References
- D.P. Cole, J.C. Riddick, H.M. Iftekhar Jaim, K.E. Strawhecker, and N.E. Zander, Interfacial mechanical behavior of 3D printed ABS, J. Appl. Polym. Sci., vol. 133, no. 30, pp. 1–12, 2016. DOI: https://doi.org/10.1002/app.43671.
- A. Boschetto and L. Bottini, Accuracy prediction in fused deposition modeling, The International Journal of Advanced Manufacturing Technology, vol. 73, pp. 913–928, 2014. DOI: https://doi.org/10.1007/s00170-014-5886-4.
- A.R. Torrado, et al., Characterizing the effect of additives to ABS on the mechanical property anisotropy of specimens fabricated by material extrusion 3D printing, Addit. Manuf., vol. 6, pp. 16–29, 2015. DOI: https://doi.org/10.1016/j.addma.2015.02.001.
- Z. Zhu, V. Dhokia, and S.T. Newman, Application of a hybrid process for high precision manufacture of difficult to machine prismatic parts, The International Journal of Advanced Manufacturing Technology, vol. 74, pp. 1115–1132, 2014. DOI: https://doi.org/10.1007/s00170-014-6053-7.
- B. Brenken, E. Barocio, A. Favaloro, V. Kunc, and R.B. Pipes, Fused filament fabrication of fiber-reinforced polymers: a review, Addit. Manuf., vol. 21, pp. 1–16, 2018. DOI: https://doi.org/10.1016/j.addma.2018.01.002.
- A. Uriondo, M. Esperon-Miguez, and S. Perinpanayagam, The present and future of additive manufacturing in the aerospace sector: a review of important aspects, Proc. Inst. Mech. Eng. Part G J. Aerosp. Eng., vol. 229, no. 11, pp. 2132–2147, 2015. DOI: https://doi.org/10.1177/0954410014568797.
- H. Klippstein, A. Diaz De Cerio Sanchez, H. Hassanin, Y. Zweiri, and L. Seneviratne, Fused deposition modeling for unmanned aerial vehicles (UAVs): a review, Adv. Eng. Mater., vol. 20, no. 2, pp. 1700552–1700517, 2018. DOI: https://doi.org/10.1002/adem.201800290.
- M. Schmid, F. Wollecke, and G. Levy, Long-term durability of SLS polymer components under automotive application environment. in ETH Zurich, 2012. DOI: https://doi.org/10.3929/ETHZ-B-000225616.
- T.M. Rankin, et al., Three-dimensional printing surgical instruments: are we there yet?, J. Surg. Res., vol. 189, no. 2, pp. 193–197, 2014. DOI: https://doi.org/10.1016/j.jss.2014.02.020.
- V. Dikshit, et al., Investigation of quasi-static indentation response of inkjet printed sandwich structures under variousindenter geometries, Materials (Basel), vol. 10, no. 3, pp. 290, 2017. DOI: https://doi.org/10.3390/ma10030290.
- V. Dikshit, et al., Investigation of out of plane compressive strength of 3D printed sandwich composites, IOP Conf. Ser. Mater. Sci. Eng., vol. 139, pp. 12–17, 2016.
- Y.L. Yap, and W.Y. Yeong, Shape recovery effect of 3D printed polymeric honeycomb. Virtual Phys. Prototyp., vol. 10, pp. 91–99, 2015. DOI: https://doi.org/10.1080/17452759.2015.1060350.
- M.E. Foley, and D.C. Hart, Guidelines for developing and inserting material properties into the code 65 composite material database. West Bethesda, MD: Naval Surface Warfare Center. Carderock Division, 2011.
- W. Zhong, F. Li, Z. Zhang, L. Song, and Z. Li, Short fiber reinforced composites for fused deposition modeling, Mater. Sci. Eng. A., vol. 301, no. 2, pp. 125–130, 2001. DOI: https://doi.org/10.1016/S0921-5093(00)01810-4.
- Z. Weng, J. Wang, T. Senthil, and L. Wu, Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing, Mater. Des., vol. 102, pp. 276–283, 2016. DOI: https://doi.org/10.1016/j.matdes.2016.04.045.
- N. Li, Y. Li, and S. Liu, Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing, J. Mater. Process. Technol., vol. 238, pp. 218–225, 2016. DOI: https://doi.org/10.1016/j.jmatprotec.2016.07.025.
- R.W. Gray, D.G. Baird, and J. Helge Bøhn, Effects of processing conditions on short TLCP fiber reinforced FDM parts, Rapid Prototyp. J., vol. 4, no. 1, pp. 14–25, 1998. DOI: https://doi.org/10.1108/13552549810197514.
- U. Kalsoom, P.N. Nesterenko, and B. Paull, Recent developments in 3D printable composite materials, RSC Adv., vol. 6, no. 65, pp. 60355–60371, 2016. DOI: https://doi.org/10.1039/C6RA11334F.
- A. Bellini and S. Güçeri, Mechanical characterization of parts fabricated using fused deposition modeling, Rapid Prototyp. J., vol. 9, no. 4, pp. 252–264, 2003. DOI: https://doi.org/10.1108/13552540310489631.
- J.F. Rodríguez, J.P. Thomas, J.E. Renaud, J.P. Thomas, and J.E. Renaud, Mechanical behavior of acrylonitrile butadiene styrene (ABS) fused deposition materials. Experimental investigation. Rapid Prototyp. J., vol. 7, pp. 148–158, 2001. DOI: https://doi.org/10.1108/13552540110395547.
