References
- W. Abramowicz, Thin-walled structures as impact energy absorbers, Thin-Walled Struct., vol. 41, no. 2–3, pp. 91–107, 2003. DOI: https://doi.org/10.1016/S0263-8231(02)00082-4.
- A. Rahi, Experimental and crash-worthiness optimization of end-capped conical tubes under quasi-static and dynamic loading, Mech. Adv. Mater. Struct., vol. 26, no. 17, pp. 1437–1446, 2019. DOI: https://doi.org/10.1080/15376494.2018.1432815.
- H. P. Han, F. Taheri, and N. Pegg, Crushing behaviors and energy absorption efficiency of hybrid pultruded and ±45° braided tubes, Mech. Adv. Mater. Struct., vol. 18, no. 4, pp. 287–300, 2011. DOI: https://doi.org/10.1080/15376494.2010.506103.
- A. Asanjarani, A. Mahdian, and S. H. Dibajian, Comparative analysis of energy absorption behavior of tapered and grooved thin-walled tubes with the various geometry of the cross section, Mech. Adv. Mater. Struct., pp. 1–12, 2018. DOI: https://doi.org/10.1080/15376494.2018.1488311.
- N. Jones, Structural Impact, Cambridge University Press, Cambridge, 2011.
- G. X. Lu and T. X. Yu, Energy Absorption of Structures and Materials, CRC Press, Boca Raton, Cambridge, 2003.
- X. M. Qiu and T. X. Yu, Some topics in recent advances and applications of structural impact dynamics, Appl. Mech. Rev., vol. 64, no. 3, pp. 030801–308012, 2011.
- A. Baroutaji, M. Sajjia, and A. G. Olabi, On the crashworthiness performance of thin-walled energy absorbers: Recent advances and future developments, Thin-Walled Struct., vol. 118, pp. 137–163, 2017. DOI: https://doi.org/10.1016/j.tws.2017.05.018.
- T. X. Yu, Y. F. Xiang, M. Wang, and L. M. Yang, Key performance indicators of tubes used as energy absorbers, Key Eng. Mater., vol. 626, pp. 155–161, 2014.
- Y. F. Xiang, T. X. Yu, and L. M. Yang, Comparative analysis of energy absorption capacity of polygonal tubes, multi-cell tubes and honeycombs by utilizing key performance indicators, Mater. Des., vol. 89, pp. 689–696, 2016. DOI: https://doi.org/10.1016/j.matdes.2015.10.004.
- K. R. F. Andrews, G. L. England, and E. Ghani, Classification of the axial collapse of cylindrical tubes under quasi-static loading, Int. J. Mech. Sci., vol. 25, no. 9–10, pp. 687–696, 1983. DOI: https://doi.org/10.1016/0020-7403(83)90076-0.
- J. M. Alexander, An approximate analysis of collapse of thin-walled cylindrical shells under axial loading, Q. J. Mech. Appl. Math., vol. 13, no. 1, pp. 10–10, 1960. DOI: https://doi.org/10.1093/qjmam/13.1.10.
- T. Wierzbicki, S. U. Bhat, W. Abramowicz, and D. Brodkin, Alexander revisited-A two folding elements model of progressive crushing of tubes, Int. J. Solids Struct., vol. 29, no. 24, pp. 3269–3288, 1992. DOI: https://doi.org/10.1016/0020-7683(92)90040-Z.
- A. A. Singace, H. Elsobky, and T. Y. Reddy, On the eccentricity factor in the progressive crushing of tubes, Int. J. Solids Struct., vol. 32, no. 24, pp. 3589–3602, 1995. DOI: https://doi.org/10.1016/0020-7683(95)00020-B.
- A. A. Singace and H. Elsobky, Further experimental investigation on the eccentricity factor in the progressive crushing of tubes, Int. J. Solids Struct., vol. 33, no. 24, pp. 3517–3538, 1996. DOI: https://doi.org/10.1016/0020-7683(95)00195-6.
- A. U. Al-Saadi, T. Aravinthan, and W. Lokuge, Crushing response of composite corrugated tubes to quasi-static axial loading, Compos. Struct., vol. 66, pp. 665–671, 2004.
- Z. F. Liu, W. Q. Hao, J. M. Xie, J. S. Lu, R. Huang, and Z. H. Wang, Axial-impact buckling modes and energy absorption properties of thin-walled corrugated tubes with sinusoidal patterns, Thin-Walled Struct., vol. 94, pp. 410–423, 2015. DOI: https://doi.org/10.1016/j.tws.2015.05.002.
- S. Wu, G. Li, G. Sun, X. Wu, and Q. Li, Crashworthiness analysis and optimization of sinusoidal corrugation tube, Thin-Walled Struct., vol. 105, pp. 121–134, 2016. DOI: https://doi.org/10.1016/j.tws.2016.03.029.
