Minimization of stress state of compound body weakened with cracks

References

• D. Liu, H. Zhou, and N. Zhu, “The analysis of the strengthening of an anisotropy-isotropy compound cylindrical vessel,” Int. J. of Pressure Vessels and Piping, vol. 51, pp. 37–51, 1992. DOI: 10.1016/0308-0161(92)90005-Z.
   Web of Science ®Google Scholar
• D. N. Reshetov, “State and tendency of machine parts development,” Vestnik Mashinostroeniya, vol. 20, no. 10, pp. 11–15, 2000.
   Google Scholar
• T. N. Chakherlou, M. Mirzajanzadeh, and J. Vogwell, “Experimental and numerical investigations into the effect of an interference fit on the fatigue life of double shear lap joints,” Eng Fail Anal., vol. 16, pp. 2066–2080, 2009. DOI: 10.1016/j.engfailanal.2009.01.009.
   Web of Science ®Google Scholar
• D. Croccolo, M. De Agostinis, and N. Vincenzi, “Design and optimization of shaft–hub hybrid joints for lightweight structures: Analytical definition of normalizing parameters,” Int. J. Mech. Sci., vol. 56, pp. 77–85, 2012. DOI: 10.1016/j.ijmecsci.2012.01.007.
   Web of Science ®Google Scholar
• B. Abazadeh, T. N. Chakherlou, and R. C. Alderliesten, “Effect of interference fitting and/or bolt clamping on the fatigue behavior of Al alloy 2024-T3 double shear lap joints in different cyclic load ranges,” Int. J. of Mech. Sci., vol. 72, pp. 2–12, 2013. DOI: 10.1016/j.ijmecsci.2013.03.001.
   Web of Science ®Google Scholar
• S. Itou, “Stress intensity factors around two coaxial cylindrical cracks in composite materials,” Mech. Adv. Mater. Struct., vol. 20, pp. 721–729, 2013. DOI: 10.1080/15376494.2012.676713.
   Web of Science ®Google Scholar
• V. M. Mirsalimov and F. E. Veliyev, “Inverse problem of failure mechanics for a drawing die strengthened with a holder,” Acta Polytechnica Hungarica, vol. 10, pp. 121–138, 2013.
   Web of Science ®Google Scholar
• G. Biron, A. Vadean, and L. Tudose, “Optimal design of interference fit assemblies subjected to fatigue loads,” Struct. Multidiscipl. Optim., vol. 47, pp. 441–451, 2013. DOI: 10.1007/s00158-012-0836-y.
   Web of Science ®Google Scholar
• I. P. Smirnov and I. F. Malitsky, “Optimum diameter size of connections with negative allowance, Engineering. Coll. of Scientific Papers. Kharkiv,” Ukrainian Eng. Pedagogic Acad., vol. 18, pp. 139–144, 2016.
   Google Scholar
• N. L. Pedersen, “On optimization of interference fit assembly,” Struct. Multidisciplin Optim., vol. 54, pp. 349–359, 2016. DOI: 10.1007/s00158-016-1419-0.
   Web of Science ®Google Scholar
• Q. F. Liu, Z. Yan, and W. J. Feng, “Fracture behaviors for a functionally graded superconducting cylinder with a cylindrical crack,” Mech. Adv. Mater. Struct., vol. 24, pp. 176–182, 2017. DOI: 10.1080/15376494.2015.1124954.
   Web of Science ®Google Scholar
• H. Dehmous, F. Duco, M. Karama, and H. Welemane, “Multilevel assessment method for reliable design of composite structures,” Mech. Adv. Mater. Struct., vol. 24, pp. 449–457, 2017. DOI: 10.1080/15376494.2016.1142027.
   Web of Science ®Google Scholar
• I. Sevostianov, V. Verijenko, and M. Kachanov, “Cross-property correlations for short fiber reinforced composites with damage and their experimental verification,” Composites Part B: Engineering, vol. 33, pp. 205–213, 2002. DOI: 10.1016/S1359-8368(02)00008-2.
   Web of Science ®Google Scholar
• V. M. Mirsalimov and F. A. Bakhyshev, “Failure of a composite perforated plate in flexure,” J. of Machi Manufact. Reliab., vol. 34, no. 5, pp. 19–27, 2005.
   Google Scholar
• V. M. Mirsalimov, “Inverse periodic problem of bending for a plate with elastic inclusions,” Mechanics of Solids, vol. 41, no. 3, pp. 137–143, 2006.
