References
- N. Noda, Thermal stress intensity factor for functionally gradient plate with an edge crack, J. Thermal Stresses, vol. 22, no. 4–5, pp. 477–512, 1999.
- P.K. Chauhan and S. Khan, Functionally graded materials: A review on application of finite element method, Int. J. Adv. Product. Mech. Eng., vol. 2, no. 2, pp. 1–6, 2016.
- B.D. Choules and K. Kokini, Architecture of functionally graded ceramic coatings against surface thermal fracture, J. Eng. Mater. Technol., vol. 118, no. 4, pp. 522–528, 1996.
- B.-L. Wang and Z.-H. Tian, Application of finite element-finite difference method to the determination of transient temperature field in functionally graded materials, Finite Element. Anal. Design, vol. 41, pp. 335–349, 2005.
- J.R. Cho and D.Y. Ha, Optimal tailoring of 2D volume-fraction distributions for heat-resisting functionally graded materials using FDM, Comput. Methods Appl. Mech. Eng., vol. 191, pp. 3195–3211, 2002.
- K.V. Karelsky, A.S. Petrosyan, and A.G. Slavin, A finite-difference representation of the Coriolis force in numerical models of Godunov type for rotating shallow water flows, Russian J. Numer. Anal. Math. Modell., vol. 24, no. 3, pp. 229–259, 2009.
- E. Mahdavia, A. Ghasemib, and R. Akbari Alashtic, Elastic-plastic analysis of functionally graded rotating disks with variable thickness and temperature-dependent material properties under mechanical loading and unloading, Aerosp. Sci. Technol., vol. 59, pp. 57–68, 2016.
- A. Najibi and R. Talebitooti, Nonlinear transient thermo-elastic analysis of a 2D-FGM thick hollow finite length cylinder, Composit. Part B: Eng., vol. 111, pp. 211–227, 2017.
- J. Hein, J. Storm, and M. Kuna, Numerical thermal shock analysis of functionally graded and layered materials, Int. J. Thermal Sci., vol. 60, pp. 41–51, 2012.
- M.M. Rokhi and M. Shariati, Implementation of the extended finite element method for coupled dynamic thermoelastic fracture of a functionally graded cracked layer, J. Braz. Soc. Mech. Sci. Eng., vol. 35, pp. 69–81, 2013.
- M. Li, M. Lei, and P.H. Wen, Non-linear analysis of FGM composites by finite block method in cylindrical coordinates, Eng. Struct., vol. 101, pp. 150–162, 2015.
- Y.Y. Zhang, L.C. Guo, F.N. Guo, H.J. Yu, K. Huang, and Y.B. Yu Bo Feng, Thermal shock behavior of a functionally graded material plate with a crack, Appl. Mech. Mater., vol. 275–277, pp. 152–155, 2013.
- J.H. Tian and K. Jiang, Heat conduction investigation of functionally graded material plates under the exponential heat source load, Numer. Heat Transfer, Part A: Appl., vol. 72, no. 2, pp. 141–152, 2017.
- B. Yu, H.-L. Zhou, J. Yan, and Z. Meng, A differential transformation boundary element method for solving transient heat conduction problems in functionally graded materials, Numer. Heat Transfer, Part A: Appl., vol. 70, no. 3, pp. 293–309, 2016.
- S.S. Sahoo, S.K. Panda, T.R. Mahapatra, and C.K. Hirwani, Numerical analysis of transient responses of delaminated layered structure using different mid-plane theories and experimental validation, Iran. J. Sci. Technol. Trans. Mech. Eng., doi:10.1007/s40997-017-0111-3, 2017.
- M.R. Barati and H. Shahverdi, Nonlinear thermal vibration analysis of refined shear deformable FG nanoplates: Two semi-analytical solutions, J. Braz. Soc. Mech. Sci. Eng., vol. 40, pp. 64–79, 2018.
- Y.G. Wang, H.F. Song, W.H. Lin, and L. Xu, Large deflection analysis of functionally graded circular microplates with modified couple stress effect, J. Braz. Soc. Mech. Sci. Eng., vol. 39, pp. 981–991, 2017.
- A.S. Sayyad and Y.M. Ghugal, Modeling and analysis of functionally graded sandwich beams: A review, Mech. Adv. Mater. Struct., doi:10.1080/15376494.2018.1447178, 2018.
- M.D. Demirbas, Thermal stress analysis of functionally graded plates with temperature-dependent material properties using theory of elasticity, Compos. Part B: Eng., vol. 131, pp. 100–124, 2017.
- J. Ma, Z. Zhou, and Z. Cui, Hybrid Laplace transform and finite difference methods for pricing American options under complex models, Comput. Math. Appl., vol. 74, no. 3, pp. 369–384, 2017.
- J. Jaskowiec and S. Milewski, The effective interface approach for coupling of the FE and meshless FD methods and applying essential boundary conditions, Comput. Math. Appl., vol. 70, no. 5, pp. 962–979, 2015.
- J. Jaskowiec and S. Milewski, Coupling finite element method with meshless finite difference method in thermomechanical problems, Comput. Math. Appl., vol. 72, no. 9, pp. 2259–2279, 2016.
- Materials Information Resource MatWeb [Online], 2016. Available from http://www.matweb.com.
- M. Nemat-Alla, Reduction of thermal stresses by developing two-dimensional functionally graded material, Int. J. Solid. Struct., vol. 40, no. 26, pp. 7339–7356, 2003.
- T. Mori and K. Tanaka, Average stress in matrix and average elastic energy of materials with misfittings inclusions, Acta Metal., vol. 21, no. 5, pp. 517–574, 1973.
- B.W. Rosen and Z. Hashin, Effective thermal expansion coefficients and specific heats of composite materials, Int. J. Eng. Sci., vol. 8, no. 2, pp. 157–173, 1970.
- H. Hatta and M. Taya, Effective thermal conductivity of a misoriented short fiber composite, J. Appl. Phys., vol. 58, no. 7, pp. 2478–2486, 1985.
- W.H. Cubberiy and H. Baker, Metal Handbook – Ninth Edition (Volume 2, Properties and Selection: Nonferrous Alloys and Pure Metals), ASM, The Metals Park, Ohio, 1989.
- Y.S. Touloukian, R.W. Powell, C.Y. Ho, and M.C. Nicolaou, Thermophysical Properties of Matter - The TPRC Data Series, Volume 10, Thermal Diffusivity. Plenum Publishing, New York, 1973.
- Matlab. Mathematical software, version 2009a, TheMathWorks, 2009.
- Python programming language, Available from http://www.python.org.
- Abaqus/Explicit (Ver 6.8). Finite element software, version 2009a, SIMULIA Dassault Systèmes, 2008.