References
- R. D. PENZHORN, M. DEVILLERS, and M. SIRCH, “Evaluation of ZrCo and Other Getters for Tritium Handling and Storage,” J. Nucl. Mater., 170, 3, 217 (1990); https://doi.org/10.1016/0022-3115(90)90292-U.
- T. FORDE et al., “Influence of Intrinsic Hydrogenation/Dehydrogenation Kinetics on the Dynamic Behaviour of Metal Hydrides: A Semi-Empirical Model and Its Verification,” Int. J. Hydrogen Energy, 32, 8, 1041 (2007); https://doi.org/10.1016/j.ijhydene.2006.07.015.
- J. BLOCH and M. H. MINTZ, “Kinetics and Mechanism of the U-H Reaction,” J. Less Common Met., 81, 2, 301 (1981); https://doi.org/10.1016/0022-5088(81)90036-9.
- M. SALLOUM and P. E. GHARAGOZLOO, “Empirical and Physics-Based Mathematical Models of Uranium Hydride Decomposition Kinetics with Quantified Uncertainty,” Chem. Eng. Sci., 116, 452 (2014); https://doi.org/10.1016/j.ces.2014.05.028.
- B. J. HARDY and D. L. ANTON, “Hierarchical Methodology for Modeling Hydrogen Storage Systems. Part I: Scoping Models,” Int. J. Hydrogen Energy, 34, 5, 2269 (2009); https://doi.org/10.1016/j.ijhydene.2008.12.070.
- B. J. HARDY and D. L. ANTON, “Hierarchical Methodology for Modeling Hydrogen Storage Systems. Part II: Detailed Models,” Int. J. Hydrogen Energy, 34, 7, 2992 (2009); https://doi.org/10.1016/j.ijhydene.2008.12.056.
- M. VALIZADEH, M. A. DELAVAR, and M. FARAHADI, “Numerical Simulation of Heat and Mass Transfer During Hydrogen Desorption in Metal Hydride Storage Tank by Lattice Boltzmann Method,” Int. J. Hydrogen Energy, 41, 1, 413 (2016); https://doi.org/10.1016/j.ijhydene.2015.11.075.
- T. FORDE, E. NÆSS, and V. A. YARTYS, “Modelling and Experimental Results of Heat Transfer in a Metal Hydride Store During Hydrogen Charge and Discharge,” Int. J. Hydrogen Energy, 34, 12, 5121 (2009); https://doi.org/10.1016/j.ijhydene.2009.03.019.
- “Tritium Storage and Delivery System (SDS),” ITER Korea”; https://www.iterkorea.org/eng/030208 (current as of May 30, 2019).
- M. GLUGLA et al., “ITER Fuel Cycle R&D: Consequences for the Design,” Fusion Eng. Des., 81, 1–7, 733 (2006); https://doi.org/10.1016/j.fusengdes.2005.07.038.
- H. CHUNG et al., “Korea’s Progress on the ITER Tritium Systems,” Fusion Eng. Des., 84, 2–6, 599 (2009); https://doi.org/10.1016/j.fusengdes.2009.01.073.
- K. M. SONG et al., “Development of Standard Operating Procedures for the SDS of the ITER Tritium Plant,” Fusion Eng. Des., 83, 10–12, 1380 (2008); https://doi.org/10.1016/j.fusengdes.2008.08.007.
- S. CHO et al., “ITER Storage and Delivery System R&D in Korea,” IEEE Trans. Plasma Sci., 38, 3, 425 (2010); https://doi.org/10.1109/TPS.2009.2039583.
- H.-G. KANG et al., “Development of Depleted Uranium Bed for Tritium Fuel Cycle and Basic Absorption/Desorption Experiments,” Fusion Eng. Des., 132, 86 (2018); https://doi.org/10.1016/j.fusengdes.2018.04.123.
- S. KYOUNG, H. YOO, and H. JU, “Numerical Comparison of Hydrogen Desorption Behaviors of Metal Hydride Beds Based on Uranium and on Zirconium-Cobalt,” Fusion Sci. Technol., 67, 2, 394 (2015); https://doi.org/10.13182/FST14-T37.
- G. GWAK et al., “Analyzing Effects of Volumetric Expansion of Uranium During Hydrogen Absorption,” Int. J. Hydrogen Energy, 42, 6, 3723 (2017); https://doi.org/10.1016/j.ijhydene.2016.08.176.
- S. YUN et al., “Analyzing Hydriding Performance in Full-Scale Depleted Uranium Beds,” Energy, 193, 116742 (2020); https://doi.org/10.1016/j.energy.2019.116742.
- A. BHATTACHARYA, V. V. CALMIDI, and R. L. MAHAJAN, “Thermophysical Properties of High Porosity Metal Foams,” Int. J. Heat Mass Transfer, 45, 5, 1017 (2002); https://doi.org/10.1016/S0017-9310(01)00220-4.
- D.-S. KOO et al., “Fabrication and Test of Thin Double-Layered Annulus Metal Hydride Bed,” Fusion Eng. Des., 86, 9–11, 2196 (2010); https://doi.org/10.1016/j.fusengdes.2010.11.024.
- G. G. LIBOWITZ and T. R. P. GIBB, “High Pressure Dissociation Studies of the Uranium Hydrogen System,” J. Phys. Chem., 61, 6, 793 (1957); https://doi.org/10.1021/j150552a024.
- J. NAM, J. KO, and H. JU, “Three-Dimensional Modeling and Simulation of Hydrogen Absorption in Metal Hydride Hydrogen Storage Vessels,” Appl. Energy, 89, 1, 164 (2012); https://doi.org/10.1016/j.apenergy.2011.06.015.
- G. L. POWELL et al., “The Kinetics of the Hydriding of Uranium Metal II,” Z. Phys. Chem., 181, 275 (1993); https://doi.org/10.1524/zpch.1993.181.Part_1_2.275.
- R. D. KOLASINSKI et al., “Uranium for Hydrogen Storage Applications: A Material Science Perspective,” SAND2010-5195, Sandia National Laboratories (2010).
- H. YOO, J. KO, and H. JU, “A Numerical Investigation of Hydrogen Absorption Phenomena in Thin Double-Layered Annulus ZrCo Beds,” Int. J. Hydrogen Energy, 38, 18, 7697 (2013); https://doi.org/10.1016/j.ijhydene.2012.08.153.
- C. Y. CHUNG et al., “High Thermal Conductive Diamond/Cu-Ti Composites Fabricated by Pressureless Sintering Technique,” Applied Thermal Engineering, 69, 1–2, 208 (2014); https://doi.org/10.1016/j.applthermaleng.2013.11.065.
- C. R. BROOKS et al., “The Specific Heat of Copper from 40 to 920°C*,” J. Phys. Chem. Solids, 29, 4, 565 (1968); https://doi.org/10.1016/0022-3697(68)90023-1.