References
- B. Tepeduzu and R. Karakuzu, Ballistic performance of ceramic/composite structures, Ceram. Int., vol. 45, no. 2, pp. 1651–1660, 2019. DOI: https://doi.org/10.1016/j.ceramint.2018.10.042.
- E. Medvedovski, Ballistic performance of armour ceramics: Influence of design and structure, Part 2. Ceram. Int., vol. 36, no. 7, pp. 2117–2127, 2010. DOI: https://doi.org/10.1016/j.ceramint.2010.05.022.
- T.K. Ćwik, L. Iannucci, P. Curtis, and D. Pope, Investigation of the ballistic performance of ultra high molecular weight polyethylene composite panels, Compos. Struct., vol. 149, pp. 197–212, 2016. DOI: https://doi.org/10.1016/j.compstruct.2015.11.009.
- P.R.S. Reddy, T.S. Reddy, V. Madhu, A.K. Gogia, and K.V. Rao, Behavior of E-glass composite laminates under ballistic impact, Mater. Des., vol. 84, pp. 79–86, 2015. DOI: https://doi.org/10.1016/j.matdes.2015.06.094.
- J.-H. Lee, P.E. Loya, J. Lou, and E.L. Thomas, Dynamic mechanical behavior of multilayer graphene via supersonic projectile penetration, Science., vol. 346, no. 6213, pp. 1092–1096, 2014. DOI: https://doi.org/10.1126/science.1258544.
- A. Krell and E. Strassburger, Hierarchy of key influences on the ballistic strength of opaque and transparent armor, Ceram. Eng. Sci. Proc., vol. 28, no. 5, pp. 45–55, 2008.
- Z.H. Tan, X. Han, W. Zhang, and S.H. Luo, An investigation on failure mechanisms of ceramic/metal armour subjected to the impact of tungsten projectile, Int. J. Impact Eng., vol. 37, no. 12, pp. 1162–1169, 2010. DOI: https://doi.org/10.1016/j.ijimpeng.2010.07.004.
- M. Garcia-Avila, M. Portanova, and A. Rabiei, Ballistic performance of a composite metal foam-ceramic armor system, Procedia Mater. Sci., vol. 4, pp. 151–150, 2014. DOI: https://doi.org/10.1016/j.mspro.2014.07.571.
- A. Serjouei, G. Gour, X. Zhang, S. Idapalapati, and G.E.B. Tan, On improving ballistic limit of bi-layer ceramic–metal armor, Int. J. Impact Eng., vol. 105, pp. 54–67, 2017. DOI: https://doi.org/10.1016/j.ijimpeng.2016.09.015.
- W.-R. Wang, H.-F. Xie, L. Xie, H.-L. Li, X. Yang, and Y.-N. Shen, Anti-penetration performance of high entropy alloy–ceramic gradient composites, Int. J. Miner. Metall. Mater., vol. 25, no. 11, pp. 1320–1328, 2018. DOI: https://doi.org/10.1007/s12613-018-1685-5.
- A. Gositanon, M. Chaiyarit, and S. Phabjanda, Ballistic simulation and verification of ceramic/rubber composite armour, 6th International Conference on Mechanical, Automotive and Materials Engineering, 2018. DOI: https://doi.org/10.1109/CMAME.2018.8592310.
- F. Ahmad, F. Abbassi, M.K. Park, and J.-W. Hong, Numerical investigation to evaluate effect of fiber orientation on penetration-resistance of an aircraft composite material, Mech. Adv. Mater. Struct., vol. 26, no. 19, pp. 1613–1621, 2019. DOI: https://doi.org/10.1080/15376494.2018.1444226.
- N.K. Naik, S. Kumar, D. Ratnaveer, M. Joshi, and K. Akella, An energy-based model for ballistic impact analysis of ceramic-composite armors, Int. J. Damage Mech., vol. 22, no. 2, pp. 145–187, 2013. DOI: https://doi.org/10.1177/1056789511435346.
