Interfacial stresses in single-side composite patch-repairs with material tailored bondline

References

• K.B. Katnam, L.F.M. Da Silva, and T.M. Young, Bonded repair of composite aircraft structures: A review of scientific challenges and opportunities, Prog. Aerosp. Sci., vol. 61, pp. 26–42, 2013.
   Web of Science ®Google Scholar
• A. Baker, Bonded composite repair of fatigue-cracked primary aircraft structure, Compos. Struct., vol. 47, no. 1, pp. 431–443, 1999.
   Web of Science ®Google Scholar
• A. Baker, Crack patching: Experimental studies, practical applications. In: Bonded Repair of Aircraft Structures, vol. 7, Springer Science & Business Media, Dordrecht, Netherlands, pp. 107–173, 2012.
   Google Scholar
• M.A. Caminero, M. Lopez-Pedrosa, C. Pinna, and C. Soutis, Damage monitoring and analysis of composite laminates with an open hole and adhesively bonded repairs using digital image correlation, Compos. B: Eng., vol. 53, pp. 76–91, 2013.
   Web of Science ®Google Scholar
• H. Hosseini-Toudeshky and B. Mohammadi, Mixed-mode numerical and experimental fatigue crack growth analyses of thick aluminium panels repaired with composite patches, Compos. Struct., vol. 91, no. 1, pp. 1–8, 2009.
   Web of Science ®Google Scholar
• M. Benachour, N. Benachour, M. Benguediab, and F.Z. Seriari, Prediction of fatigue crack growth of repaired al-alloy structures with double sides, Phys. Proc., vol. 55, pp. 83–89, 2014.
   Google Scholar
• H. S. Kim, M. Cho, J. Lee, A. Deheeger, M. Grédiac, and J.-D. Mathias, Three dimensional stress analysis of a composite patch using stress functions, Interna. J. Mech. Sci., vol. 52, no. 12, pp. 1646–1659, 2010.
   Web of Science ®Google Scholar
• M.N. Charalambides, A.J. Kinloch, and F.L. Matthews, Adhesively-bonded repairs to fibre-composite materials ii. finite element modelling, Compo. A Appl. Sci. Manuf., vol. 29, no. 11, pp. 1383–1396, 1998.
   Web of Science ®Google Scholar
• A. Baker, A. J. Gunnion, and J. Wang, On the certification of bonded repairs to primary composite aircraft components, J. Adhes., vol. 91, no. (1–2), pp. 4–38, 2015.
   Web of Science ®Google Scholar
• G. Pal and S. Kumar, Modeling of carbon nanotubes and carbon nanotube–polymer composites, Prog. Aerosp. Sci., vol. 80, pp. 33–58, 2016.
   Web of Science ®Google Scholar
• S.I. Kundalwal and S. Kumar, Multiscale modeling of stress transfer in continuous microscale fiber reinforced composites with nano-engineered interphase, Mech. Mater., vol. 102, pp. 117–131, 2016.
   Web of Science ®Google Scholar
• P. Upadhyaya and S. Kumar, Micromechanics of stress transfer through the interphase in fiber-reinforced composites, Mech. Mater., vol. 89, pp. 190–201, 2015.
   Web of Science ®Google Scholar
• V. Sabelkin, S. Mall, and J.B. Avram, Fatigue crack growth analysis of stiffened cracked panel repaired with bonded composite patch, Eng. Fract. Mech., vol. 73, no. 11, pp. 1553–1567, 2006.
   Web of Science ®Google Scholar
• R. Jones and W. K. Chiu, Composite repairs to cracks in thick metallic components, Compo. Struct., vol. 44, no. 1, pp. 17–29, 1999.
   Web of Science ®Google Scholar
• R. Jones and D. Peng, Composite repairs to cracked holes under bi-axial loading, Compo. Struct., vol. 57, no. 1, pp. 459–464, 2002.
