References
- B. Zheng, M. Li, T. Deng, H. Zhou, Z. Huang, H. Zhou, and D. Li, Process-structure-property relationships of thermoformed woven carbon-fiber-reinforced polyether-ether-ketone composites, Polym. Compos., vol. 40, no. 10, pp. 3823–3834, 2019.
- Y.Q. Ma, Y.T. Zhao, Y. Zhang, J. Wang, Y. Chen, K.F. Li, L.Y. Ju, and Y. Yu, Influence of infiltration pressure on the microstructure and properties of 2D-CFRP prepared by the vacuum infiltration hot pressing molding process, Polymers, vol. 11, no. 12, pp. 2014, 2019.
- K. Turan, M. Gur, and M.O. Kaman, Progressive failure analysis of pin-loaded unidirectional carbon-epoxy laminated composites, Mech. Adv. Mater. Struct., vol. 21, no. 2, pp. 98–106, 2014. DOI: https://doi.org/10.1080/15376494.2012.677109.
- J. Bonhomme, J. Vina, A. Arguelles, I. Vina, and V. Mollon, Influence of the matrix toughness in carbon-epoxy composites subjected to delamination under modes I, II, and mixed I/II, Mech. Compos. Mater. Struct., vol. 20, no. 8, pp. 679–686, 2013. DOI: https://doi.org/10.1080/15376494.2012.667866.
- K.N. Antin, A. Laukkanen, T. Andersson, D. Smyl, and P. Vilaca, A multiscale modelling approach for estimating the effect of defects in unidirectional carbon fiber reinforced polymer composites, Materials, vol. 12, no. 12, pp. 1885, 2019. DOI: https://doi.org/10.3390/ma12121885.
- C.B. Xu, Z.B. Yang, S.H. Tian, and X.F. Chen, Lamb wave inspection for composite laminates using a combined method of sparse reconstruction and delay-and-sum, Compos. Struct., vol. 223, pp. 10973, 2019.
- H. Cai, H. Cai, J.J. Ye, Y.K. Wang, F. Jia, Y. Hong, S.H. Tian, and X.F. Chen, Matrix failures effect on damage evolution of particle reinforced composites, Mech. Adv. Mater. Struct., pp. 1–13, 2019. DOI: https://doi.org/10.1080/15376494.2019.1579396.
- P. Cortes, The fracture properties of a fiber metal laminate based on a self-reinforced thermoplastic composite material, Polym. Compos., vol. 35, no. 3, pp. 427–434, 2014. DOI: https://doi.org/10.1002/pc.22677.
- Y.C. Chang, Effect of coulomb friction on the fiber/matrix debonding and matrix cracking in unidirectional fiber-reinforced brittle-matrix composites, Mech. Compos. Mater., vol. 43, no. 2, pp. 113–126, 2007.
- H.M. Mahdi, S.S. Saeed, and S. Mojtaba, A new approach for prediction of elastic modulus of polymer/nanoclay composites by consideringinterfacial debonding: Experimental and numerical investigations, Compos. Sci. Technol., vol. 117, pp. 379–386, 2015.
- P.P. Shi, Singular integral equation method for 2D fracture analysis of orthotropic solids containing doubly periodic strip-like cracks on rectangular lattice arrays under longitudinal shear loading, Appl. Math. Model., vol. 77, pp. 1460–1473, 2020. DOI: https://doi.org/10.1016/j.apm.2019.09.026.
- L. Yang, Z. Wu, D. Gao, and X. Liu, Microscopic damage mechanisms of fiber reinforced composite laminates subjected to low velocity impact, Compos. Mater. Sci., vol. 111, pp. 148–156, 2016. DOI: https://doi.org/10.1016/j.commatsci.2015.09.039.
- E. Tang, J. Wang, Y. Han, and C. Chen, Microscopic damage modes and physical mechanisms of CFRP laminates impacted by ice projectile at high velocity, J. Mater. Res. Technol., vol. 8, no. 6, pp. 5671–5686, 2019. DOI: https://doi.org/10.1016/j.jmrt.2019.09.035.
- D. Song, Y. Li, K. Zhang, C. Hui, P. Liu, and J. Hu, Micromechanical analysis for microscopic damage initiation in fiber/epoxy composite during interference-fit pin installation, Mater. Des., vol. 89, pp. 36–49, 2016. DOI: https://doi.org/10.1016/j.matdes.2015.09.118.
