References
- C. RUSET et al., “Development of Tungsten Coatings for Fusion Applications,” Fusion Eng. Des., 86, 1677 (2011); https://doi.org/https://doi.org/10.1016/j.fusengdes.2011.04.031.
- H. GREUNER et al., “Vacuum Plasma Sprayed Tungsten on EUROFER and 316L: Results of Characterization and Thermal Loading Tests,” Fusion Eng. Des., 75–79, 333 (2005); https://doi.org/https://doi.org/10.1016/j.fusengdes.2005.06.240.
- R. VENUGOPALAN et al., “Investigations on Neutron Irradiated 3D Carbon Fibre Reinforced Carbon Composite Material,” J. Nucl. Mater., 502, 276 (2018); https://doi.org/https://doi.org/10.1016/j.jnucmat.2018.01.038.
- N. ASHIKAWA et al., “Investigation of Carbon Dust Accumulation in the JT-60U Tokamak Vacuum Vessel,” J. Nucl. Mater., 438, Supplement, S659–S663 (2013); https://doi.org/https://doi.org/10.1016/j.jnucmat.2013.01.139.
- J. MATĚJÍČEK et al., “The Role of Laser Texturing in Improving the Adhesion of Plasma Sprayed Tungsten Coatings,” J. Thermal Spray Technol., 28, 1346 (2019); https://doi.org/https://doi.org/10.1007/s11666-019-00924-7.
- J. J. HUANG et al., “Vacuum Annealing Enhances the Properties of a Tungsten Coating Deposited on Copper by Atmospheric Plasma Spray,” J. Nucl. Mater., 432, 16 (2013); https://doi.org/https://doi.org/10.1016/j.jnucmat.2012.07.017.
- V. TOMARCHIO et al., “Status of the JT-60SA Project: An Overview on Fabrication, Assembly and Future Exploitation,” Fusion Eng. Des., 123, 3 (2017); https://doi.org/https://doi.org/10.1016/j.fusengdes.2017.05.105.
- H. MAIER et al., “Tungsten Coatings for the JET ITER-Like Wall Project,” J. Nucl. Mater., 363–365, 1246 (2007); https://doi.org/https://doi.org/10.1016/j.jnucmat.2007.01.246.
- S. TAMURA et al., “High-Temperature Properties of Joint Interface of VPS-Tungsten Coated CFC,” J. Nucl. Mater., 329–333, 711 (2004); https://doi.org/https://doi.org/10.1016/j.jnucmat.2004.04.186.
- F. WANG et al., “Properties of Active Water Cooling Atmospheric Plasma Spraying Tungsten Coating,” J. Fusion Energy, 37, 187 (2018); https://doi.org/https://doi.org/10.1007/s10894-018-0171-4.
- H. MAIER et al., “Development of Tungsten Coated First Wall and High Heat Flux Components for Application in ASDEX Upgrade,” J. Nucl. Mater., 307, 116 (2002); https://doi.org/https://doi.org/10.1016/S0022-3115(02)00941-8.
- C. RUSET et al., “Industrial Scale 10 µm Tungsten Coating of CFC Tiles for ITER-Like Wall Project at JET,” Fusion Eng. Des., 84, 1662 (2009); https://doi.org/https://doi.org/10.1016/j.fusengdes.2008.11.053.
- G. F. MATTHEWS et al., “Development of Divertor Tungsten Coatings for the JET ITER-Like Wall,” J. Nucl. Mater., 390–391, 934 (2009); https://doi.org/https://doi.org/10.1016/j.jnucmat.2009.01.239.
- T. HIRAI et al., “R&D on Full Tungsten Divertor and Beryllium Wall for JET ITER-Like Wall Project,” Fusion Eng. Des., 82, 1839 (2007); https://doi.org/https://doi.org/10.1016/j.fusengdes.2007.02.024.
- C. FALI, “Optimization of Plasma-Sprayed Tungsten Coating on Copper with the Heterogeneous Compliant Layer for Fusion Application,” J. Thermal Spray Technol., 22, 1, 57 (2013); https://doi.org/https://doi.org/10.1007/s11666-012-9869-4.
