References
- P. J. Hazell, Armour. CRC Press, Boca Raton, FL, 2015.
- M. A. Iqbal, K. Senthil, V. Madhu, and N. K. Gupta, Oblique impact on single, layered and spaced mild steel targets by 7.62 AP projectiles, Int. J. Impact Eng., vol. 110, pp. 26–38, 2017. DOI: https://doi.org/10.1016/j.ijimpeng.2017.04.011.
- T. Børvik, L. Olovsson, S. Dey, and M. Langseth, Normal and oblique impact of small arms bullets on AA6082-T4 aluminium protective plates, Int. J. Impact Eng., vol. 38, no. 7, pp. 577–589, 2011. DOI: https://doi.org/10.1016/j.ijimpeng.2011.02.001.
- D. W. Zhou, and W. J. Stronge, Ballistic limit for oblique impact of thin sandwich panels and spaced plates, Int. J. Impact Eng., vol. 35, no. 11, pp. 1339–1354, 2008. DOI: https://doi.org/10.1016/j.ijimpeng.2007.08.004.
- A. H. Baluch, Y. Park, and C. G. Kim, High velocity impact characterization of Al alloys for oblique impacts, Acta Astronaut., vol. 105, no. 1, pp. 128–135, 2014. DOI: https://doi.org/10.1016/j.actaastro.2014.08.014.
- X. Chen, Q. Li, and S. Fan, Oblique perforation of thick metallic plates by rigid projectiles, Acta Mech. Mech. Sin., vol. 22, no. 4, pp. 367–376, 2006. DOI: https://doi.org/10.1007/s10409-006-0015-8.
- M. J. Forrestal, T. Børvik, T. L. Warren, and W. Chen, Perforation of 6082-T651 aluminum plates with 7.62 mm APM2 bullets at normal and oblique impacts, Exp. Mech.., vol. 54, no. 3, pp. 471–481, 2014. DOI: https://doi.org/10.1007/s11340-013-9817-3.
- C. Ji, L. Chen, Y. Long, and Q. Xu, Dynamic behaviors of multi-layered steel targets with air gaps subjected to the impact of EFP simulants, Int. J. Prot. Struct., vol. 6, no. 1, pp. 65–80, 2015. DOI: https://doi.org/10.1260/2041-4196.6.1.65.
- N. K. Gupta, and V. Madhu, Normal and oblique impact of a kinetic energy projectile on mild steel plates, Int. J. Impact Eng., vol. 12, no. 3, pp. 333–343, 1992. DOI: https://doi.org/10.1016/0734-743X(92)90101-X.
- W. Goldsmith, and S. A. Finnegan, Normal and oblique impact of cylindro-conical and cylindrical projectiles on metallic plates, Int. J. Impact Eng., vol. 4, no. 2, pp. 83–105, 1986. DOI: https://doi.org/10.1016/0734-743X(86)90010-2.
- D. E. Tria, and R. Trębiński, Methodology for experimental verification of steel armour impact modelling, Int. J. Impact Eng., vol. 100, pp. 102–116, 2017. DOI: https://doi.org/10.1016/j.ijimpeng.2016.10.011.
- Z. Fawaz, W. Zheng, and K. Behdinan, Numerical simulation of normal and oblique ballistic impact on ceramic composite armours, Compos. Struct., vol. 63, no. 3–4, pp. 387–395, 2004. DOI: https://doi.org/10.1016/S0263-8223(03)00187-9.
- P. J. Hazell, G. Kister, C. Stennett, P. Bourque, and G. Cooper, Normal and oblique penetration of woven CFRP laminates by a high velocity steel sphere, Compos. Part A: Appl. Sci. Manuf., vol. 39, no. 5, pp. 866–874, 2008. DOI: https://doi.org/10.1016/j.compositesa.2008.01.007.
- J. Pernas-Sánchez, J. A. Artero-Guerrero, D. Varas, and J. López-Puente, Experimental analysis of normal and oblique high velocity impacts on carbon/epoxy tape laminates, Compos. Part A: Appl. Sci. Manuf., vol. 60, pp. 24–31, 2014. DOI: https://doi.org/10.1016/j.compositesa.2014.01.006.
- P. Navarro, J. Aubry, S. Marguet, J. F. Ferrero, S. Lemaire, and P. Rauch, Experimental and numerical study of oblique impact on woven composite sandwich structure: Influence of the firing axis orientation, Compos. Struct., vol. 94, no. 6, pp. 1967–1972, 2012. DOI: https://doi.org/10.1016/j.compstruct.2012.02.001.
- A. Serjouei, G. Gour, X. Zhang, S. Idapalapati, and G. E. B. Tan, On improving ballistic limit of bi-layer ceramic–metal armor, Int. J. Impact Eng., vol. 105, pp. 54–67, 2017. DOI: https://doi.org/10.1016/j.ijimpeng.2016.09.015.
- P. J. Hazell, G. J. Appleby-Thomas, and G. Kister, Impact, penetration, and perforation of a bonded carbon-fibre-reinforced plastic composite panel by a high-velocity steel sphere: An experimental study, J. Strain Anal. Eng. Des., vol. 45, no. 6, pp. 439–450, 2010. DOI: https://doi.org/10.1243/03093247JSA604.
- Y. Chen, B. Pang, W. Zheng, and K. Peng, Experimental investigation on normal and oblique ballistic impact behavior of fiber metal laminates, J. Reinf. Plast. Compos., vol. 32, no. 23, pp. 1769–1778, 2013. DOI: https://doi.org/10.1177/0731684413498434.