- N. Takeda, Characterization of microscopic damage in composite laminates and real-time monitoring by embedded optical fiber sensors, Int. J. Fatigue., vol. 24, no. 2–4, pp. 281–289, 2002. DOI: https://doi.org/10.1016/S0142-1123(01)00083-4.
- G. Jeong, J.H. Lim, C. Choi, and S.W. Kim, A virtual experimental approach to evaluate transverse damage behavior of a unidirectional composite considering noncircular fiber cross-sections, Compos. Struct., vol. 228, no. 15, pp. 111369, 2019. DOI: https://doi.org/10.1016/j.compstruct.2019.111369.
- A.Y. Elruby and S. Nakhla, Strain energy density based damage initiation in heavily cross-linked epoxy using XFEM, Theor. Appl. Fract. Mech., vol. 103, pp. 102254, 2019. DOI: https://doi.org/10.1016/j.tafmec.2019.102254.
- J. Zhi, L. Zhao, J. Zhang, and Z. Liu, A numerical method for simulating the microscopic damage evolution in composites under uniaxial transverse tension, Appl. Compos. Mater., vol. 23, no. 3, pp. 255–269, 2016. DOI: https://doi.org/10.1007/s10443-015-9459-y.
- X. Xu, R. Augello, and H. Yang, The generation and validation of a CUF-based FEA model with laser-based experiments, Mech. Adv. Mater. Struct., pp. 1–8, 2019. DOI: https://doi.org/10.1080/15376494.2019.1697473.
- H. Yang, X. Xu, W. Xu, and I. Neumann, Terrestrial laser scanning-based deformation analysis for arch and beam structures, IEEE Sens. J., vol. 17, pp. 4605–4611, 2017.
- X. Xu, B. Johannes, H. Yang, and N. Ingo, TLS-based composite structure deformation analysis validated with laser tracker, Compos. Struct., vol. 202, pp. 60–65, 2018. DOI: https://doi.org/10.1016/j.compstruct.2017.10.015.
- Z.J. Wang, Z.Y. Wang, B.W. Xiong, C.C. Cai, Z.F. Xu, and H. Yu, Micromechanics analysis on the microscopic damage mechanism and mechanical behavior of graphite fiber-reinforced aluminum composites under transverse tension loading, J. Alloys. Compd., vol. 815, pp. 152459, 2020. DOI: https://doi.org/10.1016/j.jallcom.2019.152459.
- D. Zhang, X.T. Zheng, and T.C. Wu, Damage characteristics of open-hole laminated composites subjected to longitudinal loads, Compos. Struct., vol. 230, pp. 111474, 2019. DOI: https://doi.org/10.1016/j.compstruct.2019.111474.
- J.J. Ye, C.C. Chu, H. Cai, X.N. Hou, B.Q. Shi, S.H. Tian, X.F. Chen, J.Q. Ye, A multi-scale model for studying failure mechanisms of composite wind turbine blades, Compos. Struct., vol. 212, pp. 220–229, 2019. DOI: https://doi.org/10.1016/j.compstruct.2019.01.031.
- J.J. Ye, C.C. Chu, H. Cai, Y.K. Wang, X.J. Qiao, Z. Zhai, and X.F. Chen, A multi-scale modeling scheme for damage analysis of composite structures based on the high-fidelity generalized method of cells, Compos. Struct., vol. 206, pp. 42–53, 2018. DOI: https://doi.org/10.1016/j.compstruct.2018.07.121.
- Y.Q. Ma, J. Wang, Y. Shi, W. Xu, Y.T. Li, X.M. Liu, and Y. Zhang, Influence of curing process on microstructure and bending strength of 2D-T700/E44 composites, Plast. Rubber. Compos., pp. 1–9, 2019. DOI: https://doi.org/10.1080/14658011.2019.1696499.
- J.J. Ye, Y.W. Wang, Z.W. Li, M. Saafi, F. Jia, B. Huang, and J.Q. Ye, Failure analysis of fiber-reinforced composites subjected to coupled thermo-mechanical loading, Compos. Struct., vol. 235, pp. 111756, 2020. DOI: https://doi.org/10.1016/j.compstruct.2019.111756.
