Extracting the Residual Properties of Cracked Plies Utilizing a Unit Cell Model

References

• M.R. Garnich and V.M.K. Akula, Review of degradation models for progressive failure analysis of fiber reinforced polymer composites, Appl. Mech. Rev., vol. 62, pp. 1–33, 2009.
   Web of Science ®Google Scholar
• S. Abrate, Matrix cracking in laminated composites: A review, Compos. Eng., vol. 1, pp. 337–353, 1991.
   Google Scholar
• P.F. Liu and J.Y. Zheng, Recent developments on damage modeling and finite element analysis for composite laminates: A review, Mater. Des., vol. 31, pp. 3825–3834, 2010.
   Google Scholar
• J.A. Nairn and S. Hu, Matrix microcracking. In: Damage Mechanics of Composite Materials, R. Talreja, Ed., Elsevier Publishers, Amsterdam, pp. 187–243, 1994.
   Google Scholar
• D. Zhang, J. Ye, and D. Lan, Properties degradation induced by transverse cracks in general symmetric laminates, Int. J. Solids. Str., vol. 44, pp. 5499–5517, 2007.
   Web of Science ®Google Scholar
• H.T. Hahn, J. Kiusalaas, B.P. Burns, T.A. Bogetti, Constitutive modeling of composite laminates with progressive ply cracking, Computers in Engineering 1992: Proceedings of the International Computers in Engineering Conference, Vol. 2, pp. 185–193, . August 2–6, San Francisco, CA, 1992.
   Google Scholar
• P. Leblond, A. El Mahi, and J.M. Berthelot, 2D and 3D numerical models of transverse cracking in cross-ply laminates, Compos. Sci. Technol., vol. 56, pp. 793–796, 1996.
   Web of Science ®Google Scholar
• J.X. Tao and C.T. Sun, Effect of matrix cracking on stiffness of composite laminates, Mech, Compos. Mater. Struct., vol. 3, pp. 225–239, 1996.
   Google Scholar
• F.J. Guild, S.L. Ogin, and P.A. Smith, Modelling of 90° Ply cracking in crossply laminates, including three-dimensional effects, J. Compos. Mater., vol. 27, pp. 646–667, 1993.
   Web of Science ®Google Scholar
• B. Pradhan, N. Venu Kumar, and N.S. Rao, Stiffness degradation resulting from 90° ply cracking in angle-ply composite laminates, Compos. Sci. Technol., vol. 59, pp. 1543–1552, 1999.
   Web of Science ®Google Scholar
• N. Venu Kumar, B. Pradhan, and N.S. Rao, 3D finite element analysis of multiple transverse cracking in hybrid cross-ply composite laminates, J. Reinf. Plast. Compos., vol. 18, pp. 776–797, 1999.
   Web of Science ®Google Scholar
• J. Noh and J. Whitcomb, Effect of various parameters on the effective properties of a cracked ply, J. Compos. Mater., vol. 35, pp. 689–712, 2001.
   Web of Science ®Google Scholar
• S. Li, C.V. Singh, and R. Talreja, A representative volume element based on translational symmetries for FE analysis of cracked laminates with two arrays of cracks, Int. J. Solids. Str., vol. 46, pp. 1793–1804, 2009.
   Web of Science ®Google Scholar
• V.M.K. Akula and M.R. Garnich, Effective ply and constituent elastic properties for cracked laminates, Composites, Part B—Eng., vol. 43, pp. 2143–2151, 2012.
   Web of Science ®Google Scholar
• M.R. Garnich and A.C. Hansen, A multicontinuum approach to structural analysis of linear viscoelastic composite materials, J. Appl. Mech., vol. 64, pp. 795–803, 1997.
   Web of Science ®Google Scholar
• S. Nemat-Nasser and M. Hori, Micromechanics: Overall Properties of Heterogeneous Materials, Elsevier Publishers, Amsterdam, 1993.
   Google Scholar
• M.J. Pindera, H. Khatam, A.S. Drago, and Y. Bansal, Micromechanics of spatially uniform heterogeneous media: A critical review and emerging approaches, Composites, Part B, vol. 40, pp. 349–378, 2009.
   Web of Science ®Google Scholar
• X. Tang and J.D. Whitcomb, General techniques for exploiting periodicity and symmetries in micromechanics analysis of textile composites, J. Compos. Mater., vol. 37, pp. 1167–1189, 2003.
   Web of Science ®Google Scholar
• J.D. Whitcomb, C.D. Chapman, and X. Tang, Derivation of boundary conditions for micromechanics analyses of plain and satin weave composites, J. Compos. Mater., vol. 34, pp. 724–747, 2000.
   Web of Science ®Google Scholar
• C.T. Sun and R.S. Vaidya, Prediction of composite properties from a representative volume element, Compos. Sci. Technol., vol. 56, pp. 171–179, 1996.
   Web of Science ®Google Scholar
• Abaqus/CAE User's Manual, Abaqus Version 6.6 Documentation, Abaqus Inc., Providence, RI, 2006.
   Google Scholar
• V.M.K. Akula, Constitutive modeling of damaged unidirectional composite laminae, . Ph.D. Dissertation, University of Wyoming, Laramie, WY, 2007.
   Google Scholar
• J.H. Lee and C.S. Hong, Refined two-dimensional analysis of cross-ply laminates with transverse cracks based on the assumed crack opening deformation, Compos. Sci. Technol., vol. 46, pp. 157–166, 1993.
   Web of Science ®Google Scholar
• R. Joffe and J. Varna, Analytical modeling of stiffness reduction in symmetric and balanced laminates due to cracks in 90° layers, Compos. Sci. Technol., vol. 59, pp. 1641–1652, 1999.
   Web of Science ®Google Scholar
• S.E. Groves, C.E. Harris, A.L. Highsmith, D.H. Allen, and R.G. Norvell, An experimental and analytical treatment of matrix cracking in cross-ply laminates, Exp. Mech., vol. 27, pp. 73–79, 1987.
   Web of Science ®Google Scholar
• J.S. Mayes and A.C. Hansen, Composite laminate failure analysis using multicontinuum theory, Compos. Sci. Technol., vol. 64, pp. 379–394, 2004.
   Web of Science ®Google Scholar