and B. N. SINGH, “Analysis of Displacement Damage and Defect Production Under Cascade Damage Conditions,” J. Nucl. Mater., 199, 173 (1993); https://doi.org/10.1016/0022-3115(93)90140-T.
- M. J. NORGETT, M. T. ROBINSON, and I. M. TORRENS, “A Proposed Method of Calculating Displacement Dose Rates,” Nucl. Eng. Des., 33, 50 (1975); https://doi.org/10.1016/0029-5493(75)90035-7.
- T. TANNO et al., “Microstructure Development in Neutron Irradiated Tungsten Alloys,” Mater. Trans., 52, 1447 (2011); https://doi.org/10.2320/matertrans.MBW201025.