References
- R. S. Rowe, “Amplification of stress and displacement in guyed towers,” J. Struct. Div., ASCE, vol. 84, no. ST6, pp. 1821-1–1821-20, 1958.
- F. H. Hull, “Stability analysis of multi-level guyed towers,” J. Struct. Div., ASCE, vol. 88, pp. 61–80, 1962
- J. E. Goldberg and V. J. Meyers, “A Study of guyed towers,” J. Struct. Div., ASCE, vol. 91, pp. 57–76, 1965
- E. G. Odley, “Analysis of high guyed towers,” J. Struct. Div., ASCE,vol. 92, pp. 169–195, 1966
- H. A. Miklofsky and M. G. Abegg, “Design of guyed towers by interaction diagrams,” J. Struct. Div., ASCE, vol. 92, pp. 245–256, 1966
- J. E. Goldberg and T. J. Gaunt, “Stability of guyed towers,” J. Struct. Div, ASCE, vol. 99, pp. 741–756, 1973.
- F. Rosenthal and R. A. Skop, “Guyed towers under arbitrary loads,” J. Struct. Div., ASCE, vol. 106, no. 3, pp. 679–692, 1980.
- N. Kahla, StaticDynamic analysis of guyed towers. Ph.D. thesis, University of Wisconsin, Madison, Wisconsin, 1993.
- S. G. Ekhande and M. K. S. Madagula, “Geometric non-linear analysis of three-dimensional guyed towers,” Comput. Struct., vol. 29,no. 5, pp. 801–806, 1998.
- F. Jenkins, Report on materials of construction used in AircraftAircraft engines. Great Britain Aeronautical Research Committee,London, England, 1920.
- R. M. Waddoups, Advanced composite materials mechanics for the DesignStress analyst. General Dynamics Fort Worth Division Report FZM-4763, Fort Worth, Texas, 1967
- R. Hill, “A Theory of the YieldingPlastic flow of anisotropic metals,” Proceeding of the royal society of London, Series A., vol. 193, pp. 281–297, 1948. doi:10.1098/rspa.1948.0045.
- V. O. Aziz and S. W. Tsai, “Anisotropic strength of composites,” Exp. Mech., vol. 5, pp. 283–288, 1965.
- O. Hoffman, “The brittle strength of orthotropic materials,” J. Compos. Mater., vol. 1, pp. 200–206, 1967. doi:10.1177/002199836700100210.
- S. W. Tsai and E. Wu, “A general theory of strength for anisotropic materials,” J. Compos. Mater., vol. 5, pp. 58–80, 1971. doi:10.1177/002199837100500106.
- ASTM-D3039, “Standard test methods for tensile properties of polymer matrix composite materials,” 2007.
- ASTM-D3410, “Standard test methods for compressive properties of polymer matrix composite materials with unsupported gage section by shear loading,” 2003.
- ASTM-D5379, “Standard test methods for shear properties of composite materials by the v-notched beam method,”2000.
- CSA-S37-01, Antennas, towers and antenna-supporting structures. Canadian Standard Association, Ontario, Canada, 2001.
- ANSYS, ANSYS User's Manual Version 10. Swanson Analysis Systems Inc, Houston, 2005.
- V. I. Burachynsky, Filament winding of long tapered tubes. Ph.D. Dissertation, University of Manitoba, Winnipeg, Manitoba, 2006.
- A. K. Kaw, Mechanics of composite materials. CRC Press, Boca Raton, New York, 1997.
- D. L. Chung, Composite materials: Science and application. Springer-Verlag, London, 2010.
- A. Hopkins and C. Chamis, A Unique set of Micromechanics Equations for High-Temperature Metal Matrix Composite STM STP 964. American Society for TestingMaterials, Philadelphia, pp. 159–176, 1988.
- J. C. Haplin and S. W. Tsai, Effect of Environment Factors on Composite Materials, Air Force Technical Report AFML-TR-67-423, Ohio, 1969.