References
- S. P. Timoshenko and J. M. Gere, Theory of Elastic Stability, 2nd edition. New York: McGraw-Hill, 1961.
- J. Arbocz and J. Holl, “Collapse of axially compressed cylindrical shells with random imperfections,” AIAA J., vol. 29, no. 22, pp. 47–56, 1991.
- J. F. Jullien and A. Limam, “Effect of openings on the buckling of cylindrical shells subjected to axial compression,” Thin-Walled Struct., vol. 31, no. 1, pp. 187–202, 1998. DOI:10.1016/S0263-8231(98)00003-2.
- M. Rastgar and H. Showkati, “Buckling of cylindrical steel tanks with oblique body imperfection under uniform external pressure,” J. Press. Vessel Technol. Trans., ASME, vol. 139, no. 6, pp. 1–11, 2017. DOI:10.1115/1.4037808.
- M. K. Chryssanthopoulos, A. Y. Elghazouli, and I. E. Esong, “Validation of FE models for buckling analysis of woven GFRP shells,” Compos. Struct., vol. 49, no. 4, pp. 355–367, 2000. DOI:10.1016/S0263-8223(00)00067-2.
- B. Prabu, A. Raviprakash, and A. Venkatraman, “Parametric study on buckling behaviour of dented short carbon steel cylindrical shell subjected to uniform axial compression,” Thin-Walled Struct., vol. 48, pp. 639–649, 2010. DOI:10.1016/j.tws.2010.02.009.
- G. T. Ghanbari, H. Jiao, and D. Holloway, “Experimental study on damaged cylindrical shells under compression,” Thin-Walled Struct., vol. 80, pp. 13–21, 2014. DOI:10.1016/j.tws.2014.02.029.
- G. T. Ghanbari, H. Jiao, and D. Holloway, “Plastic buckling of dented steel circular tubes under axial compression: An experimental study,” Thin-Walled Struct., vol. 92, pp. 48–54, 2015. DOI:10.1016/j.tws.2015.02.018.
- X. Ning and S. Pellegrino, “Experiments on imperfection insensitive axially loaded cylindrical shells,” Int. J. Solids Struct., vol. 115–116, pp. 73–86, 2017. DOI:10.1016/j.ijsolstr.2017.02.028.
- S. Yamada, “Nonlinear analytical confirmation on the application of reduced stiffness method of the buckling of axially compressed cylinders,” Nihon Kikai Gakkai Ronbunshu A Hen/Transactions Japan Soc. Mech. Eng. Part A, vol. 64, no. 619, pp. 765–772, 1998.
- M. Y. Huang, Y. S. Tai, and H. T. Hu, “Dynamic crushing characteristics of high strength steel cylinders with elliptical geometric discontinuities,” Theor. Appl. Fract. Mech., vol. 54, no. 1, pp. 44–53, 2010. DOI:10.1016/j.tafmec.2010.06.014.
- B. H. Jahromi and A. Vaziri, “Instability of cylindrical shells with single and multiple cracks under axial compression,” Thin-Walled Struct., vol. 54, pp. 35–43, 2012. DOI:10.1016/j.tws.2012.01.014.
- S. Shi, Z. Sun, M. Ren, H. Chen, and X. Hu, “Buckling response of advanced grid stiffened carbon-fiber composite cylindrical shells with reinforced cutouts,” Compos. Part B Eng., vol. 44, no. 1, pp. 26–33, 2013. DOI:10.1016/j.compositesb.2012.07.044.
- A. C. Orifici and C. Bisagni, “Perturbation-based imperfection analysis for composite cylindrical shells buckling in compression,” Compos. Struct., vol. 106, pp. 520–528, 2013. DOI:10.1016/j.compstruct.2013.06.028.
- H. Allahbakhsh and M. Shariati, “Instability of cracked CFRP composite cylindrical shells under combined loading,” Thin-Walled Struct., vol. 74, pp. 28–35, 2014. DOI:10.1016/j.tws.2013.09.007.
- M. Shariati and M. M. Rokhi, “Numerical and experimental investigations on buckling of steel cylindrical shells with elliptical cutout subject to axial compression,” Thin-Walled Struct., vol. 46, pp. 1251–1261, 2008. DOI:10.1016/j.tws.2008.02.005.
- H. R. Sankar and V. Parameswaran, “Effect of multiple holes on dynamic buckling of stubby shells: An experimental and numerical investigation,” Int. J. Impact Eng., vol. 96, pp. 129–145, 2016. DOI:10.1016/j.ijimpeng.2016.05.014.
- H. A. Bruck, S. R. McNeill, M. A. Sutton, and W. H. Peters, “Digital image correlation using Newton-Raphson method of partial differential correction,” Exp. Mech., vol. 29, no. 3, pp. 261–267, 1989. DOI:10.1007/BF02321405.
- G. Vendroux and W. G. Knauss, “Submicron deformation field measurements: Part 2. Improved digital image correlation,” Exp. Mech., vol. 38, no. 2, pp. 86–92, 1998. DOI:10.1007/BF02321649.
- L. Muszynski, R. Lopez-Anido, and S. M. Shaler, “Image correlation analysis applied to measurement of shear strains in laminated composites,” Actes du SEM IX Int. Congr. Exp. Mech., Orlando, USA, vol. 5, no. January, pp. 163–166, 2000.
- H. Han, J. Cheng, F. Taheri, and N. Pegg, “Numerical and experimental investigations of the response of aluminum cylinders with a cutout subject to axial compression,” Thin-Walled Struct., vol. 44, pp. 254–270, 2006. DOI:10.1016/j.tws.2005.11.003.