   Web of Science ®Google Scholar
• R. Jones, K. Krishnapillai, and S. Pitt, Crack patching: predicting fatigue crack growth, Theor. Appl. Fract. Mech., vol. 45, no. 2, pp. 79–91, 2006.
   Web of Science ®Google Scholar
• R. Jones and S. Pitt, Crack patching revisited, Compo. Struct., vol. 76, no. 3, pp. 218–223, 2006.
   Web of Science ®Google Scholar
• L. Gu, A.R.M. Kasavajhala, and S. Zhao, Finite element analysis of cracks in aging aircraft structures with bonded composite-patch repairs, Compos.B Eng., vol. 42, no. 3, pp. 505–510, 2011.
   Web of Science ®Google Scholar
• A. Albedah, F. Benyahia, H. Dinar, and B. B. Bouiadjra, Analytical formulation of the stress intensity factor for crack emanating from central holes and repaired with bonded composite patch in aircraft structures, Compos. B Eng., vol. 45, no. 1, pp. 852–857, 2013.
   Web of Science ®Google Scholar
• Y.W. Kwon and B.L. Hall, Analyses of cracks in thick stiffened plates repaired with single-sided composite patch, Compos. Struct., vol. 119, pp. 727–737, 2015.
   Web of Science ®Google Scholar
• R.D.F. Moreira, M.F.S.F. de Moura, R.L. Fernandes, M.A.V. Figueiredo, and J.P.M. Gonçalves, Numerical and experimental analyses of composite bonded double-strap repairs under high-cycle fatigue, J. Adhes., pp. 1–13, 2016.
   Web of Science ®Google Scholar
• V.S. Bhise, M. Kashfuddoja, and M. Ramji, Optimization of circular composite patch reinforcement on damaged carbon fiber reinforced polymer laminate involving both mechanics-based and genetic algorithm in conjunction with 3D finite element analysis, J. Compos. Mater., vol. 48, no. 22, pp. 2679–2695, 2014.
   Web of Science ®Google Scholar
• K. Madani, S. Touzain, X. Feaugas, M. Benguediab, and M. Ratwani, Numerical analysis for the determination of the stress intensity factors and crack opening displacements in plates repaired with single and double composite patches, Comp. Mater. Sci., vol. 42, no. 3, pp. 385–393, 2008.
   Web of Science ®Google Scholar
• T. Achour, B. Bachir Bouiadjra, and B. Serier, Numerical analysis of the performances of the bonded composite patch for reducing stress concentration and repairing cracks at notch, Comp. Mater. Sci., vol. 28, no. 1, pp. 41–48, 2003.
   Web of Science ®Google Scholar
• A. Chukwujekwu Okafor and H. Bhogapurapu, Design and analysis of adhesively bonded thick composite patch repair of corrosion grind-out and cracks on 2024 t3 clad aluminum aging aircraft structures, Compos. Struct., vol. 76, no. 1, pp. 138–150, 2006.
   Web of Science ®Google Scholar
• D. Ouinas, B.B. Bouiadjra, B. Serier, and M. SaidBekkouche, Comparison of the effectiveness of boron/epoxy and graphite/epoxy patches for repaired cracks emanating from a semicircular notch edge, Compos. Struct., vol. 80, no. 4, pp. 514–522, 2007.
   Web of Science ®Google Scholar
• A. C. Okafor, N. Singh, U.E. Enemuoh, and S.V. Rao, Design, analysis and performance of adhesively bonded composite patch repair of cracked aluminum aircraft panels, Compos. Struct., vol. 71, no. 2, pp. 258–270, 2005.
   Web of Science ®Google Scholar
• J. Wang, A.N. Rider, M. Heller, and R. Kaye, Theoretical and experimental research into optimal edge taper of bonded repair patches subject to fatigue loadings, Int. J Adhes. Adhes., vol. 25, no. 5, pp. 410–426, 2005.
