References
- Y. KATOH et al., “Continuous SiC Fiber, CVI SiC Matrix Composites for Nuclear Applications: Properties and Irradiation Effects,” J. Nucl. Mater., 448, 1, 448 (2014); https://doi.org/10.1016/j.jnucmat.2013.06.040.
- A. R. RAFFRAY et al., “High Performance Blanket for ARIES-AT Power Plant,” Fusion Eng. Des., 58–59, 549 (2001); https://doi.org/10.1016/S0920-3796(01)00493-8.
- L. GIANCARLI et al., “Design Requirements for SiC/SiC Composites Structural Material in Fusion Power Reactor Blankets,” Fusion Eng. Des., 41, 1, 165 (1998); https://doi.org/10.1016/S0920-3796(97)00200-7.
- B. RICCARDI et al., “Status of the European R&D Activities on SiCf/SiC Composites for Fusion Reactors,” Fusion Eng. Des., 51–52, 11 (2000); https://doi.org/10.1016/S0920-3796(00)00311-2.
- S. UEDA et al., “A Fusion Power Reactor Concept Using SiC/SiC Composites,” J. Nucl. Mater., 258–263, 1589 (1998); https://doi.org/10.1016/S0022-3115(98)00294-3.
- R. H. JONES et al., “Promise and Challenges of SiCf/SiC Composites for Fusion Energy Applications,” J. Nucl. Mater., 307–311, 1057 (2002); https://doi.org/10.1016/S0022-3115(02)00976-5.
- R. H. JONES et al., “Radiation Resistant Ceramic Matrix Composites,” J. Nucl. Mater., 245, 2, 87 (1997); https://doi.org/10.1016/S0022-3115(97)00022-6.
- S. SMOLENTSEV et al., “Numerical Modeling of First Experiments on PbLi MHD Flows in a Rectangular Duct with Foam-Based SiC Flow Channel Insert,” Fusion Eng. Des., 108, 7 (2016); https://doi.org/10.1016/j.fusengdes.2016.04.035.
- T. KOYANAGI et al., “Recent Progress in the Development of SiC Composites for Nuclear Fusion Applications,” J. Nucl. Mater., 511, 544 (2018); https://doi.org/10.1016/j.jnucmat.2018.06.017.
- Y. KATOH et al., “SiC/SiC Composites Through Transient Eutectic-Phase Route for Fusion Applications,” J. Nucl. Mater., 329–333, 587 (2004); https://doi.org/10.1016/j.jnucmat.2004.04.157.
- W. KOWBEL et al., “Silicon Carbide Fibers and Composites from Graphite Precursors for Fusion Energy Applications,” J. Nucl. Mater., 219, 15, 15 (1995); https://doi.org/10.1016/0022-3115(94)00393-9.
- K. HIRONAKA et al., “High-Temperature Tensile Strength of Near-Stoichiometric SiC/SiC Composites,” J. Nucl. Mater., 307–311, 1093 (2002); https://doi.org/10.1016/S0022-3115(02)01049-8.
- K. SHIMODA et al., “Enhanced High-Temperature Performances of SiC/SiC Composites by High Densification and Crystalline Structure,” Compos. Sci. Technol., 71, 3, 326 (2011); https://doi.org/10.1016/j.compscitech.2010.11.026.
- T. NODA, A. KOHYAMA, and Y. KATOH, “Recent Progress of SiC-Fibers and SiC/SiC-Composites for Fusion Applications,” Phys. Scr., T91, 1, 124 (2001); https://doi.org/10.1238/Physica.Topical.091a00124.
- M. R. BEGLEY, B. N. COX, and R. M. McMEEKING, “Time Dependent Crack Growth in Ceramic Matrix Composites with Creeping Fibers,” Acta Metall. Mater., 43, 11, 3927 (1995); https://doi.org/10.1016/0956-7151(95)00103-3.
- H. ICHIKAWA, “Recent Advances in Nicalon Ceramic Fibres Including Hi-Nicalon Type S,” Ann. Chim. Sci. Matér., 25, 7, 523 (2000); https://doi.org/10.1016/S0151-9107(01)80004-0.
- T. ISHIKAWA et al., “High-Strength Alkali-Resistant Sintered SiC Fibre Stable to 2,200°C,” Nature, 391, 6669, 773 (1998); https://doi.org/10.1038/35820.
- J. J. SHA et al., “Effect of Heat Treatment on the Tensile Strength and Creep Resistance of Advanced SiC Fibers,” J. Nucl. Mater., 329–333, 592 (2004); https://doi.org/10.1016/j.jnucmat.2004.04.123.
- G. N. MORSCHER et al., “Comparison of Bend Stress Relaxation and Tensile Creep of CVD SiC Fibers,” J. Am. Ceram. Soc., 78, 12, 3244 (2005); https://doi.org/10.1111/j.1151-2916.1995.tb07960.x.
- J. A. DICARLO, “Creep Limitations of Current Polycrystalline Ceramic Fibers,” Compos. Sci. Technol., 51, 2, 213 (1994); https://doi.org/10.1016/0266-3538(94)90191-0.
- J. J. SHA et al., “Bend Stress Relaxation of Advanced SiC-Based Fibers and Its Prediction to Tensile Creep,” Mech. Mater., 39, 2, 175 (2007); https://doi.org/10.1016/j.mechmat.2006.04.001.
- J. A. DICARLO and H.-M. YUN, Handbook of Ceramic Composites, pp. 33–54, Springer Science & Business Media (2006).
- Y. KATOH et al., “Thermophysical and Mechanical Properties of Near-Stoichiometric Fiber CVI SiC/SiC Composites After Neutron Irradiation at Elevated Temperatures,” J. Nucl. Mater., 403, 1, 48 (2010); https://doi.org/10.1016/j.jnucmat.2010.06.002.
- N. P. BANSAL, Handbook of Ceramic Composites, Springer US (2006).