   Google Scholar
• V. M. Mirsalimov, “Minimization of stress state of disc fitted on rotating shaft,” J. of Friction and Wear, vol. 27, no. 3, pp. 20–24, 2006.
   Google Scholar
• F. A. Bakhyshov and V. M. Mirsalimov, “Inverse doubly periodic problem of the theory of bending of a plate with elastic inclusions,” J. of Appl. Mech. Tech. Phy., vol. 47, pp. 588–595, 2006. DOI: 10.1007/s10808-006-0093-1.
   Google Scholar
• V. M. Mirsalimov, “Inverse theory of elasticity problem of mounting a disk on a rotating shaft,” J. of Machinery Manufacture and Reliability, vol. 36, pp. 35–38, 2007. DOI: 10.3103/S1052618807010074.
   Google Scholar
• V. M. Mirsalimov, “Optimal design of a compound plate weakened by a periodic crack system,” Mechanics of Solids, vol. 42, no. 2, pp. 231–240, 2007. DOI: 10.3103/S0025654407020082.
   Web of Science ®Google Scholar
• V. M. Mirsalimov, “Inverse problem of fracture mechanics for a disk fitted onto a rotating shaft,” J. of Appl. Mech. Tech. Phys., vol. 50, pp. 712–719, 2009. DOI: 10.1007/s10808-009-0097-8.
   Web of Science ®Google Scholar
• V. M. Mirsalimov, “Inverse problem of fracture mechanics for a compound cylinder,” Mechanics of Solids, vol. 44, pp. 141–148, 2009. DOI: 10.3103/S0025654409010154.
   Web of Science ®Google Scholar
• V. M. Mirsalimov and F. E. Veliev, “Reverse problem of the theory of elasticity for drawing die supported by a cage,” J. of Mach. Manufacture and Reliability, vol. 41, pp. 318–325, 2012. DOI: 10.3103/S1052618812040097.
   Google Scholar
• H. Q. Xue, Q. Tao, and E. Bayraktar, “Effect of interference-fit on fatigue life for composite lap joints,” Adv Mater Res., vol. 939, pp. 39–46, 2014. DOI: 10.4028/www.scientific.net/AMR.939.39.
   Google Scholar
• J. Jiang et al., “Influence of interference fit size on hole deformation and residual stress in hi-lock bolt insertion, Proceedings of the Institution of Mechanical Engineers,” Part C: J of Mechanical Engineering Science, vol. 228, pp. 3296–3305, 2014.
   Web of Science ®Google Scholar
• Y. Bi, J. Jiang, and Y. Ke, “Effect of interference fit size on local stress in single lap bolted joints,” Adv Mech Eng, vol. 7, no. 6, pp. 1–12, 2015. DOI: 10.1177/1687814015590307.
   Web of Science ®Google Scholar
• X. Lü, J. Zhao, L. Hu, and H. Wang, “Effect of interference fits on the fatigue lives of bolted composite joints,” J. of Shanghai Jiaotong University (Science), vol. 21, pp. 648–654, 2016. DOI: 10.1007/s12204-016-1777-1.
   Google Scholar
• V. M. Mirsalimov and V. A. Askarov, “Minimization of fracture parameters of a composite at bending,” Mech. Compos. Mater., vol. 51, pp. 737–744, 2016. DOI: 10.1007/s11029-016-9544-9.
   Web of Science ®Google Scholar
• S.-Y. Kim, B. He, D. (D.-W.) Kim, Ch. S. Shim, and H. Ch. Song, “Bearing strength of interference-fit pin joined glass fiber reinforced plastic composites,” J Compos Mater., 2016. DOI: 10.1177/0021998316636462.
   Google Scholar
• N. I. Muskhelishvili, Some Basic Problem of Mathematical Theory of Elasticity. Amsterdam: Kluwer, 1977.
   Google Scholar
• V. V. Panasyuk, M. P. Savruk, and A. P. Datsyshyn, “A general method of solution of two-dimensional problems in the theory of cracks,” Eng Fract Mech., vol. 9, pp. 481–497, 1977. DOI: 10.1016/0013-7944(77)90040-6.
   Web of Science ®Google Scholar
• E. G. Ladopoulos, Singular Integral Equations: Linear and Non-Linear Theory and its Applications in Science and Engineering. Berlin: Springer Verlag, 2000.
   Google Scholar