   Web of Science ®Google Scholar
• M. Heller and R. Kaye, Shape optimisation for bonded repairs. In: Advances in the Bonded Composite Repair of Metallic Aircraft Structure, Elsevier Science Ltd, Oxford, UK, pp. 269–315, 2002.
   Google Scholar
• R.H. Kaye and M. Heller, Through-thickness shape optimisation of bonded repairs and lap-joints, Int. J Adhes. Adhes., vol. 22, no. 1, pp. 7–21, 2002.
   Web of Science ®Google Scholar
• S. Kumar, Analysis of tubular adhesive joints with a functionally modulus graded bondline subjected to axial loads, Int. J. Adhes. Adhes., vol. 29, no. 8, pp. 785–795, 2009.
   Web of Science ®Google Scholar
• S. Kumar and J.P. Scanlan, On axisymmetric adhesive joints with graded interface stiffness, Int. J. Adhes. Adhes., vol. 41, pp. 57–72, 2013.
   Web of Science ®Google Scholar
• S. Kumar and M.A. Khan, An elastic solution for adhesive stresses in multi-material cylindrical joints, Int. J. Adhes. Adhes., vol. 64, pp. 142–152, 2016.
   Web of Science ®Google Scholar
• S. Kumar and K.L. Mittal, Advances in Modeling and Design of Adhesively Bonded Systems, John Wiley & Sons, Beverly, MA, 2013.
   Google Scholar
• M.Y. Quek and C.Y. Yue, Axisymmetric stress distribution in the single filament pull-out test, Mater. Sci. Eng. A, vol. 189, no. 1, pp. 105–116, 1994.
   Web of Science ®Google Scholar
• S. Kumar and P.C. Pandey, Behaviour of bi-adhesive joints, J. Adhes. Sci. Technol., vol. 24, no. 7, pp. 1251–1281, 2010.
   Web of Science ®Google Scholar
• L.F.M. da Silva and M.J.C.Q. Lopes, Joint strength optimization by the mixed-adhesive technique, Int. J. Adhes. Adhes., vol. 29, no. 5, pp. 509–514, 2009.
   Web of Science ®Google Scholar
• S. Kawasaki, G. Nakajima, K. Haraga, and C. Sato, Functionally graded adhesive joints bonded by honeymoon adhesion using two types of second generation acrylic adhesives of two components, J. Adhes., vol. 92, no. (7–9), pp. 517–534, 2016.
   Web of Science ®Google Scholar
• S. Kumar, Modeling of cylindrical joints with a functionally graded adhesive interlayer. In: Advances in Modeling and Design of Adhesively Bonded Systems, Scrivener Publishing, Wiley, Beverly, MA, pp. 47–91, 2013.
   Google Scholar
• S. Kumar and M.A. Khan, A shear-lag model for functionally graded adhesive anchors, Int. J. Adhes. Adhes., vol. 68, pp. 317–325, 2016.
   Web of Science ®Google Scholar
• L.F.M. da Silva, A. Öchsner, and R.D. Adams, Handbook of Adhesion Technology, Springer Science & Business Media, Heidelberg, Germany, 2011.
   Google Scholar
• A. Saez, M.P. Ariza, and J. Dominguez, Three-dimensional fracture analysis in transversely isotropic solids, Eng. Anal. Bound. Elem., vol. 20, no. 4, pp. 287–298, 1997.
   Web of Science ®Google Scholar
• J. Liljenhjerte and S. Kumar, Pull-out performance of 3d printed composites with embedded fins on the fiber, MRS Proceedings, vol. 1800, pp. mrss15–2135597. Cambridge Univ Press, 2015.
   Google Scholar
• J. Liljenhjerte, P. Upadhyaya, and S. Kumar, Hyperelastic strain measurements and constitutive parameters identification of 3d printed soft polymers by image processing, Addit. Manuf., vol. 11, pp. 40–48, 2016.
   Google Scholar