References
- J.M. Whitney and R.J. Nuismer, Uniaxial failure of composite laminated containing stress concentrations, Fract. Mech. Compos., ASTM STP, pp. 117–142, 1975.
- L.W. Byrd and V. Birman, Effect of temperature on stresses and delamination failure of Z-pinned joints, Int. J. Mech. Sci., vol. 48, pp. 938–949, 2006.
- T. De Jong, Stresses around pin-loaded holes in composite materials. In: Mechanics of Composite Materials: Recent Advances, Pergamon Press, New York, pp. 339–353, 1982.
- J.T. Wang, C.G. Lotts, and D.D. Davis, Analysis of bolt-loaded elliptical holes in laminated composite joints, J. Reinforced Plast. Compos., vol. 12, pp. 128–138, 1993.
- J. Kweon, H. Ahn, and J. Choi, A new method to determine the characteristic lengths of composite joints without testing, Compos. Struct., vol. 66, pp. 305–315, 2004.
- S.G. Lekhnitskii, Plates, Translated from the 2nd Russian edition by S.W. Tsai and T. Chevron, Gordon and Breach, London, 1968.
- R.J. Nuismer, Application of the average stress failure criterion: Part II—Compression, J. Compos. Mater., vol. 13, pp. 49–60, 1979.
- J.M. Whitney and R.J. Nuismer, Stress fracture criteria for laminated composites containing stress concentrations, Journal of Composite Materials, vol. 10, pp. 253–265, 1974.
- S.C. Tan, Finite-width correction factor for anisotropic plates containing central opening, J. Compos. Mater., vol. 22, pp. 1080–1097, 1988.
- J. Choi and Y. Chun, Failure load prediction of mechanically fastened composite joints, J. Compos. Mater., vol. 37, no. 24, pp. 2163–2177, 2003.
- F.K. Chang and R.A. Scott, Strength of mechanically fastened composite joints, J. Compos. Mater., vol. 16, pp. 470–494, 1982.
- M.N. Nahas, Survey of failure and post-failure theories of laminated fiber-reinforced composites, J. Compos. Tech. Res., vol. 8, no. 4, pp. 138–153, 1986.
- S.C. Tan, Laminated composites containing an opening elliptical II. Experiments and model modification, J. Compos. Mater., vol. 21, pp. 949–968, 1987.
- O. Aluko, An analytical method to determine compressive characteristic length, ASME Dis. F Early Career J., pp. 6.16.8, 2009.
- R.F. Karlak, Hole effects in a related series of symmetrical laminates. In: Proceedings 4th Joint ASM, Metallurgical Society of the American Mining Society, Metallurgical and Petroleum Engineers, Warrendale, PA, 1979.
- H.J. Konish and J.M. Whitney, Approximate stresses in an orthotropic plate containing a circular hole, J. Compos. Mater., vol. 9, pp. 157–166, 1975.
- O. Aluko, A compact analytical method for stress distribution in composite pinned joints, Ph.D. Thesis, Howard University, Washington, DC, 2007.
- L.J. Hart-Smith, Mechanically fastened joints for advanced composites phenomenological considerations and simple analysis. In: Fibrous Composite in Structural Design, Plenum Press, New York, pp. 543–574, 1980.
- O. Aluko and B.S. Moore, The failure characterization of mechanically fastened composite joints, ASME Dis. F Early Career J., vol. 9, pp. 19–26, 2010.
- K. Zhang and C.E.S. Ueng, Stress around a pin loaded hole in orthotropic plates, J. Compos. Mater., vol. 18, pp. 432–446, 1984.