- S. Feli and M.R. Asgari, Finite element simulation of ceramic/composite armor under ballistic impact, Compos. Part B: Eng., vol. 42, no. 4, pp. 771–780, 2011. DOI: https://doi.org/10.1016/j.compositesb.2011.01.024.
- L. Deka, S. Bartus, and U. Vaidya, Damage evolution and energy absorption of E-glass/polypropylene laminates subjected to ballistic impact. Add this article to my list, J. Mater. Sci., vol. 43, no. 13, pp. 4399–4410, 2008. DOI: https://doi.org/10.1007/s10853-008-2595-0.
- H. Nianming, C. Changhai, Z. Xi, and H. Hailiang, Experimental research on anti-penetration performance of stacked structure of ceramic/kevlar composite laminates, Acta Armamentarii, vol. 39, no. 5, pp. 976–982, 2018.
- D. Hu, Y. Zhang, Z. Shen, and Q. Cai, Investigation on the ballistic behavior of mosaic SiC/UHMWPE composite armor systems, Ceram. Int., vol. 43, no. 13, pp. 10368–10376, 2017. DOI: https://doi.org/10.1016/j.ceramint.2017.05.071.
- F. da C. Garcia Filho and S.N. Monteiro, Piassava fiber as an epoxy matrix composite reinforcement for ballistic armor applications, Miner., Metals Mater. Soc., vol. 71, no. 2, pp. 801–808, 2019. DOI: https://doi.org/10.1007/s11837-018-3148-x.
- F. de Oliveira Braga, T. Lara Milanezi, S. Neves Monteiro, L. Henrique Leme Louro, A. Vieira Gomes, and É. Pereira Lima, Jr. Ballistic comparison between epoxy-ramie and epoxy-aramid composites in multilayered armor systems, J. Mater. Res. Technol., vol. 7, no. 4, pp. 541–549, 2018. DOI: https://doi.org/10.1016/j.jmrt.2018.06.018.
- I.H. Chen et al., Armadillo armor: Mechanical testing and micro-structural evaluation, J. Mech. Behav. Biomed. Mater., vol. 4, no. 5, pp. 713–722, 2011. DOI: https://doi.org/10.1016/j.jmbbm.2010.12.013.
- J. McKittrick et al., Energy absorbent natural materials and bioinspired design strategies: A review, Mater. Sci. Eng.: C., vol. 30, no. 3, pp. 331–342, 2010. DOI: https://doi.org/10.1016/j.msec.2010.01.011.
- H. Essabir et al., Mechanical and thermal properties of bio-composites based on polypropylene reinforced with Nut-shells of Argan particles, Mater. Des., vol. 49, pp. 442–448, 2013. DOI: https://doi.org/10.1016/j.matdes.2013.01.025.
- X. Xu, R. Augello, and H. Yang, The generation and validation of a CUF-based FEA model with laser-based experiments, Mech. Adv. Mater. Struct., pp. 1–8, 2019. DOI: https://doi.org/10.1080/15376494.2019.1697473.
- H. Yang and X. Xu, Multi-sensor technology for B-spline modelling and deformation analysis of composite structures, Compos. Struct., vol. 224, pp. 111000, 2019. DOI: https://doi.org/10.1016/j.compstruct.2019.111000.
- K. Krishnan, S. Sockalingam, S. Bansal, and S.D. Rajan, Numerical simulation of ceramic composite armor subjected to ballistic impact, Compos. Part B: Eng., vol. 41, no. 8, pp. 583–593, 2010. DOI: https://doi.org/10.1016/j.compositesb.2010.10.001.
- P. Miranda, A. Pajares, and M.A. Meyers, Bioinspired composite segmented armour: Numerical simulations, J. Mater. Res. Technol., vol. 8, no. 1, pp. 1274–1287, 2019. DOI: https://doi.org/10.1016/j.jmrt.2018.09.007.