- C. RUSET et al., “Synthesis and Characterization of W Reinforced Carbon Coatings Produced by Combined Magnetron Sputtering and Ion Implantation Technique,” Thin Sol. Fil., 519, 4045 (2011); https://doi.org/https://doi.org/10.1016/j.tsf.2011.01.376.
- X. LIU et al., “Thermal Response of Plasma Sprayed Tungsten Coating to High Heat Flux,” Fusion Eng. Des., 70, 341 (2004); https://doi.org/https://doi.org/10.1016/j.fusengdes.2004.06.002.
- C. RUSET et al., “The Impact of Thermal Fatigue and Carbidization on the Tungsten Coatings Deposited on CFC Tiles for the ITER-Like Wall Project at JET,” Fusion Eng. Des., 88, 1690 (2013); https://doi.org/https://doi.org/10.1016/j.fusengdes.2013.02.017.
- O. V. OGORODNIKOVA et al., “Deuterium Retention in Dense and Disordered Nanostructured Tungsten Coatings,” J. Nucl. Mater., 507, 226 (2018); https://doi.org/https://doi.org/10.1016/j.jnucmat.2018.04.039.
- X. LIU et al., “Research and Development of Plasma Sprayed Tungsten Coating on Graphite and Copper Substrates,” J. Nucl. Mater., 363–365, 1299 (2007); https://doi.org/https://doi.org/10.1016/j.jnucmat.2007.01.182.
- K. TOKUNAGA et al., “Changes of Composition and Microstructure of Joint Interface of Tungsten Coated Carbon by High Heat Flux,” J. Nucl. Mater., 283–287, 1121 (2000); https://doi.org/https://doi.org/10.1016/S0022-3115(00)00384-6.
- D. D. QU et al., “Thermo-Mechanical Response of FG Tungsten/EUROFER Multilayer Under High Thermal Loads,” J. Nucl. Mater., 519, 137 (2019); https://doi.org/https://doi.org/10.1016/j.jnucmat.2019.03.019.
- I. TISEANU et al., “X-Ray Microbeam Transmission/Fluorescence Method for Non-Destructive Characterization of Tungsten Coated Carbon Materials,” Surf. Coat. Technol., 205, S192–S197 (2011); https://doi.org/https://doi.org/10.1016/j.surfcoat.2011.03.049.
- D. DEBORAH and L. CHUNG, Carbon Composites with Carbon Fibers, Nanofibers and Nanotubes, 2nd ed., Butterworth-Heinemann (2017).
- Y. ASAKURA et al., “Thermal Property and Microstructural Characterization of W/SiC Clad Plates,” Fusion Eng. Des., 125, 484 (2017); https://doi.org/https://doi.org/10.1016/j.fusengdes.2017.05.105.
- E. FITZER and L. M. MANOCHA, Carbon Reinforcements and Carbon/Carbon Composites, Springer-Verlag Berlin Heidelberg, Germany (1998); https://doi.org/https://doi.org/10.1007/978-3-642-58745-0.
- B. J. CHOI et al., “Growth of Silicon Carbide by Chemical Vapour Deposition,” J. Mater. Sci. Lett., 10, 14, 860 (1991); https://doi.org/https://doi.org/10.1007/BF00724761.
- C. GARCÍA-ROSALES et al., “High-Heat-Flux Loading of Tungsten Coatings on Graphite Ddeposited by Plasma Spray and Physical Vapor Deposition,” Fusion Technol., 32, 263 (1997); https://doi.org/https://doi.org/10.13182/FST97-A19896.
- C. RUSET et al., “Tungsten Coatings Deposited on CFC Tiles by the Combined Magnetron Sputtering and Ion Implantation Technique,” Phys. Scri., 2007, T128, 171 ( 2007); https://doi.org/https://doi.org/10.1088/0031-8949/2007/T128/033.
- H. KISHIMOTO et al., “Fabrication of Tungsten and Carbon Clad Plates by Sinter Bonding Methods for Divertor System Characterization,” Fusion Eng. Des., 136, 116 (2018); https://doi.org/https://doi.org/10.1016/j.fusengdes.2018.01.004.
- H.-K. KANG, “Thermal Properties of Plasma-Sprayed Tungsten Deposits,” J. Nucl. Mater., 335, 1 (2004); https://doi.org/https://doi.org/10.1016/j.jnucmat.2004.06.001.