References
- A. Horvath and C. Hendrickson, Steel versus steel-reinforced concrete bridges: environmental assessment, J. Infrastruct. Syst., vol. 4, no. 3, pp. 111–117, 1998. DOI: https://doi.org/10.1061/(ASCE)1076-0342(1998)4:3(111).
- B. Liu, C. Feng, and Z. Deng, Shear behavior of three types of recycled aggregate concrete, Constr. Build. Mater., vol. 217, pp. 557–572, 2019. DOI: https://doi.org/10.1016/j.conbuildmat.2019.05.079.
- I. Vayas and A. Iliopoulos, Design of Steel-Concrete Composite Bridges to Eurocodes, CRC Press, Boca Raton (FL), 2013.
- Z. Li, X. Ma, J. Fan, and X. Nie, Overhanging tests of steel-concrete composite girders with different connectors, J. Bridge Eng., vol. 24, no. 11, pp. 4019098, 2019. DOI: https://doi.org/10.1061/(ASCE)BE.1943-5592.0001481.
- M. Hirt and J. Lebet, Steel Bridges: Conceptual and Structural Design of Steel and Steel-Concrete Composite Bridges, EPFL Press, New York (NY), 2013.
- R. Johnson, Composite Structures of Steel and Concrete: Beams, Slabs, Columns and Frames for Buildings Wiley, Hoboken (NJ), 2018.
- J. Nie, C. Cai, T. Zhou, and Y. Li, Experimental and analytical study of prestressed steel-concrete composite beams considering slip effect, J. Struct. Eng., vol. 133, no. 4, pp. 530–540, 2007. DOI: https://doi.org/10.1061/(ASCE)0733-9445(2007)133:4(530).
- J. Nie, Y. Xiao, and L. Chen, Experimental studies on shear strength of composite steel-concrete beams, J. Struct. Eng., vol. 130, no. 8, pp. 1206–1213, 2004. DOI: https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1206).
- J. Nie, L. Tang, and C. Cai, Performance of steel-concrete composite beams under combined bending and torsion, J. Struct. Eng., vol. 135, no. 9, pp. 1048–1057, 2009. DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0000042.
- J. Nie, and C. Cai, Steel-concrete composite beams considering shear slip effects, J. Struct. Eng., vol. 129, no. 4, pp. 495–506, 2003. DOI: https://doi.org/10.1061/(ASCE)0733-9445(2003)129:4(495).
- L. Zhu and R. Su, Analytical solutions for composite beams with slip, shear-lag and time-dependent effects, Eng. Struct., vol. 152, pp. 559–578, 2017. DOI: https://doi.org/10.1016/j.engstruct.2017.08.071.
- L. Zhu, J. Nie, and W. Ji, Positive and negative shear lag behaviors of composite twin-girder decks with varying cross-section, Sci. China Technol. Sci., vol. 60, no. 1, pp. 116–132, 2017. DOI: https://doi.org/10.1007/s11431-016-0314-x.
- J. Nie, K. Qin, and C. Cai, Seismic behavior of connections composed of CFSSTCs and steel-concrete composite beams-finite element analysis, J. Constr. Steel Res., vol. 64, no. 6, pp. 680–688, 2008. DOI: https://doi.org/10.1016/j.jcsr.2007.12.003.
- Y. Wang, J. Nie, and C. Cai, Numerical modeling on concrete structures and steel-concrete composite frame structures, Compos. Part B., vol. 51, pp. 58–67, 2013. DOI: https://doi.org/10.1016/j.compositesb.2013.02.035.
- J. Nie, C. Tian, and C. Cai, Effective width of steel-concrete composite beam at ultimate strength state, Eng. Struct., vol. 30, no. 5, pp. 1396–1407, 2008. DOI: https://doi.org/10.1016/j.engstruct.2007.07.027.
- L. Zhu, J. Nie, F. Li, and W. Ji, Simplified analysis method accounting for shear-lag effect of steel-concrete composite decks, J. Constr. Steel Res., vol. 115, pp. 62–80, 2015. DOI: https://doi.org/10.1016/j.jcsr.2015.08.020.
- Ministry of Housing and Urban-Rural Development of China. GB 50017-2017 Code for Design of Steel and Concrete Composite Bridges, China Architecture and Building Press, Beijing (China), 2017.
- Ministry of Housing and Urban-Rural Development of China. JGJ 138-2016 Code for Design of Composite Structures, China Architecture and Building Press, Beijing (China), 2016.
- J. Li, H. Hao, K. Fan, and J. Brownjohn, Development and application of a relative displacement sensor for structural health monitoring of composite bridges, Struct. Control Health Monit., vol. 22, no. 4, pp. 726–742, 2015. DOI: https://doi.org/10.1002/stc.1714.
- P. Pachón, R. Castro, et al., E. Torroja's bridge: Tailored experimental setup for SHM of a historical bridge with a reduced number of sensors, Eng. Struct., vol. 162, pp. 11–21, 2018. DOI: https://doi.org/10.1016/j.engstruct.2018.02.035.
- B. Değerliyurt, C. Karataş, M. Şahin, et al., Structural health monitoring system of composite beams with surface bonded and embedded fibre bragg grating sensors, Kem., vol. 744, pp. 332–336, 2017. DOI: https://doi.org/10.4028/www.scientific.net/KEM.744.332.