- W. Q. Hao, J. M. Xie, and F. H. Wang, Theoretical prediction of the progressive buckling and energy absorption of the sinusoidal corrugated tube subjected to axial crushing, Comput. Struct., vol. 191, pp. 12–21, 2017. DOI: https://doi.org/10.1016/j.compstruc.2017.05.001.
- R. Y. Yao, W. Q. Hao, G. S. Yin, and Zhang Bei, Analytical model of circular tube with wide external circumferential grooves under axial crushing, Int J Crashworthiness., 2019, DOI: https://doi.org/10.1080/13588265.2019.1617096.
- S. J. Hosseinipour and G. H. Daneshi, Energy absorption and mean crushing load of thin-walled grooved tubes under axial compression, Thin-Walled Struct., vol. 41, no. 1, pp. 31–46, 2003. DOI: https://doi.org/10.1016/S0263-8231(02)00099-X.
- S. J. Hosseinipour, Mathematical model for thin-walled grooved tubes under axial compression, Mater. Des., vol. 24, no. 6, pp. 463–469, 2003. DOI: https://doi.org/10.1016/S0261-3069(03)00063-3.
- M. J. Rezvani and M. D. Nouri, Analytical model for energy absorption and plastic collapse of thin-walled grooved frusta tubes, Mech. Adv. Mater. Struct., vol. 22, no. 5, pp. 338–348, 2015. DOI: https://doi.org/10.1080/15376494.2012.736054.
- F. Mokhtarnezhad, S. Salehghaffari, and M. Tajdari, Improving the crashworthiness characteristics of cylindrical tubes subjected to axial compression by cutting wide grooves from their outer surface, Int. J. Crashworthiness., vol. 14, no. 6, pp. 601–611, 2009. DOI: https://doi.org/10.1080/13588260902896466.
- A. Darvizeh, A. Meshkinzar, M. Alitavol, and R. Rajabiehfard, Low velocity impact of empty and foam filled circumferentially grooved thick-walled circular tubes, Thin-Walled Struct., vol. 110, pp. 97–105, 2017. DOI: https://doi.org/10.1016/j.tws.2016.09.002.
- R. Y. Yao, G. S. Yin, W. Q. Hao, Z. Y. Zhao, X. Li, and X. L. Qin, Axial buckling modes and crashworthiness of circular tube with external linear gradient grooves, Thin-Walled Struct., vol. 134, pp. 395–406, 2019. DOI: https://doi.org/10.1016/j.tws.2018.10.022.
- R. Y. Yao, Z. Y. Zhao, W. Q. Hao, G. S. Yin, and B. Zhang, Experimental and theoretical investigations on axial crushing of aluminum foam-filled grooved tube, Compos. Struct., vol. 226, pp. 111229, 2019. DOI: https://doi.org/10.1016/j.compstruct.2019.111229.
- N. K. Gupta, Some aspects of axial collapse of cylindrical thin-walled tubes, Thin-Walled Struct., vol. 32, no. 1–3, pp. 111–126, 1998. DOI: https://doi.org/10.1016/S0263-8231(98)00029-9.
- H. Han, J. Cheng, F. Taheri, and N. Pegg, Numerical and experimental investigations of the response of aluminum cylinders with a cutout subject to axial compression, Thin-Walled Struct., vol. 44, no. 2, pp. 254–270, 2006. DOI: https://doi.org/10.1016/j.tws.2005.11.003.
- H. Han, F. Taheri, and N. Pegg, Quasi-static and dynamic crushing behaviors of aluminum and steel tubes with a cutout, Thin-Walled Struct., vol. 45, no. 3, pp. 283–300, 2007. DOI: https://doi.org/10.1016/j.tws.2007.02.010.
- H. Yılmaz, İ. Kocabaş, and E. Özyurt, Empirical equations to estimate non-linear collapse of medium-length cylindrical shells with circular cutouts, Thin-Walled Struct., vol. 119, pp. 868–878, 2017. DOI: https://doi.org/10.1016/j.tws.2017.08.008.
- M. Elyasi, A. Moradpour, and S. Montazeri, Axial crushing in a novel technique of thin-walled tube, Key Eng Mech., vol. 622–623, pp. 709–716, 2014.
- A. Moradpour, M. Elyasi, and S. Montazeri, Developing a new thin-walled tube structure and analyzing its crushing performance for aa 60601 and mild steel under axial loading, Trans. Indian Inst. Met., vol. 69, no. 5, pp. 1107–1117, 2016. DOI: https://doi.org/10.1007/s12666-015-0629-2.
