References
- D. Dugdale, Yielding of steel sheets containing slits, J. Mech. Phys. Solids, vol. 8, pp. 100–104, 1960.
- G.I. Barenblatt, The mathematical theory of equilibrium cracks in brittle fracture, Adv. Appl. Mech., vol. 7, pp. 55–129, 1962.
- Z.-H. Jin and C. Sun, Cohesive fracture model based on necking, Int. J. Fract., vol. 134, pp. 91–108, 2005.
- A. Needleman, A continuum model for void nucleation by inclusion debonding, J. Appl. Mech., vol. 54, pp. 525–531, 1987.
- J.S. Langer and A.E. Lobkovsky, Critical examination of cohesive-zone models in the theory of dynamic fracture, J. Mech. Phys. Solids, vol. 46, pp. 1521–1556, 1998.
- M. Omiya and K. Kishimoto, Damage-based cohesive zone model for rate-depend interfacial fracture, Int. J. Damage Mech., vol. 19, pp. 397–420, 2010.
- M.J. Lee, J.M. Lim, and B.C. Lee, Finite element analysis of an adhesive joint using the cohesive zone model and surface pattern design of bonding surfaces, J. Adhes., vol. 89, pp. 205–224, 2013.
- J. Rethore and R. Estevez, Identification of a cohesive zone model from digital images at the micron-scale, J. Mech. Phys. Solids, vol. 61, pp. 1407–1420, 2013.
- Q. Xu and Z. Lu, An elastic-plastic cohesive zone model for metal-ceramic interfaces at finite deformations, Int. J. Plast., vol. 41, pp. 147–164, 2013.
- Y. Xu, X. Li, X. Wang, and L. Liang, Inverse parameter identification of cohesive zone model for simulating mixed-mode crack propagation, Int. J. Solids Struct., vol. 51, pp. 2400–2410, 2014.
- G. Camacho and M. Ortiz, Computational modelling of impact damage in brittle materials, Int. J. Solids Struct., vol. 33, pp. 2899–2938, 1996.
- V. Tvergaard and J.W. Hutchinson, The relation between crack growth resistance and fracture process parameters in elastic-plastic solids, J. Mech. Phys. Solids, vol. 40, pp. 1377–1397, 1992.
- V. Tvergaard, Effect of fibre debonding in a whisker-reinforced metal, Mater. Sci. Eng., A, vol. 125, pp. 203–213, 1990.
- J.T. Wang, Relating cohesive zone model to linear elastic fracture mechanics, National Aeronautics and Space Administration, NASA/TM-2010-216692, Langley Research Center, 2010.
- Y. Shao, H.-P. Zhao, X.-Q. Feng, and H. Gao, Discontinuous crack-bridging model for fracture toughness analysis of nacre, J. Mech. Phys. Solids, vol. 60, pp. 1400–1419, 2012.
- H.-P. Zhao, X.-Q. Feng, S.-W. Yu, W.-Z. Cui, and F.-Z. Zou, Mechanical properties of silkworm cocoons, Polymer, vol. 46, pp. 9192–9201, 2005.
- H.-P. Zhao, X.-Q. Feng, and H. Gao, Ultrasonic technique for extracting nanofibers from nature materials, Appl. Phys. Lett., vol. 90, art. 073112, 2007.
- B. Li, H. Zhao, X. Feng, W. Guo, and S. Shan, Experimental study on the mechanical properties of the horn sheaths from cattle, J. Exp. Biol., vol. 213, pp. 479–486, 2010.
- D.K. Yi, Z.M. Xiao, and S.K. Tan, On the plastic zone size and the crack tip opening displacement of an interface crack between two dissimilar materials, Int. J. Fract., vol. 176, pp. 97–104, 2012.
- D.K. Yi, Z.M. Xiao, and S.K. Tan, An interface crack under biaxial loading with Dugdale plastic zone corrections in layered composite materials, Eng. Fract. Mech., vol. 109, pp. 209–220, 2013.
- M. Fan, D.K. Yi, and Z.M. Xiao, Elastic-plastic stress investigation for an arc-shaped interface crack in composite material, Int. J. Mech. Sci., vol. 83, pp. 104–111, 2014.
- M. Wnuk and J. Legat, Work of fracture and cohesive stress distribution resulting from triaxiality dependent cohesive zone model, Int. J. Fract., vol. 114, pp. 29–46, 2002.
- J. Williams and H. Hadavinia, Analytical solutions for cohesive zone models, J. Mech. Phys. Solids, vol. 50, pp. 809–825, 2002.
- D.A. Hills, Kluwer Academic Publishers, Dordrecht, Boston, 1996.
- F. Erdogan and G. Gupta, On the numerical solution of singular integral equations, Q. Appl. Math., vol. 29, pp. 525–534, 1972.