The effects of thermal cycle and nanostructure reinforcement on the shear load in adhesively bonded joints

References

• T. Ogasawaraa, Y. Ishidaa, and T. Kasaib, “Mechanical properties of carbon fiber/fullerenedispersed epoxy composites,” Compos. Sci. Technol., vol. 69, pp. 2002–2007, 2009.
   Google Scholar
• N. A. Siddiqui, S. U. Khan, P. C. Ma, C. Y. Li, and J. K. Kim, “Manufacturing and characterization of carbon fibre/epoxy composite prepregs containing carbon nanotubes,” Compos. Part A, vol. 42, no. 10, pp. 1412–1420, 2011.
   Web of Science ®Google Scholar
• A. F. Avila, L. G. Z. Peixoto, A. S. Neto, J. A. Junior, and M. G. R. Carvalho, “Bending investigation on carbon fiber/epoxy composites nano-modified by graphene,” J. Braz. Soc. Mech. Sci. & Eng., vol. 34, no. 3, pp. 269–275, 2012.
   Web of Science ®Google Scholar
• M. A. Rafiee, J. Rafiee, Z. Wang, H. Song, Z. Z. Yu, and N. Koratkar, “Enhanced mechanical properties of nanocomposites at low graphene content,” ACS Nano, vol. 3, no. 12, pp. 3884–3890, 2009.
   PubMed Web of Science ®Google Scholar
• I. Zaman et al., “Epoxy/graphene platelets nanocomposites with two levels of interface strength,” Polymer, vol. 52, no. 7, pp. 1603–1611, 2011.
   Web of Science ®Google Scholar
• X. Zhang et al., “Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide,” ACS Appl. Mater. Interfaces, vol. 4, no. 3, pp. 1543–1552, 2012. − 
   PubMed Web of Science ®Google Scholar
• W. Li, A. Dichiara, and J. Bai, “Carbon nanotube–graphene nanoplatelet hybrids as high-performance multifunctional reinforcements in epoxy composites,” Compos. Sci. Technol., vol. 74, pp. 221–227, 2013.
   Web of Science ®Google Scholar
• G. L. Burkholder, Y. W. Kwon, and R. D. Pollak, “Effect of carbon nanotube reinforcement on fracture strength of composite adhesive joints,” J Mater Sci., vol. 46, no. 10, pp. 3370–3377, 2011.
   Web of Science ®Google Scholar
• A. S. Neto, D. T. Lopes da Cruza, and A. F. Avila, “Nano-modified adhesive by graphene: the single Lap-Joint case,” Mater. Res., vol. 16, no. 3, pp. 592–596, 2013.
   Web of Science ®Google Scholar
• W. Zielecki, A. Kubita, T. Trzepieciński, U. Narkiewicz, and Z. Czech, “Impact of multiwall carbon nanotubes on the fatigue strength of adhesive joints,” Int. J. Adhesion Adhes., vol. 73, pp. 16–21, 2017.
   Web of Science ®Google Scholar
• R. Mactabi, I. D. Rosca, and S. V. Hoa, “Monitoring the integrity of adhesive joints during fatigue loading using carbon nanotubes,” Compos. Sci. Technol., vol. 78, pp. 1–9, 2013.
   Web of Science ®Google Scholar
• E. Sancaktar, and S. Kumar, “Selective use of rubber toughening to optimize lap-joint strength,” J. Adhesion Sci. Technol., vol. 14, no. 10, pp. 1265–1296, 2000.
   Web of Science ®Google Scholar
• R. D. S. G. Campilho, M. D. Banea, J. A. B. P. Neto, and L. F. M. da Silva, “Modelling adhesive joints with cohesive zone models: effect of the cohesive law shape of the adhesive layer,” Int. J. Adhesion Adhes., vol. 44, pp. 48–56, 2013.
   Web of Science ®Google Scholar
• I. Georgiou, H. Hadavinia, A. Ivankovic, A. J. Kinloch, V. Tropsa, and J. G. Williams, “Cohesive zone models and the plastically deforming peel test,” J. Adhes., vol. 79, no. 3, pp. 239–265, 2003.