- S. Montazeri, M. Elyasi, and A. Moradpour, Investigating the energy absorption, SEA and crushing performance of holed and grooved thin-walled tubes under axial loading with different materials, Thin-Walled Struct., vol. 131, pp. 646–653, 2018. DOI: https://doi.org/10.1016/j.tws.2018.07.024.
- H. J. Yu, Z. Q. Guo, B. Li, G. C. Yao, H. J. Luo, and Y. H. Liu, Research into the effect of cell diameter of aluminum foam on its compressive and energy absorption properties, Mater. Sci. Eng. A., vol. 454–455, pp. 542–546, 2007. DOI: https://doi.org/10.1016/j.msea.2006.11.091.
- A. G. Hanssen, M. Langseth, and O. S. Hopperstad, Static and dynamic crushing of circular aluminium extrusions with aluminium foam filler, Int. J. Impact Eng., vol. 24, no. 5, pp. 475–507, 2000. DOI: https://doi.org/10.1016/S0734-743X(99)00170-0.
- A. G. Hanssen, O. S. Hopperstad, and M. Langseth, Design of aluminium foam-filled crash boxes of square and circular cross-sections, Int. J. Crashworthiness., vol. 6, no. 2, pp. 177–188, 2001. DOI: https://doi.org/10.1533/cras.2001.0171.
- F. Yang, H. Fan, and S. A. Meguid, Effect of foam-filling on collapse mode transition of thin-walled circular columns under axial compression: Analytical, numerical and experimental studies, Int. J. Mech. Sci., vol. 150, pp. 665–676, 2019. DOI: https://doi.org/10.1016/j.ijmecsci.2018.10.047.
- W. Abramowicz, and T. Wierzbicki, Axial crushing of foam-filled columns, Int. J. Mech. Sci., vol. 30, no. 3–4, pp. 263–271, 1988. DOI: https://doi.org/10.1016/0020-7403(88)90059-8.
- S. A. Meguid, F. Yang, and P. Verberne, Progressive collapse of foam-filled conical frustum using kinematically admissible mechanism, Int. J. Impact. Eng., vol. 82, pp. 25–35, 2015. DOI: https://doi.org/10.1016/j.ijimpeng.2014.11.013.
- F. Yang, S. A. Meguid, and A. M. S. Hamouda, Kinematically admissible folding mechanisms: for the progressive collapse of foam filled conical frusta, Int. J. Mech. Mater. Des., vol. 14, no. 1, pp. 105–126, 2018. DOI: https://doi.org/10.1007/s10999-016-9364-z.
- ASTM Standard, ASTM E8/E8M-16a. Standard test methods for tension testing of metallic materials; 2016.
- ASTM Standard, ASTM D1621-16. Standard test method for compressive properties of rigid cellular plastics; 2016.
- C. R. Calladine, and R. W. English, Strain-rate and inertia effects in the collapse of two types of energy-absorbing structure, Int. J. Mech. Sci., vol. 26, no. 11–12, pp. 689–701, 1984. DOI: https://doi.org/10.1016/0020-7403(84)90021-3.
- S. R. Guillow, G. Lu, and R. H. Grzebieta, Quasi-static axial compression of thin-walled circular aluminum tubes, Int. J. Mech. Sci., vol. 43, no. 9, pp. 2103–2123, 2001. DOI: https://doi.org/10.1016/S0020-7403(01)00031-5.
- X. Zhang, H. Zhang, and Z. Z. Wen, Axial crushing of tapered circular tubes with graded thickness, Int. J. Mech. Sci., vol. 92, pp. 12–23, 2015. DOI: https://doi.org/10.1016/j.ijmecsci.2014.11.022.
- J. S. Lin, X. Wang, and G. Lu, Crushing characteristics of fiber reinforced conical tubes with foam-filler, Compose Struct., vol. 116, pp. 18–28, 2014. DOI: https://doi.org/10.1016/j.compstruct.2014.04.023.
- W. Abramowicz, The effective crushing distance in axially compressed thin-walled metal columns, Int. J. Impact. Eng., vol. 1, no. 3, pp. 309–317, 1983. DOI: https://doi.org/10.1016/0734-743X(83)90025-8.
- T. Wierzbicki, and W. Abramowicz, On the crushing mechanics of thin-walled structures, J. Appl. Mech.-Trans. ASME., vol. 50, no. 4a, pp. 727–734, 1983. DOI: https://doi.org/10.1115/1.3167137.
- W. Abramowicz, and T. Wierzbicki, Axial crushing of multicorner sheet metal columns, J. Appl. Mech.-Trans. ASME., vol. 56, no. 1, pp. 113–120, 1989. DOI: https://doi.org/10.1115/1.3176030.
- S. G. Hu, Analysis and discussion on the results of uniaxial tension test of several aluminum alloy sheets, J. Beijing Inst. Aeronaut Astronaut., vol. 1, pp. 111–124, 1984. (in Chinese)