References
- H. Presting and U. Konig, Future nanotechnology developments for automotive applications, Mater. Sci. Eng., C, vol. 23, pp. 737–741, 2003.
- R.P. Bustamante, I.E. Guel, W.A. Flores, M.M. Yoshida, P.J. Ferreira, and R. Martínez-Sánchez, Novel Al-matrix nanocomposites reinforced with multi-walled carbon nanotubes, J. Alloys Compd., vol. 450, pp. 323–326, 2008.
- R.S. Rana, R. Purohit, and S. Das, Review of recent studies in Al matrix composites, Int. J. Sci. Eng. Res., vol. 3, pp. 1–16, 2012.
- V.N. Popov, Carbon nanotubes: Properties and application, Mater. Sci. Eng., R., vol. 43, pp. 61–102, 2004.
- S.R. Dong, J.P. Tu, and X.B. Zhang, An investigation of the sliding wear behavior of Cu-matrix composite reinforced by carbon nanotubes, Mater. Sci. Eng., A, vol. 313, pp. 83–87, 2001.
- W.X. Chen, J.P. Tu, L.Y. Wang, H.Y. Gan, Z.D. Xu, and X.B. Zhang, Tribological application of carbon nanotubes in a metal-based composite coating and composites, Carbon, vol. 41, pp. 215–222, 2003.
- R. Pérez-Bustamante, C.D. Gómez-Esparza, I. Estrada-Guel, M. Miki-Yoshida, L. Licea-Jiménez, S.A. Pérez-García, and R. Martínez-Sánchez, Microstructural and mechanical characterization of Al–MWCNT composites produced by mechanical milling, Mater. Sci. Eng., A, vol. 502, pp. 159–163, 2009.
- S.R. Bakshi, A.K. Keshri, and A. Agarwal, A comparison of mechanical and wear properties of plasma sprayed carbon nanotube reinforced aluminum composites at nano and macro scale, Mater. Sci. Eng., A, vol. 528, pp. 3375–3384, 2011.
- S.E. Shin and D.H. Bae, Strengthening behaviour of chopped multi-walled carbon nanotube reinforced aluminum matrix composites, Mater. Charact., vol. 83, pp. 170–177, 2013.
- K. Balani and A. Agarwal, Multiscale wear of plasma-sprayed carbon-nanotube-reinforced aluminum oxide nanocomposite coating, Acta Mater., vol. 56, pp. 5984–5994, 2008.
- T. Laha, Y. Chen, D. Lahiri, and A. Agarwal, Tensile properties of carbon nanotube reinforced aluminum nanocomposite fabricated by plasma spray forming, Composites Part A, vol. 40, pp. 589–594, 2009.
- A.M.K. Esawi, K. Morsi, A. Sayed, A.A. Gawad, and P. Borah, Fabrication and properties of dispersed carbon nanotube–aluminum composites, Mater. Sci. Eng., A, vol. 508, pp. 167–173, 2009.
- A.M.K. Esawi, K. Morsi, A. Sayed, M. Taher, and S. Lanka, Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites, Compos Sci. Technol., vol. 70, pp. 2237–2241, 2010.
- K.T. Kim, S.I. Cha, S.H. Hong, and S.H. Hong, Microstructures and tensile behaviour of carbon nanotube reinforced Cu matrix nanocomposites, Mater. Sci. Eng., A, vol. 430, pp. 27–33, 2006.
- H.J. Choi, S.M. Lee, and D.H. Bae, Wear characteristic of aluminium-based composites containing multi-walled carbon nanotubes, Wear, vol. 270, pp. 12–18, 2010.
- I.Y. Kim, J.H. Lee, G.S. Lee, S.H. Baik, Y.J. Kim, and Y.Z. Lee, Friction and wear characteristics of the carbon nanotube–aluminium composites with different manufacturing conditions, Wear, vol. 267, pp. 593–598, 2009.
- S. Zhou, X. Zhang, Z. Ding, C. Min, G. Xu, and W. Zhu, Fabrication and tribological properties of carbon nanotubes reinforced Al composites prepared by pressureless infiltration technique, Composites Part A, vol. 38, pp. 301–306, 2007.
- A.M. Al-Qutub, A. Khalil, N. Saheb, and A.S. Hakeem, Wear and friction behaviour of Al6061 alloy reinforced with carbon nanotubes, Wear, vol. 29, pp. 7752–761, 2013.