- D. P. Gonçalves, F. C. L. De Melo, A. N. Klein, and H. A. Al-Qureshi, Analysis and investigation of ballistic impact on ceramic/metal composite armour, Int. J. Mach. Tools Manuf., vol. 44, no. 2–3, pp. 307–316, 2004. DOI: https://doi.org/10.1016/j.ijmachtools.2003.09.005.
- E. S. C. Chin, Army focused research team on functionally graded armor composites, Mater. Sci. Eng. A., vol. 259, no. 2, pp. 155–161, 1999. DOI: https://doi.org/10.1016/S0921-5093(98)00883-1.
- W. A. Gooch, B. H. C. Chen, M. S. Burkins, R. Palicka, J. Rubin, and R. Ravichandran, Development and ballistic testing of a functionally gradient ceramic/metal applique, Mater. Sci. Forum., vol. 308–311, pp. 614–621, 1999. DOI: https://doi.org/10.4028/www.scientific.net/MSF.308-311.614.
- D. S. Kleponis, A. L. Mihalcin, and, and G. L. J. Filbey, Material Design Paradigms for Optimal Functional Gradient Armors, Army Research Laboratory, p. 12, University of Texas, Austin, TX, USA, 2005.
- D. W. Templeton, T. J. Gorsich, and T. J. Holmquist, Computational study of a functionally graded ceramic-metallic armor, 23rd International Symposıum on Ballıstıcs, pp. 1155–1163, Tarragona, Spain, 2007.
- S. T. Quek, V. W. J. Lin, and M. Maalej, Development of functionally-graded cementitious panel against high-velocity small projectile impact, Int. J. Impact Eng., vol. 37, no. 8, pp. 928–941, 2010. DOI: https://doi.org/10.1016/j.ijimpeng.2010.02.002.
- N. Gupta, V. V. Bhanu Prasad, V. Madhu, and B. Basu, Ballistic studies on TiB2-Ti functionally graded armor ceramics, Defence Sci. J., vol. 62, no. 6, pp. 382–389, 2012. DOI: https://doi.org/10.14429/dsj.62.2666.
- M. Aydin, and M. K. Apalak, Experimental damage analysis of Al/SiC functionally graded sandwich plates under ballistic impact, Mater. Sci. Eng., A., vol. 671, pp. 107–117, 2016. DOI: https://doi.org/10.1016/j.msea.2016.06.048.
- C. Y. Huang, and Y. L. Chen, Effect of varied alumina/zirconia content on ballistic performance of a functionally graded material, Int. J. Refract. Met. Hard. Mater., vol. 67, pp. 129–140, 2017. DOI: https://doi.org/10.1016/j.ijrmhm.2017.04.002.
- R. Gunes, K. Arslan, M. K. Apalak, and J. N. Reddy, Ballistic performance of honeycomb sandwich structures reinforced by functionally graded face plates, J. Sandwich Struct Mater., vol. 21, no. 1, pp. 211–229, 2019. DOI: https://doi.org/10.1177/1099636216689462.
- T. Mori, and K. Tanaka, Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metall., vol. 21, no. 5, pp. 571–574, 1973. DOI: https://doi.org/10.1016/0001-6160(73)90064-3.
- Y. Benveniste, A new approach to the application of Mori-Tanaka’s theory in composite materials, Mech. Mater., vol. 6, no. 2, pp. 147–157, 1987. DOI: https://doi.org/10.1016/0167-6636(87)90005-6.
- I. Tamura, Y. Tomota, and H. Ozawa, Srength and ductulity of Fe-Ni-C alloys composed of austenite and martensite with various strength, Proceedings of the 3rd International Conference on the Strength of Metals and Alloys, pp. 611–615. Cambridge, UK, 1973.
- R. A. Larson, A Novel Method for Characterizing the Impact Response of Functionally Graded Plates, Air Force Institute of Technology, Wright-Patterson Air Force Base, OH, 2008.
- M. Aydın, Ballistic Impact Behaviors of Functionally Graded Sandwich Plates, Erciyes University, Kayseri, 2014.
- NATO STANAG 2920, Ballistic Test Method for Personal Armour Materials and Combat Clothing, 2003.
- MIL-DTL-46593B (MR) w/AMENDMENT 1, Detail Specification, Projectile Calibers.22, .30, .50 and 20 mm Fragment-Simulating, 2008.
- N. V. Nechitailo, and R. C. Batra, Penetration of steel plates by long ceramic rods. International Conference on Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena, El Paso, TX, pp. 543–550, 1995.
- C. L. Rao, V. Narayanamurthy, and, and K. R. Y. Simha, Applied Impact Mechanics, John Wiley & Sons Ltd, UK, 2016.
- T. Belytschko, D. P. Flanagan, and J. M. Kennedy, Finite element methods with user-controlled meshes for fluid-structure interaction, Comput. Methods Appl. Mech. Eng., vol. 33, no. 1–3, pp. 669–688, 1982. DOI: https://doi.org/10.1016/0045-7825(82)90127-X.
- S. Sarva, and S. Nemat-Nasser, Dynamic compressive strength of silicon carbide under uniaxial compression, Mater. Sci. Eng., A., vol. 317, no. 1–2, pp. 140–144, 2001. DOI: https://doi.org/10.1016/S0921-5093(01)01172-8.
- K. Arslan, Investigations on Ballistic Performance of Honeycomb Sandwich Structures Reinforced by Functionally Graded Plates, Erciyes University, Kayseri, 2014.