References
- S.J. Roundy, Energy scavenging for wireless sensor nodes with a focus on vibration to electricity conversion, Ph.D. Thesis, The University of California, Berkeley, Berkeley, CA, 2003.
- S.J. Roundy, On the effectiveness of vibration-based energy harvesting, J. Intell. Mater. Syst. Struct., vol. 16, no. 10, pp. 809–823, 2005.
- E. Hausler, L. Stein, and G. Harbauer, Implantable physiological power supply with PVDF film, Ferroelectrics, vol. 60, no. 1, pp. 277–282, 1984.
- A. Erturk, Electromechanical modeling of piezoelectric energy harvesters, Dissertation, Virginia Polytechnic Institute and State University, Blacksburg, VA, 2009.
- A. Erturk and D.J. Inman, Assumed-modes formulation of piezoelectric energy harvesters: Euler–Bernoulli, Rayleigh and Timoshenko models with axial deformations, Proceedings of the ASME 2010 ESDA 10th Biennial Conference on Engineering Systems, Design and Analysis, Yeditepe University, Istanbul, Turkey, 2010.
- A. Erturk and D.J. Inman, Piezoelectric Energy Harvesting, John Wiley & Sons, New York, NY, 2011
- T.H. Ng and W.H. Liao, 2005, Sensitivity analysis and energy harvesting for a self-powered piezoelectric sensor, J. Intell. Mater. Syst. Struct., vol. 16, no. 10, pp. 785–797, 2005.
- M. Lallart, S.R. Anton, and D.J. Inman, Frequency self-tuning scheme for broadband vibration energy harvesting, J. Intell. Mater. Syst. Struct., vol. 21, no. 9, pp. 897–906, 2010.
- A. Lazarus, O. Thomas, and J.F. Deu, Finite element reduced order models for nonlinear vibration of piezoelectric layered beams with applications to NEMS, Finite Elem. Anal. Des. vol. 49, pp. 51–53, 2012.
- M. Ghayour and M. Jabbari, The effect of support and concentrated mass on the performance of piezoelectric beam actuator and frequencies, 3rd International Conference on Acoustics and Vibration, December 25–26, Tehran, Iran, 2013.
- M. Kogl and M.L. Bucalem, Analysis of smart laminates using piezoelectric MITC plate and shell elements, Comput. Struct., vol. 83, pp. 1163–1153, 2005.
- V. Piefort and A. Preumont, Finite element modeling of smart piezoelectric shell structures, The 5th National Congress on Theoretical and Applied Mechanics, Louvain La-Neuve, 2000.
- C. Bendigeri, R. Tomar, S. Basavaraju, and K. Arasukumar, Detailed formulation and programming method for piezoelectric finite element, Int. J. Pure Appl. Sci. Technol., vol. 7, no. 1, pp. 1–21, 2011.
- G. Sebald, H. Kuwano, and D. Guyomar, Experimental Duffing oscillator for broadband piezoelectric energy harvesting, Smart Mater. Struct., vol. 20, 1–10, 2011.
- A. Erturk and D.J. Inman, Broadband piezoelectric power generation on high-energy orbits of the bistable Duffing oscillator with electromechanical coupling, J. Sound Vib., vol. 330, pp. 2339–2353, 2011.
- M.I. Friswell, S.A. Faruque, O. Bilgen, S. Adhikari, A.W. Lees, and G. Litak, Non-linear piezoelectric vibration energy harvesting from a vertical cantilever beam with tip mass, J. Intell. Mater. Syst. Struct., vol. 23, no. 13, pp. 1505–1521, 2012.
- R.D. Cook, Finite Element Analysis for Stress Analysis, John Wiley & Sons, New York, NY, 1995.
- R.W. Clough and J. Penzien, Dynamics of Structures, John Wiley and Sons, New York, NY, 1975.
- J.N. Reddy, Nonlinear Finite Element Analysis, Oxford University Press, Oxford, UK, 2007.
- M.M. Rodriguez, Analysis of structural damping, Master of Science Program, Lulea University of Technology, Lulea, Sweden, 2006.
- Bruel and Kjaer, Experimental and modal analysis, B&K Sound and Vibration Measurement A/S, Naerum, Denmark, 2003.