- I. Sridhar and K.R. Narayanan, Processing and characterization of MWCNT reinforced aluminum matrix composites, J. Mater. Sci., vol. 44, pp. 1750–1756, 2009.
- D. Bikiaris, Microstructure and properties of polypropylene/carbon nanotube nanocomposites, Materials, vol. 3, pp. 2884–2946, 2010.
- R. George, K.T. Kashyap, R. Rahul, and S. Yamdagni, Strengthening in carbon nanotube/aluminium (CNT/Al) composites, Scripta Mater., vol. 53, pp. 1159–1163, 2005.
- Z. Zhang and D.L. Chen, Consideration of Orowan strengthening effect in particulate-reinforced metal matrix nanocomposites: A model for predicting their yield strength, Scripta Mater., vol. 54, pp. 1321–1326, 2006.
- H.J. Choi and D. Bae, Strengthening and toughening of aluminum by singlewalled carbon nanotube, Mater. Sci. Eng., A, vol. 528, pp. 2412–2417, 2011.
- H.J. Choi, B.H. Min, J.H. Shin, and D.H. Bae, Strengthening in nanostructured 2024 aluminum alloy and its composites containing carbon nanotubes, Composites Part A, vol. 42, pp. 1438–1444, 2011.
- S.J. Yoo, S.H. Han, and W.J. Kim, Strength and strain hardening of aluminum matrix composites with randomly dispersed nanometer-length fragmented carbon nanotubes, Scripta Mater., vol. 68, pp. 711–714, 2013.
- H.J. Ryu, S.I. Cha, and S.H. Hong, Generalized shear-lag model for load transfer in SiC/Al metal-matrix composites, J. Mater. Res., vol. 18, pp. 2851–2858, 2003.
- D. Lahiri, S.R. Bakshi, A.K. Keshri, and A. Agarwal, Dual strengthening mechanisms induced by carbon nanotubes in roll bonded aluminum composites, Mater. Sci. Eng., A, vol. 523, pp. 263–270, 2009.
- M. Paramsothy, J. Chan, R. Kwok, and M. Gupta, Addition of CNTs to enhance tensile/compressive response of magnesium alloy ZK60A, Composites Part A, vol. 42, pp. 180–188, 2011.
- C.S. Goh, J. Wei, L.C. Lee, and M. Gupta, Ductility improvement and fatigue studies in Mg-CNT nanocomposites, Compos. Sci. Technol., vol. 68, pp. 1432–1439, 2008.
- Y.M. Jen and Y.H. Yang, A study of two-stage cumulative fatigue behaviour for CNT/epoxy composites, Procedia Eng., vol. 2, pp. 2111–2120, 2010.
- Y.M. Jen and Y.C. Wang, Stress concentration effect on the fatigue properties of carbon nanotube/epoxy composites, Composites Part B, vol. 43, pp. 1687–1694, 2012.
- M.R. Loos, J. Yang, D.L. Feke, I. Manas-Zloczower, S. Unal, and U. Younes, Enhancement of fatigue life of polyurethane composites containing carbon nanotubes, Composites Part B, vol. 44, pp. 740–744, 2013.
- N. Yu, Z.H. Zhang, and S.Y. He, Fracture toughness and fatigue life of MWCNT/epoxy composites, Mater. Sci. Eng., A, vol. 494, pp. 380–384, 2008.
- O. Carvalho, G. Miranda, D. Soares, and F.S. Silva, CNT-reinforced aluminium composites: Processing and mechanical properties, Conference of Sociedade Portuguesa de Materiais, March 25–27, Coimbra, Portugal, 2013.
- O. Carvalho, M. Buciumeanu, D. Soares, J. Gomes, and F.S. Silva, Improvement on sliding wear behaviour of Al/cast iron tribopair by CNT's reinforcement of an Al alloy, Tribo. Trans., vol. 58, pp. 643–653, 2015.
- J.K. Shang, W. Yu, and R.O. Ritchie, Role of silicon carbide particles in fatigue crack growth in SiC-particulate-reinforced aluminum alloy composites, Mater. Sci. Eng., A vol. 102, pp. 181–192, 1988.
- T. Threrujirapapong, K. Kondoh, J. Umeda, and H. Imai, Friction and wear behaviour of titanium matrix composite reinforced with carbon nanotubes under dry conditions, Trans. JWRI, vol. 37, pp. 51–56, 2008.