Experimental study of the impact behavior of repaired thin laminates with double composite patch

References

• K.B. Katnam, L.F.M. DaSilva, and T.M. Young, Bonded repair of composite aircraft structures:a review of scientific challenges and opportunities, Prog. Aerosp. Sci., vol. 61, pp. 26–42, 2013.
   Web of Science ®Google Scholar
• F.H. Darwish and K.N. Shivakumar, Experimental and analytical modeling of scarf repaired composite panels, Mech. Adv. Mater. Struct., vol. 21, no. 3, pp. 207–212, 2014.
   Web of Science ®Google Scholar
• A.A. Baker and R. Jones, Bonded Repair of Aircraft Structures, Martinus Nijhoff Publishers, New York, 1988.
   Google Scholar
• K.B. Zimmerman and D. Liu, An experimental investigation of composite repair, Exp. Mech., vol. 36, no. 2, pp. 142–147, 1996.
   Web of Science ®Google Scholar
• G. Reyes and U. Sharma, Modeling and damage repair of woven thermoplastic composites subjected to low velocity impact, Compos. Struct., vol. 92, no. 2, pp. 523–531, 2010.
   Web of Science ®Google Scholar
• J. Jefferson Andrew, V. Arumugam, K. Saravanakumar, H. N. Dhakal, and C. Santulli, Compression after impact strength of repaired GFRP composite laminates under repeated impact loading, Compos. Struct., vol. 133, pp. 911–920, 2015.
   Web of Science ®Google Scholar
• M. Davies and D. Bond, Principles and practices of adhesive bonded structural joints and repairs, Int. J. Adh., vol. 19, pp. 91–105, 1999.
   Web of Science ®Google Scholar
• E. Sorocinschi, E.S. Rodriguez, V.A. Alvarez, and A. Vazquez, Reparation of composites used in naval industry, J. Reinfor. Plast. Compos., vol. 26, no. 17, pp. 1821–1829, 2007.
   Web of Science ®Google Scholar
• N. F. Lukina et al., Adhesive prepegs and composite materials on their basis, Russ. J. Gen. Chem., vol. 81, no. 5, pp. 1022–1024, 2011.
   Web of Science ®Google Scholar
• B. Bachir Bouiadjra, H. Fekirini, B. Serier, and M. Benguediab, SIF for inclined cracks repaired with double and single composite patch, Mech. Adv. Mater. Struct., vol. 14, no. 4, pp. 303–308, 2007.
   Web of Science ®Google Scholar
• W. Oudad et al., Effect of the humidity absorption by the adhesive on the performances of bonded composite repairs in aircraft structures, Compos. Part B Eng., vol. 43, no. 8, pp. 3419–3424, 2012.
   Web of Science ®Google Scholar
• L.M. Fernández-Cañadas, I. Iváñez, and S. Sanchez-Saez, Influence of the cohesive law shape on the composite adhesively-bonded patch repair behaviour, Compos. Part B Eng., vol. 91, no. 15, pp. 414–421, 2016.
   Google Scholar
• A.B. Harman and C.H. Wang, Improved design methods for scarf repairs to highly strained composite aircraft structure, Compos. Struct., vol. 75, no. 1–4, pp. 132–144, 2006.
   Web of Science ®Google Scholar
• J. Renart, J. Costa, A. Turon, S. Mahdi, and A. Rodríguez-Bellido, Effect of the moisture content of the adherents on the fatigue behavior of composite bonded joints. 16th International Conference on Composite Structures, 2011.
   Google Scholar
• E.M. Moya-Sanz, I. Ivañez, and S.K. Garcia-Castillo, Effect of the geometry in the strength of single-lap adhesive joints of composite laminates under uniaxial tensile load, Int. J. Adh., vol. 72, pp. 23–29, 2017.
   Web of Science ®Google Scholar
• Z.P. Marioli-Riga, G.J. Tsamasphyros, and G.N. Kanderakis, Design of emergency aircraft repairs using composite patches, Mech. Adv. Mater. Struct, vol. 8, no. 3, pp. 199–204, 2001.
   Google Scholar
• S. Sanchez-Saez, E. Barbero, and C. Navarro, Compressive residual strength at low temperatures of composite laminates subjected to low-velocity impacts, Compos. Struct., vol. 85, no. 3, pp. 226–232, 2008.
   Web of Science ®Google Scholar
• C. Atas, Y. Akgun, O. Dagdelen, B. M. Icten, and M. Sarikanat, An experimental investigation on the low velocity impact response of composite plates repaired by VARIM and hand lay-up processes, Compos. Struct, vol. 93, no. 3, pp. 1178–1186, 2011.
   Web of Science ®Google Scholar
• X. Cheng, J. Zhang, J. Bao, B. Zeng, Y. Cheng, and R. Hu, Low-velocity impact performance and effect factor analysis of scarf- repaired composite laminates, Int. J. Impact Eng., vol. 111, pp. 85–93, 2018.
   Web of Science ®Google Scholar
• X. Cheng, X. Du, J. Zhang, J. Zhang, X. Guo, and J. Bao, Effects of stacking sequence and rotation angle of patch on low velocity impact performance of scarf repaired laminates, Compos. Part B Eng., vol. 133, pp. 78–85, 2018.
   Web of Science ®Google Scholar
• G. Balaganesan and V. C. Khan, Energy absorption of repaired composite laminates subjected to impact loading, Compos. Part B Eng., vol. 98, pp. 39–48, 2016.
   Web of Science ®Google Scholar
• A.B. Harman and A.N. Rider, Impact damage tolerance of composite repairs to highly-loaded, high temperature composite structures, Compos. Part A Appl. S, vol. 42, no. 10, pp. 1321–1334, 2011.
   Web of Science ®Google Scholar
• S. Liu, X. Cheng, Y. Xu, J. Bao, and X. Guo, Study on impact performances of scarf-repaired carbon fiber reinforced polymer laminates, J. Reinf. Plast. Comp., vol. 34, no. 1, pp. 60–71, 2015.
   Web of Science ®Google Scholar
• S. Sanchez-Saez, E. Barbero, R. Zaera, and C. Navarro, Compression after impact of thin composite laminates, Compos. Sci. Technol., vol. 65, no. 13, pp. 1911–1919, 2005.
   Web of Science ®Google Scholar
• ASTM D7136/D7136M-15 “Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event,” ASTM International, West Conshohocken, PA, 2015.
   Google Scholar
• I. Ivañez, M.M. Moure, S.K. Garcia-Castillo, and S. Sanchez-Saez, The oblique impact response of composite sandwich plates, Compos. Struct., vol. 133, pp. 1127–1136, 2015.
   Web of Science ®Google Scholar
• G.A. Schoeppner and S. Abrate, Delamination threshold loads for low velocity impact on composite laminates, Compos. Part A Appl. S, vol. 31, no. 9, pp. 903–915, 2000.
   Web of Science ®Google Scholar
• N.F. Rilo and L.M.S. Ferreira, Experimental study of low-velocity impacts on glass-epoxy laminated composite plates, Int. J. Mech. Mater. Des., vol. 4, no. 3, pp. 291–300, 2008.
   Google Scholar
• E. Abi Abdallah, C. Bouvet, S. Rivallant, B. Broll, and J.-J. Barrau, Experimental analysis of damage creation and permanent indentation on highly oriented plates, Compos. Sci. Technol., vol. 69, no. 7–8, pp. 1238–1245, 2009.
   Web of Science ®Google Scholar