References
- A. P. Mouritz, and B. N. Cox, “A mechanistic interpretation of the comparative in-plane mechanical properties of 3D woven, stitched and pinned composites,” Compos. Part A, vol. 41, no. 6, pp. 709–728, 2010.
- A. Yudhanto, N. Watanabe, Y. Iwahori, and H. Hoshi, “Compression properties and damage mechanisms of stitched carbon/epoxy composites,” Compos. Sci. Technol., vol. 86, pp. 52–60, 2013.
- A. Yudhanto, G. Lubineau, I. A. Ventura, N. Watanabe, Y. Iwahori, and H. Hoshi, “Damage characteristics in 3D stitched composites with various stitch parameters under in-plane tension,” Compos. Part A, vol. 71, pp. 17–31, 2015.
- C. Li, X. W. Xu, and H. Wang, “Experiment and analysis on mechanical properties of stitched laminates,” J. Nanjing. U. Aero. Astro., vol. 37, pp. 192–197, 2005.
- A. P. Mouritz, and B. N. Cox, “A mechanistic approach to the properties of stitched laminates,” Compos. Part A, vol. 31, no. 1, pp. 1–27, 2000.
- E. Wu, and J. Wang, “Behavior of stitched laminates under in-plane tensile and transverse impact loading,” J. Compos. Mater., vol. 29, no. 17, pp. 2254–2269, 1995.
- A. Yudhanto, N. Watanabe, Y. Iwahori, and H. Hoshi, “Effect of stitch density on tensile properties and damage mechanisms of stitched carbon/epoxy composites,” Compos. Part B, vol. 46, pp. 151–165, 2013.
- C. Barile, C. Casavola, and C. Pappalettere, “The influence of stitching and unconventional fibers orientation on the tensile properties of CFRP laminates,” Compos. Part B, vol. 110, pp. 248–254, 2017.
- X. N. Sun, D. K. Michael, and L. Y. Tong, “A parametric study on the design of stitched laminated DCB specimens,” Compos. Struct., vol. 75, no. 1–4, pp. 72–78, 2006.
- Y. Iwahori, K. Nakane, and N. Watanabe, “DCB test simulation of stitched CFRP laminates using interlaminar tension test results,” Compos. Sci. Technol., vol. 69, no. 14, pp. 2315–2322, 2009.
- L. K. Jain, and Y. W. Mai, “On the effect of stitching on mode I delamination toughness of laminated composites,” Compos. Sci. Technol., vol. 51, no. 3, pp. 331–345, 1994.
- L. K. Jain, and Y. W. Mai, “Analysis of stitched laminated ENF specimens frontier laminar mode II fracture toughness,” Int. J. Fract., vol. 68, no. 3, pp. 219–244, 1994.
- F. Aymerich, C. Pani, and P. Priolo, “Effect of stitching on the low-velocity impact response of [03/903]S graphite/epoxy laminates,” Compos. Part A, vol. 38, no. 4, pp. 1174–1182, 2007.
- F. Aymerich, C. Pani, and P. Priolo, “Damage response of stitched cross-ply laminates under impact loadings,” Eng. Fract. Mech., vol. 4, pp. 258–273, 2006.
- F. Aymerich, and P. Priolo, “Characterization of fracture modes in stitched and unstitched cross-ply laminates subjected to low-velocity impact and compression after impact loading,” Int. J. Impact. Eng., vol. 35, no. 7, pp. 591–608, 2008.
- L. Francesconi, and F. Aymerich, “Impact damage resistance of thin stitched carbon/epoxy laminates,” J. Phys. Conf. Ser., vol. 628, pp. 012099, 2015.
- K. T. Tan, N. Watanabe, Y. Iwahori, H. Hoshi, and M. Sano, “Interlaminar fracture toughness of vectran-stitched composites-experimental and computational analysis,” J. Compos. Mater., vol. 44, no. 26, pp. 3203–3229, 2010.
- K. T. Tan, N. Watanabe, and Y. Iwahori, “X-ray radiography and micro-computed tomography examination of damage characteristics in stitched composites subjected to impact loading,” Compos. Part B, vol. 42, no. 4, pp. 874–884, 2011.
- K. T. Tan, N. Watanabe, and Y. Iwahori, “Impact damage resistance, response, and mechanisms of laminated composites reinforced by through-thickness stitching,” Int. J. Damage. Mech., vol. 21, no. 1, pp. 51–80, 2012.
- V. Lopresto, V. Melito, C. Leone, and G. Caprino, “Effect of stitches on the impact behavior of graphite/epoxy composites,” Compos. Sci. Technol., vol. 66, no. 2, pp. 206–214, 2006.
- C. J. Mao, X. W. Xu, and D. Zheng, “Experimental investigation of stitched laminates subjected to low-velocity impact and compression after impact,” Acta. Mater. Compos. Sin., vol. 29, pp. 160–166, 2012.
- W. Chen, B. H. Shen, B. B. Wang, and W. P. Liu, “Investigation on the impact damage and post impact compression of stitched composites,” J. Aero. Mater., vol. 17, pp. 49–53, 1997.
- A. P. Mouritz, “Comment on the impact damage tolerance of stitched composites,” J. Mater. Sci. Lett., vol. 22, pp. 519–521, 2003.
- T. Q. Bui, M. N. Nguyen, and C. Zhang, “An efficient meshfree method for vibration analysis of laminated composite plates,” Comput. Mech., vol. 48, no. 2, pp. 175–193, 2011.
- J. L. Curiel-Sosa, and N. Karapurath, “Delamination modelling of GLARE using the extended finite element method,” Compos. Sci. Technol., vol. 72, no. 7, pp. 788–791, 2012.
- T. Q. Bui et al., “Extended isogeometric analysis for dynamic fracture in multiphase piezoelectric/piezomagnetic composites,” Mech. Mater., vol. 97, pp. 135–163, 2016.
- C. Zhang, E. A. Duodu, and J. Gu, “Finite element modeling of damage development in cross-ply composite laminates subjected to low velocity impact,” Compos. Struct., vol. 173, pp. 219–227, 2017.
- B. V. Sankar, and H. S. Zhu, “The effect of stitching on the low-velocity impact response of delaminated composite beams,” Compos. Sci. Technol., vol. 60, no. 14, pp. 2681–2691, 2000.
- L. Francesconi, and F. Aymerich, “Numerical simulation of the effect of stitching on the delamination resistance of laminated composites subjected to low-velocity impact,” Compos. Struct., vol. 159, pp. 110–120, 2017.
- G. Chen, L. J. Gui, Z. N. Li, and C. H. Kou, “Finite element analysis of low-velocity impact damage of stitched laminates,” Acta. Aero. Astro. Sin., vol. 23, no. 9, pp. 958–987, 2004.
- D. Zeng, Y. Yan, L. P. Wang, and B. S. Liu, “Studies on low-velocity impact damage of stitched composites,” Acta. Mater. Compos. Sin., vol. 22, pp. 125–129, 2005.
- Y. L. Wang, X. W. Xu, and C. J. Mao, “Numerical simulation of low-velocity impact damage on stitched composite laminate,” Acta. Mater. Compos. Sin., vol. 31, pp. 715–724, 2014.
- C. H. Huang, and Y. J. Lee, “Experiments and simulation of the static contact crush of composite laminated plates,” Compos. Struct., vol. 61, no. 3, pp. 265–270, 2003.
- P. P. Camanho, and F. L. Matthews, “A progressive damage model for mechanically fastened joints in composite laminates,” J. Compos. Mater., vol. 33, no. 24, pp. 2248–2280, 1999.