- B.N. Turner and S.A. Gold, A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness, Rapid Prototyp. J., vol. 21, no. 3, pp. 250–261, 2015. DOI: https://doi.org/10.1108/RPJ-02-2013-0017.
- F. Ning, W. Cong, J. Qiu, J. Wei, and S. Wang, Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling, Compos. Part B Eng., vol. 80, pp. 369–378, 2015. DOI: https://doi.org/10.1016/j.compositesb.2015.06.013.
- S. N. A. M. Halidi and J. Abdullah, Moisture and humidity effects on the ABS used in fused deposition modeling machine, Adv Mater Res., vol. 576, pp. 641–644, 2012. DOI: https://doi.org/10.4028/www.scientific.net/AMR.576.641.
- E. Kim, Y.J. Shin, and S.H. Ahn, The effects of moisture and temperature on the mechanical properties of additive manufacturing components: Fused deposition modeling, Rapid Prototyp. J., vol. 22, no. 6, pp. 887–894, 2016. DOI: https://doi.org/10.1108/RPJ-08-2015-0095.
- A. Dasari, Z.Z. Yu, G.P. Cai, and Y.W. Mai, Recent developments in the fire retardancy of polymeric materials, Prog. Polym. Sci., vol. 38, no. 9, pp. 1357–1387, 2013. DOI: https://doi.org/10.1016/j.progpolymsci.2013.06.006.
- Y. Li and H. Shimizu, Improvement in toughness of poly(l-lactide) (PLLA) through reactive blending with acrylonitrile-butadiene-styrene copolymer (ABS): Morphology and properties, Eur. Polym. J., vol. 45, no. 3, pp. 738–746, 2009. DOI: https://doi.org/10.1016/j.eurpolymj.2008.12.010.
- W.H. Ferrell, J. Clement, and S. TerMaath, Uniaxial tensile testing standardization for the qualification of fiber reinforced plastics for fused filament fabrication, Mech. Adv. Mater. Struct., pp. 1–20, 2019. DOI: https://doi.org/10.1080/15376494.2019.1660438.
- ASTM D638-14. Standard Test Method for Tensile Properties of Plastics, ASTM International, West Conshohocken, PA, 2014. DOI: https://doi.org/10.1520/D0638-14.1. www.astm.org.
- ASTM D7028-07. Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA), ASTM International, West Conshohocken, PA, 2015. DOI: https://doi.org/10.1520/D7028-07R15. www.astm.org.
- L.J. Love, et al., The importance of carbon fiber to polymer additive manufacturing, J. Mater. Res., vol. 29, no. 17, pp. 1893–1898, 2014. DOI: https://doi.org/10.1557/jmr.2014.212.
- X. Xu, J. Bureick, H. Yang, and I. Neumann, TLS-based composite structure deformation analysis validated with laser tracker, Compos. Struct., vol. 202, pp. 60–65, 2018. DOI: https://doi.org/10.1016/j.compstruct.2017.10.015.
- H. Yang, X. Xu, W. Xu, and I. Neumann, Terrestrial laser scanning-based deformation analysis for arch and beam structures, IEEE Sens., vol. 17, pp. 4605–4611, 2017.
- H. Yang, X. Xu, and I. Neumann, Optimal finite element model with response surface methodology for concrete structures based on terrestrial laser scanning technology, Compos. Struct., vol. 183, pp. 2–6, 2018. DOI: https://doi.org/10.1016/j.compstruct.2016.11.012.
- H. Yang, M. Omidalizarandi, X. Xu, and I. Neumann, Terrestrial laser scanning technology for deformation monitoring and surface modeling of arch structures, Compos. Struct., vol. 169, pp. 173–179, 2017. DOI: https://doi.org/10.1016/j.compstruct.2016.10.095.
- H. Yang, X. Xu, B. Kargoll, and I. Neumann, An automatic and intelligent optimal surface modeling method for composite tunnel structures, Compos. Struct., vol. 208, pp. 702–710, 2019. DOI: https://doi.org/10.1016/j.compstruct.2018.09.082.
- X. Xu, H. Yang, Y. Zhang, and I. Neumann, Intelligent 3D data extraction method for deformation analysis of composite structures, Compos. Struct., vol. 203, pp. 254–258, 2018. DOI: https://doi.org/10.1016/j.compstruct.2018.07.003.
- X. Xu, H. Yang, and I. Nuemann, A feature extraction method for deformation analysis of large-scale composite structures based on TLS measurement, Compos. Struct., vol. 184, pp. 591–596, 2018. DOI: https://doi.org/10.1016/j.compstruct.2017.09.087.
- H. Yang and X. Xu, Multi-sensor technology for B-spline modelling and deformation analysis of composite structures, Compos. Struct., vol. 224, pp. 111000, 2019. DOI: https://doi.org/10.1016/j.compstruct.2019.111000.
- X. Xu, H. Yang, R. Augello, and E. Carrera, Optimized free-form surface modeling of point clouds from laser-based measurement, Mech. Adv. Mater. Struct., pp. 1–9, 2019. DOI: https://doi.org/10.1080/15376494.2019.1688435.
- X. Xu, R. Augello, and H. Yang, The generation and validation of a CUF-based FEA model with laser-based experiments, Mech. Adv. Mater. Struct., pp. 1–8, 2019. DOI: https://doi.org/10.1080/15376494.2019.1697473.