   Web of Science ®Google Scholar
• W. Li, S. Zhou, Z. Shi, X. Wang, and P. Hu, “Experimental and numerical analysis on fatigue durability of single-lap joints under vibration loads,” J. Adhes., vol. 93, no. 3, pp. 187–203, 2017.
   Web of Science ®Google Scholar
• Q. Xu, G. Nian, Y. Shan, S. Qu, and a H.-X. Peng, “Numerical Investigation on the Loading-Delamination-Unloading Behavior of Adhesive Joints,” Compos. Part A, vol. 90, pp. 45–50, 2016.
   Web of Science ®Google Scholar
• H. Luo, Y. Yan, T. Zhang, and Z. Liang, “Progressive Failure and Experimental Study of Adhesively Bonded Composite Single-Lap Joints Subjected to Axial Tensile Loads,” J. Adhes. Sci. Technol., vol. 30, no. 8, pp. 894–914, 2016.
   Web of Science ®Google Scholar
• T. E. A. Ribeiro, R. D. S. G. Campilho, L. F. M. da Silva, and L. Goglio, “Damage analysis of composite–aluminium adhesively-bonded single-lap joints,” Compos. Struct., vol. 136, pp. 25–33, 2016.
   Web of Science ®Google Scholar
• R. D. S. G. Campilho, A. M. G. Pinto, M. D. Banea, and L. F. M. da Silva, “Optimization study of hybrid spot-welded/bonded single-lap joints,” Int. J. Adhes. Adhes., vol. 37, pp. 86–95, 2012.
   Web of Science ®Google Scholar
• R. D. S. G. Campilho, M. D. Banea, A. M. G. Pinto, L. F. M. da Silva, and A. M. P. de Jesus, “Strength prediction of single- and double-lap joints by standard and extended finite element modelling,” Int. J. Adhes. Adhes., vol. 31, no. 5, pp. 363–372, 2011.
   Web of Science ®Google Scholar
• A. M. G. Pinto, R. D. S. G. Campilho, I. R. Mendes, and A. P. M. Baptista, “Numerical and experimental analysis of balanced and unbalanced adhesive Single-Lap joints between aluminium adherends,” J. Adhes., vol. 90, no. 1, pp. 89–103, 2014.
   Web of Science ®Google Scholar
• J. S. Tomblin, C. Yang, and P. Harter, 2001. “Investigation of Thick Bond Line Adhesive Joint,” Final Report, DOT/FAA/AR–01/33, Washington: U.S. Department of Transportation.
   Google Scholar
• ISO 4587. 2003. Adhesives-determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies.
   Google Scholar
• ASTM D5656 ASTM D5656. 1995 Standart test method for thick-adherend metal lap-shear joints of the stress-strain behaviour of adhesives in shear by tension loading.
   Google Scholar
• ASTM D3165. 2014 Standard test method for strength properties of adhesives in shear by tension loading of single-lap-joint laminated assemblies.
   Google Scholar
• I. A. Akpinar, K. Gültekin, S. Akpinar, H. Akbulut, and A. Özel, “Experimental analysis on the single-lap joints bonded by a nanocomposite adhesives which obtained by adding nanostructures,” Compos. Part B Eng., vol. 110, pp. 420–428, 2017.
   Web of Science ®Google Scholar
• K. Gültekin et al., “The effects of graphene nanostructure reinforcement on the adhesive method and the graphene reinforcement ratio on the failure load in adhesively bonded joints,” Compos. Part B: Eng., vol. 98, pp. 362–369, 2016.
   Web of Science ®Google Scholar
• S. A. Nassar, and K. Sakai, “Effect of cyclic heat, humidity, and joining method on the static and dynamic performance of lightweight multimaterial single-lap joints,” J. Manuf. Sci. Eng., vol. 137, no. 5, pp. 051026–051011, 2015.
   Web of Science ®Google Scholar
• ANSYS, The General Purpose Finite Element Software (Version 16.0), Houston, TX: Swanson Analysis Systems, Inc., 2015.
   Google Scholar
• ISO 10365:1992. Adhesives – Designation of main failure patterns. Publication date: 1992-12, Edition: 1, Number of pages: 3, ICS: 83.180 Adhesives.
   Google Scholar