References
- R. A. PITTS et al., “A Full Tungsten Divertor for ITER: Physics Issues and Design Status,” J. Nucl. Mater., 438, S48 (2013); https://doi.org/10.1016/j.jnucmat.2013.01.008.
- M. MEROLA et al., “ITER Plasma-Facing Components,” Fusion Eng. Des., 85, 2312 (2010); https://doi.org/10.1016/j.fusengdes.2010.09.013.
- R. A. PITTS et al., “Physics Basis and Design of the ITER Plasma-Facing Components,” J. Nucl. Mater., 415, S957 (2011); https://doi.org/10.1016/j.jnucmat.2011.01.114.
- M. KIKUCHI et al., Fusion Physics, Chap. 7, p. 834, International Atomic Energy Agency (2012).
- J. COBURN et al., “Erosion Characterization of SiC and Ti3SiC2 on DIII-D Using Focused Ion Beam Micro-Trenches,” Nucl. Mater. Energy, 19, 316 (2019); https://doi.org/10.1016/j.nme.2019.02.036.
- M. BARSOUM, MAX Phases: Properties of Machinable Ternary Carbides and Nitrides, Wiley-VCH Verlag GmbH and Company (2013).
- D. J. TALLMAN et al., “Effect of Neutron Irradiation on Select MAX Phases,” Acta Mater., 85, 132 (2015); https://doi.org/10.1016/j.actamat.2014.10.068.
- D. W. CLARK et al., “High Temperature Ion Irradiation Effects in MAX Phase Ceramics,” Acta Mater., 105, 130 (2016); https://doi.org/10.1016/j.actamat.2015.11.055.
- D. J. TALLMAN et al., “Effects of Neutron Irradiation of Ti3SiC2 and Ti3AlC2 in the 121-1805°C Temperature Range,” J. Nucl. Mater., 484, 120 (2017); https://doi.org/10.1016/j.jnucmat.2016.11.016.
- L. L. SNEAD et al., “Silicon Carbide Composites as Fusion Power Reactor Structural Materials,” J. Nucl. Mater., 417, 330 (2011); https://doi.org/10.1016/j.jnucmat.2011.03.005.
- L. L. SNEAD et al., “Handbook of SiC Properties for Fuel Performance Modeling,” J. Nucl. Mater., 371, 329 (2007); https://doi.org/10.1016/j.jnucmat.2007.05.016.
- A. IVEKOVIC et al., “Current Status and Prospects of SiCf/SiC for Fusion Structural Applications,” J. Eur. Ceram. Soc., 33, 10 (2013); https://doi.org/10.1016/j.jeurceramsoc.2013.02.013.
- Y. KATOH et al., “Current Status and Recent Research Achievements in SiC/SiC Composites,” J. Nucl. Mater., 455, 387 (2014); https://doi.org/10.1016/j.jnucmat.2014.06.003.
- “CVD Silicon Carbide Data Sheet,” Rohm and Haas (2008).
- T. E. GEBHART et al., “Material Impacts and Heat Flux Characterization of an Electrothermal Plasma Source with an Applied Magnetic Field,” J. Appl. Phys., 122, 063302 (2017); https://doi.org/10.1063/1.4998683.
- M. A. BOURHAM et al., “Vapor Shielding and Erosion of Surfaces Exposed to a High Heat Load in an Electrothermal Accelerator,” IEEE Trans. Plasma Sci., 17, 3, 386 (1989); https://doi.org/10.1109/27.32246.
- A. L. WINFREY et al., “A Study of Plasma Parameters in a Capillary Discharge with Calculations Using Ideal and Nonideal Plasma Models for Comparison with Experiment,” IEEE Trans. Plasma Sci., 40, 843 (2012); https://doi.org/10.1109/TPS.2011.2179985.
- J. G. GILLIGAN and M. A. BOURHAM, “The Use of an Electrothermal Plasma Gun to Simulate the Extremely High Heat Flux Conditions of a Tokamak Disruption,” J. Fusion Energy, 12, 311 (1993); https://doi.org/10.1007/BF01079675.
- R. KHAZIEV and D. CURRELI, “Ion Energy-Angle Distribution Functions at the Plasma-Material Interface in Oblique Magnetic Fields,” Phys. Plasmas, 22, 043503 (2015); https://doi.org/10.1063/1.4916910.
- I. BORODKINA et al., “An Analytical Expression for the Electric Field and Particle Tracing in Modelling of Be Erosion Experiments at the JET ITER-Like Wall,” Contrib. Plasma Phys., 56, 6–8, 640 (2016); https://doi.org/10.1002/ctpp.201610032.
- N. M. ALMOUSA, J. G. GILLIGAN, and M. BOURHAM, “Surface Ablation and Melting of Fusion Materials Simulated by Transient High Heat Flux Generated in an Electrothermal Plasma Source,” IEEE Trans. Plasma Sci., 44, 9, 1642 (2016); https://doi.org/10.1109/TPS.2016.2566445.
- H. MAIER et al., “Erosion Behavior of Actively Cooled Tungsten Under H/He High Heat Flux Load,” J. Nucl. Mater., 438, S921 (2013); https://doi.org/10.1016/j.jnucmat.2013.01.200.
- A. LITNOVSKY et al., “Smart Alloys for a Future Fusion Power Plant: First Studies Under Stationary Plasma Load and in Accidental Conditions,” Nucl. Mater. Energy, 12, 1363 (2017); https://doi.org/10.1016/j.nme.2016.11.015.
- “Emissivity in the Infrared: Emissivity Values,” Optotherm Thermal Imaging; https://www.optotherm.com/emiss-table.htm ( current as of Aug. 15, 2018).