- H. Memarianfard and R.A. Turusov, Multiscale analysis of the residual stresses occurring during curing and cooling of thick-wall cross-ply filament-wound cylinders, Mech. Compos. Mater., vol. 53, no. 5, pp. 675–684, 2017. DOI: https://doi.org/10.1007/s11029-017-9695-3.
- M. Chen, D. Zhang, and J. Gong, Predictions of transverse thermal conductivities for plain weave ceramic matrix composites under in-plane loading, Compos. Struct., vol. 202, pp. 759–767, 2018. DOI: https://doi.org/10.1016/j.compstruct.2018.04.004.
- C. Wallner, S.F.M. Almeida, and C. Kassapoglou, Novel criteria for strength predictions of open-hole composite laminates for preliminary design, Compos. Struct., vol. 229, pp. 1–11, 2019.
- D. Zhang and D.R. Hayhurst, Prediction of stress-strain and fracture behaviour of an 8-harness satin weave ceramic matrix composite, Int. J. Solids. Struct., vol. 51, pp. 21–22, 2014.
- Y. Bansal and M.J. Pindera, Efficient reformulation of the thermoelastic higher-order theory for functionally graded materials, J. Therm. Stresses, vol. 26, no. 11–12, pp. 1055–1092, 2003. DOI: https://doi.org/10.1080/714050872.
- Y. Bansal and M.J. Pindera, Finite-volume direct averaging micromechanics of heterogeneous materials with elastic-plastic phases, Int. J. Plast., vol. 22, no. 5, pp. 775–825, 2006. DOI: https://doi.org/10.1016/j.ijplas.2005.04.012.
- M. Gattu, H. Khatam, and A.S. Drago, M.J. Pindera. Parametric finite-volume micromechanics of uniaxial continuously-reinforced periodic materials with elastic phases, J. Eng. Mater. Technol., vol. 103, pp. 1–15, 2008.
- Y. Bansal and M.J. Pindera, Parametric finite-volume micromechanics of periodic materials with elastoplastic phases, Int. J. Plast., vol. 25, pp. 1386–1411, 2009. DOI: https://doi.org/10.1016/j.ijplas.2008.09.003.
- D.H. Yang, Z.B. Yang, Z. Zhai, and X.F. Chen, Homogenization and localization of ratcheting behavior of composite materials and structures with the thermal residual stress effect, Materials, vol. 12, no. 18, pp. 3048–3020, 2019. DOI: https://doi.org/10.3390/ma12183048.
- J.J. Ye, Y. Hong, H. Cai, Y.K. Wang, Z. Zhai, and B.Q. Shi, A new three-dimensional parametric FVDAM for investigating the effective elastic moduli of particle-reinforced composites with interphase, Mech. Adv. Mater. Struct., vol. 26, no. 22, pp. 1870–1880, 2019. DOI: https://doi.org/10.1080/15376494.2018.1452321.
- Q. Chen, G.N. Wang, X.F. Chen, and J. Geng, Finite-volume homogenization of elastic/viscoelastic periodic materials, Compos. Struct., vol. 182, pp. 457–470, 2017. DOI: https://doi.org/10.1016/j.compstruct.2017.09.044.
- Z.W. Tang, and B.M. Zhang, Prediction of biaxial failure envelopes for composite laminates based on generalized method of cells, Compos. B, vol. 43, no. 3, pp. 914–925, 2012. DOI: https://doi.org/10.1016/j.compositesb.2012.01.003.
- R.K. Goldberg, G.D. Roberts, and A. Gilat, Implementation of an associative flow rule including hydrostatic stress effects into the high strain rate deformation analysis of polymer matrix composites, J. Aerosp. Eng., vol. 18, no. 1, pp. 18–27, 2005. DOI: https://doi.org/10.1061/(ASCE)0893-1321(2005)18:1(18).
- R.K. Goldberg, G.D. Roberts, and A. Gilat, Incorporation of mean stress effects into the micromechanical analysis of the high strain rate response of polymer matrix composites, Compos. B, vol. 34, no. 2, pp. 151–165, 2003. DOI: https://doi.org/10.1016/S1359-8368(02)00081-1.
- Q. Chen and G. Wang, Computationally-efficient homogenization and localization of unidirectional piezoelectric composites with partially cracked interface, Compos. Struct., vol. 232, pp. 111452, 2020. DOI: https://doi.org/10.1016/j.compstruct.2019.111452.