- D. Wang, Y. Liu, and Y. Liu, 3D temperature gradient effect on a steel–concrete composite deck in a suspension bridge with field monitoring data, Struct. Control Health Monit., vol. 25, no. 7, pp. e2179, 2018. DOI: https://doi.org/10.1002/stc.2179.
- X.Y. Pei, C. Li, et al., Effect of damage on the vibration modal of a novel three-dimensional and four-directional braided composite T-beam, Compos. Part B Eng., vol. 86, pp. 108–119, 2016. DOI: https://doi.org/10.1016/j.compositesb.2015.09.022.
- X. Li and G. Branko, Integrating finite element modeling with sensing system for monitoring composite structures using the method of neutral axis, Struct. Eng. Int., vol. 29, no. 1, pp. 8–17, 2019. DOI: https://doi.org/10.1080/10168664.2018.1509681.
- J. Nie and L. Zhu, Beam-truss model of steel-concrete composite box-girder bridges, J. Bridge Eng., vol. 19, no. 7, pp. 4014023, 2014. DOI: https://doi.org/10.1061/(ASCE)BE.1943-5592.0000592.
- S. Chakraborty and J. DeWolf, Development and implementation of a continuous strain monitoring system on a multi-girder composite steel bridge, J. Bridge Eng., vol. 11, no. 6, pp. 753–762, 2006. DOI: https://doi.org/10.1061/(ASCE)1084-0702(2006)11:6(753).
- D. Farhey, Long-term performance monitoring of the Tech 21 all-composite bridge, J. Compos. Constr., vol. 9, no. 3, pp. 255–262, 2005. DOI: https://doi.org/10.1061/(ASCE)1090-0268(2005)9:3(255).
- W. Deng, D. Liu, Y. Xiong, and J. Zhang, Experimental study on asynchronous construction for composite bridges with corrugated steel webs, J. Constr. Steel Res., vol. 157, pp. 93–102, 2019. DOI: https://doi.org/10.1016/j.jcsr.2019.02.028.
- L. Butler, W. Lin, J. Xu, N. Gibbons, M. Elshafie, and C.R. Middleton, Monitoring, modeling, and assessment of a self-sensing railway bridge during construction, J. Bridge Eng., vol. 23, no. 10, pp. 4018076, 2018. DOI: https://doi.org/10.1061/(ASCE)BE.1943-5592.0001288.
- V. Bungard, M. Waltering, D. Waldmann, S. Maas, A. Zürbes, and G. De Roeck, Structural health monitoring of a composite bridge, 26th International Modal Analysis Conference (IMAC-XXVI, February 4–6, Orlando, FL, 2008.
- D. Krzmarzick and J. Hajjar, Load rating of curved composite steel I-girder bridges through load testing with heavy trucks, Structures Congress, May 18–21, St. Louis, Missouri, 2006. DOI: https://doi.org/10.1061/40889(201)149.
- H. Yang, X. Xu, B. Kargoll, and I. Neumann, An automatic and intelligent optimal surface modeling method for composite tunnel structures, Compos. Struct., vol. 208, pp. 702–710, 2019. DOI: https://doi.org/10.1016/j.compstruct.2018.09.082.
- X. Xu, H. Yang, R. Augello, and E. Carrera, Optimized free-form surface modeling of point clouds from laser-based measurement, Mech. Adv. Mater. Struct., pp. 1–9, 2019. DOI: https://doi.org/10.1080/15376494.2019.1688435
- X. Xu, R. Augello, and H. Yang, The generation and validation of a CUF-based FEA model with laser-based experiments, Mech. Adv. Mater. Struct., pp. 1–8, 2019. DOI: https://doi.org/10.1080/15376494.2019.1697473
- K. Samir, B. Brahim, R. Capozucca, et al., Damage detection in CFRP composite beams based on vibration analysis using proper orthogonal decomposition method with radial basis functions and cuckoo search algorithm, Compos. Struct., vol. 187, pp. 344–353, 2018. DOI: https://doi.org/10.1016/j.compstruct.2017.12.058.
- B. Han, T. Xiang, and H. Xie, A Bayesian inference framework for predicting the long-term deflection of concrete structures caused by creep and shrinkage, Eng. Struct., vol. 142, pp. 46–55, 2017. DOI: https://doi.org/10.1016/j.engstruct.2017.03.055.
- H. Xie, Y. Wang, H. Wu, and Z. Li, Condition assessment of existing RC highway bridges in China based on SIE2011, J. Bridge Eng., vol. 19, no. 12, pp. 4014053, 2014. DOI: https://doi.org/10.1061/(ASCE)BE.1943-5592.0000633.
- C. Liu, The temperature field and thermal effect of steel-concrete composite bridges [dissertation]. Tsinghua University, Beijing (China), 2018.
- M. Dias, J. Tamayo, I. Morsch, and A. Awruch, Time dependent finite element analysis of steel-concrete composite beams considering partial interaction, Comput. Concr., vol. 15, no. 4, pp. 687–707, 2015. DOI: https://doi.org/10.12989/cac.2015.15.4.687.
- Z. Bazant, Prediction of concrete creep effects using age-adjusted effective modulus method, ACI J., vol. 69, no. 4, pp. 212–217, 1972.
- Ministry of Transport of China. JTG/T J21-2011 Specification for Inspection and Evaluation of Load-Bearing Capacity of Highway Bridges, China Communications Press, Beijing (China), 2011.