- H. Zeng, Z. Yuan, J. Qiu, and X. Chen, Finite element study on the influence of structural parameters on the ballistic performance of 3D networked fabrics, Appl. Compos. Mater., vol. 25, no. 4, pp. 891–903, 2018. DOI: https://doi.org/10.1007/s10443-018-9721-1.
- P. Liu, D. Zhu, Y. Yao, J. Wang, and T.Q. Bui, Numerical simulation of ballistic impact behavior of bio-inspired scale-like protection system, Mater. Des., vol. 99, pp. 201–210, 2016. DOI: https://doi.org/10.1016/j.matdes.2016.03.040.
- M. Szymczyk, W. Sumelka, and T. Łodygowski, Numerical investigation on ballistic resistance of aluminium multi-layered panels impacted by improvised projectiles, Arch. Appl. Mech., vol. 88, no. 1-2, pp. 51–63, 2018. DOI: https://doi.org/10.1007/s00419-017-1247-8.
- S. Monteiro, É. Lima, L. Louro, L. Silva, and J. Drelich, Unlocking function of Aramid fibers in multilayered ballistic armor, Metall. Mat. Trans. A, vol. 46, no. 1, pp. 37–40, 2015. DOI: https://doi.org/10.1007/s11661-014-2678-2.
- Z. Xi, Z. Zhenhua, M. Zhiyuan, and H. Hailiang, Damage Mechanics of Warship Structure Subjected to Explosion, National Defense Industry Press, China, 2013.
- G.R. Johnson and W.H. Cook, A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures, Proceedings of the 7th International Symposium on Ballistics, pp. 541–548, 1983.
- J.W. Hancock and A.C. Mackenzie, On the mechanisms of ductile failure in high-strength steels subjected to multi-axial stress-states, J. Mech. Phys. Solids., vol. 24, no. 2–3, pp. 147–160, 1976. DOI: https://doi.org/10.1016/0022-5096(76)90024-7.
- G.R. Johnson and W.H. Cook, Fracture characteristics of three metals subjected to various strains, strain rates, temperatures and pressures, Eng. Fract. Mech., vol. 21, no. 1, pp. 31–48, 1985. DOI: https://doi.org/10.1016/0013-7944(85)90052-9.
- G.R. Johnson and T.J. Holmquist, An improved computational constitutive model for brittle materials, AIP Conf. Proc., vol. 309, no. 1, pp. 981–984, 1994.
- A. Tasdemirci, G. Tunusoglu, and M. Güden, The effect of the interlayer on the ballistic performance of ceramic/composite armors: Experimental and numerical study, Int. J. Impact Eng., vol. 44, no. 3, pp. 1–9, 2012. DOI: https://doi.org/10.1016/j.ijimpeng.2011.12.005.
- C. Liu, Y.X. Zhang, and L. Ye, High velocity impact responses of sandwich panels with metal fibre laminate skins and aluminium foam core, Int. J. Impact Eng., vol. 100, pp. 139–153, 2017. DOI: https://doi.org/10.1016/j.ijimpeng.2016.09.004.
- H. Nianming, C. Changhai, H. Hailiang, and Z. Xi, Simulation on damage characteristic of composite laminates under high-velocity projectile impact, Ordnance Mater. Sci. Eng., vol. 3, pp. 66–70, 2017.
- C.J. Yungwirth, D.D. Radford, M. Aronson, and H.N.G. Wadley, Experiment assessment of the ballistic response of composite pyramidal lattice truss structures, Compos.: Part B., vol. 39, pp. 55–569, 2008.
- W. Xiaoqiang, Z. Xi, M. Zhiyuan, and C. Xin, Ballistic performances of ultra high fiber reinforced thick molecular weight polyethylene laminated plates (in Chinese), Explosion Shock Waves, vol. 29, no. 1, pp. 29–34, 2009.