Analysis on the Deflection of Multi-Layered Ceramic Capacitors Due to High Pressure

References

• Y. Sakabe, Multilayer ceramic capacitors, Curr. Opin. Solid State & Mater. Sci., vol. 2, pp. 584–587, 1997.
   Web of Science ®Google Scholar
• W.G. Jiang, X.Q. Feng, and C. Nan, A three-dimensional theoretical model for estimating the thermal residual stresses in micro multilayer ceramic capacitors, Compos. Sci. Technol., vol. 68, pp. 692–698, 2008.
   Web of Science ®Google Scholar
• R.Z. Zuo, L.T. Li, N.X. Zhang, and Z.L. Gui, Interfacial reaction of Ag/Pd metals with Pb-based relaxor ferroelectrics including additives, Ceram. Intl., vol. 27, pp. 85–89, 2001.
   Web of Science ®Google Scholar
• R.Z. Zuo, L.T. Li, and Z.L. Gui, Relationships between interfacial interaction, electrode formulation and cofiring mismatch of relaxor-based multilayer ceramic devices, J. Mater. Sci.: Mater. Electron., vol. 12, pp. 117–121, 2001.
   Web of Science ®Google Scholar
• R.Z. Zuo, L.T. Li, and Z.L. Gui, Interfacial development and microstructural imperfection of multilayer ceramic chips with Ag/Pd electrodes, Ceram. Intl., vol. 27, pp. 889–893, 2001.
   Web of Science ®Google Scholar
• Y. Nakano, T. Nomura, and T. Takenaka, Residual stress of multilayer ceramic capacitors with Ni-electrodes (Ni-MLCCs), Jpn. J. Appl. Phys., vol. 42, pp. 6041–6044, 2003.
   Web of Science ®Google Scholar
• K. Saito and H. Chazono, Stress and electric field responses of X5R type multilayer ceramic capacitor with Ni internal electrode, Jpn. J. Appl. Phys., vol. 42, pp. 6045–6049, 2003.
   Web of Science ®Google Scholar
• K. Franken, H.R. Maier, K. Prume, and R. Waser, Finite-element analysis of ceramic multilayer capacitors: Failure probability caused by wave soldering and bending loads, J. Am. Ceram. Soc., vol. 83, pp. 1433–1440, 2000.
   Web of Science ®Google Scholar
• K. Prume, K. Franken, U. Bottger, and R. Waser, Modeling and numerical simulation of the electrical, mechanical, and thermal coupled behavior of multilayer capacitors (MLCs), J. Euro. Ceram. Soc., vol. 22, pp. 1285–1296, 2002.
   Web of Science ®Google Scholar
• H. Shin, J.S. Jung, and K.S. Hong, Investigation of useful or deleterious residual thermal stress component to the capacitance of a multilayer ceramic capacitor, Microelec. Eng., vol. 77, pp. 270–276, 2005.
   Web of Science ®Google Scholar
• J.S. Park, S. Kim, H. Shin, H.S. Jung, and K.S. Hong, Residual stress evolution in multilayer ceramic capacitors corresponding to layer increase and its correlation to the dielectric constant, J. Appl. Phys., vol. 97, p. 094504, 2005.
   Google Scholar
• H. Shin, J.S. Park, K.S. Hong, H.S. Jung, J.K. Lee, and K.Y. Rhee, Physical origin of residual thermal stresses in a multilayer ceramic capacitor, J. Appl. Phys., vol. 101, p. 063527, 2007.
   Google Scholar
• Y.I. Shin, K.M. Kang, Y.G. Jung, J.G. Yeo, S.G. Lee, and U. Paik, Internal stresses in BaTiO3/Ni MLCCs, J. Euro. Ceram. Soc., vol. 23, pp. 1427–1434, 2003.
   Web of Science ®Google Scholar
• S.G. Lee, U. Paik, Y.I. Shin, J.W. Kim, and Y.G. Jung, Control of residual stresses with post process in BaTiO3-based Ni-MLCCs, Mater. & Design, vol. 24, pp. 169–176, 2003.
   Web of Science ®Google Scholar
• B. Bhushan and G.B. Agrawal, Stress analysis of nanostructures using a finite element method, Nanotechnology, vol. 13, pp. 515–523, 2002.
   Web of Science ®Google Scholar
• D.W. Kim, J.H. Kang, S.H. Park, H.C. Kim, and Y.G. Jung, Crack formation in MLCCs depending on position with and without post-heat treatment, J. Electroceram., vol. 17, pp. 381–385, 2006.
   Web of Science ®Google Scholar
• S. Timoshenko and S. Woinowsky-Krieger, Theory of Plates and Shells (2nd Ed.), McGraw-Hill, Inc., New York, pp. 259–281, 1959.
   Google Scholar
• O. Adewale, Application of the singularity function method to semi-infinite orthotropic rectangular plates on an elastic foundation, Mech. Sci., vol. 43, pp. 2261–2279, 2001.
   Web of Science ®Google Scholar
• J.S. Arul and C.V. Vaidyanathan, Post critical behaviour of biaxially compressed plates on elastic foundation, Comput. Struct., vol. 54, pp. 239–246, 1995.
   Web of Science ®Google Scholar
• H.S. Shen, Postbuckling of shear deformable laminated plates under biaxial compression and lateral pressure and resting on elastic foundations, Mech. Sci., vol. 42, pp. 1171–1195, 2000.
   Web of Science ®Google Scholar
• T. Horibe and N. Asano, Large deflection analysis of rectangular plates on two-parameter elastic foundation by the boundary strip method, JSME Int. J., . Series A, vol. 44, pp. 483–489, 2001.
   Web of Science ®Google Scholar
• J.L. Bucaille, S. Stauss, Pa Schwaller, and J. Michler, A new technique to determine the elastoplastic properties of thin metallic films using sharp indenters, Thin Solid Films, vol. 44, pp. 239–245, 2004.
   Google Scholar
• G.M. Pharr, W.C. Oliver, and F.R. Brotzen, On the generality of the relationship among contact stiffness, contact area, and elastic modulus during indentation, J. Mater. Res., vol. 7, pp. 613–617, 1992.
   Web of Science ®Google Scholar
• M. Zhao, Y. Xiang, J. Xu, N. Ogasawara, N. Chiba, and X. Chen, Determining mechanical properties of thin films from the loading curve of nanoindentation testing, Thin Solid Films, vol. 516, pp. 7571–7580, 2008.
   Web of Science ®Google Scholar
• K.C. Tang and R.D. Arnell, Determination of coating mechanical properties using spherical indenters, Thin Solid Films, vol. 355–356, pp. 263–269, 1999.
   Web of Science ®Google Scholar
• N.K. Chang, Y.S. Lin, C.Y. Chen, and S.H. Chang, Size effect of indenter on determining modulus of nanowires using nanoindentation technique, Thin Solid Films, vol. 517, pp. 3695–3697, 2009.
   Web of Science ®Google Scholar
• P.L. Guo, Analysis on the deflection of multilayered ceramic capacitors under high temperature and uniform pressure, . M.S. Thesis, National Sun Yat-Sen University, Kaohsiung, Taiwan, 2011.
   Google Scholar
• H.L. Hu, Reliability of evaluation and failure analysis for multilayer ceramic capacitors (MLCCs), . M.S. Thesis, National Cheng Kung University, Taiwan, 2006.
   Google Scholar
• E. Zahavi, The Finite Element Method in Machine Design, Prentice Hall, Englewood Cliffs, NJ, pp. 47–51, 1992.
   Google Scholar