References
- L. Bouhala, A. Makradi, and S. Belouettar, Thermal and thermo-mechanical influence on crack propagation using an extended mesh free method, Eng. Fract. Mech., vol. 88, pp. 35–48, 2012. DOI: https://doi.org/10.1016/j.engfracmech.2012.04.001.
- H. Pathak, A. Singh, and I.V. Singh, Numerical simulation of thermo-mechanical crack problems using EFGM and XFEM, Proceedings of 1st National Conference on Recent Advances in Technology and Engineering, Aligarh, Uttar Pradesh, 2012.
- R.D. Henshell and K.G. Shaw, Crack tip finite elements are unnecessary, Int. J. Numer. Methods Eng., vol. 9, no. 3, pp. 495–507, 1975. DOI: https://doi.org/10.1002/nme.1620090302.
- W.K. Wilson and I.W. Yu, The use of the J-integral in thermal stress crack problems, Int. J. Fract., vol. 15, no. 4, pp. 377–387, 1979.
- C.F. Shih, B. Moran, and T. Nakamura, Energy release rate along a three-dimensional crack front in a thermally stressed body, Int. J. Fract., vol. 30, no. 2, pp. 79–102, 1986.
- S.T. Raveendra, P.K. Banerjee, and G.F. Dargush, Three-dimensional analysis of thermally loaded cracks, Int. J. Numer. Methods Eng., vol. 36, no. 11, pp. 1909–1926, 1993. DOI: https://doi.org/10.1002/nme.1620361108.
- N.N.V. Prasad, M.H. Aliabadi, and D.P. Rooke, The dual boundary element method for thermo-elastic crack problems, Int. J. Fract., vol. 66, no. 3, pp. 255–272, 1994. DOI: https://doi.org/10.1007/BF00042588.
- N.N.V. Prasad, M.H. Aliabadi, and D.P. Rooke, Incremental crack growth in thermoelastic problems, Int. J. Fract., vol. 66, no. 3, pp. R45–R50, 1994. DOI: https://doi.org/10.1007/BF00042591.
- T. Belytschko, Y.Y. Lu, and L. Gu, Element-free Galerkin methods, Int. J. Numer. Methods Eng., vol. 37, no. 2, pp. 229–256, 1994. DOI: https://doi.org/10.1002/nme.1620370205.
- W.K. Liu, S. Jun, and Y.F. Zhang, Reproducing kernel particle methods, Int. J. Numer. Methods Fluids, vol. 20, no. 8–9, pp. 1081–1106, 1995. DOI: https://doi.org/10.1002/fld.1650200824.
- T. Belytschko and T. Black, Elastic crack growth in finite elements with minimal remeshing, Int. J. Numer. Methods Eng., vol. 45, no. 5, pp. 601–620, 1999. DOI: https://doi.org/10.1002/(SICI)1097-0207(19990620)45:5<601::AID-NME598>3.0.CO;2-S.
- I.V. Singh, B.K. Mishra, S. Bhattacharya, and R.U. Patil, The numerical simulation of fatigue crack growth using extended finite element method, Int. J. Fatigue, vol. 36, no. 1, pp. 109–119, 2012. DOI: https://doi.org/10.1016/j.ijfatigue.2011.08.010.
- R.U. Patil, B.K. Mishra, and I.V. Singh, A new multiscale XFEM for the elastic properties evaluation of heterogeneous materials, Int. J. Mech. Sci., vol. 122, pp. 277–287, 2017. DOI: https://doi.org/10.1016/j.ijmecsci.2017.01.028.
- M. Pant, I.V. Singh, and B.K. Mishra, Numerical simulation of thermo-elastic fracture problems using element free Galerkin method, Int. J. Mech. Sci., vol. 52, no. 12, pp. 1745–1755, 2010. DOI: https://doi.org/10.1016/j.ijmecsci.2010.09.008.
- J.P. Zhang, S.S. Wang, S.G. Gong, Q.S. Zuo, and H.Y. Hu, Thermo-mechanical coupling analysis of the orthotropic structures by using element-free Galerkin method, Eng. Anal. Bound. Elem., vol. 101, pp. 198–213, 2019. DOI: https://doi.org/10.1016/j.enganabound.2019.01.011.
- P. Michlik and C. Berndt, Image-based extended finite element modeling of thermal barrier coatings, Surf. Coat. Technol., vol. 201, no. 6, pp. 2369–2380, 2006. DOI: https://doi.org/10.1016/j.surfcoat.2006.04.003.
- M. Duflot, The extended finite element method in thermoelastic fracture mechanics, Int. J. Numer. Meth. Engng., vol. 74, no. 5, pp. 827–847, 2008. DOI: https://doi.org/10.1002/nme.2197.
- M. Fagerstrom and R. Larsson, A thermo-mechanical cohesive zone formulation for ductile fracture, J. Mech. Phys. Solids, vol. 56, no. 10, pp. 3037–3058, 2008. DOI: https://doi.org/10.1016/j.jmps.2008.06.002.
- A. Zamani, R. Gracie, and M.R. Eslami, Higher order tip enrichment of extended finite element method in thermoelasticity, Comput. Mech., vol. 46, no. 6, pp. 851–866, 2010. DOI: https://doi.org/10.1007/s00466-010-0520-2.
- A. Zamani and M.R. Eslami, Implementation of the extended finite element method for dynamic thermoelastic fracture initiation, Int. J. Solids Struct., vol. 47, no. 10, pp. 1392–1404, 2010. DOI: https://doi.org/10.1016/j.ijsolstr.2010.01.024.
- S.S. Hosseini, H. Bayesteh, and S. Mohammadi, Thermo-mechanical XFEM crack propagation analysis of functionally graded materials, Mater. Sci. Eng. A, vol. 561, pp. 285–302, 2013. DOI: https://doi.org/10.1016/j.msea.2012.10.043.
- A. Singh, H. Pathak, and I.V. Singh, Crack interaction study under thermo-mechanical loading by XFEM, In: Multi-Physics Modeling of Solids an International Colloquium, ENSTA ParisTech, Paris, France, pp. 6–8, 2014.
- H. Jia and Y. Nie, Thermoelastic analysis of multiple defects with the extended finite element method, Acta Mech. Sin., vol. 32, no. 6, pp. 1123–1137, 2016. DOI: https://doi.org/10.1007/s10409-016-0598-7.
- K. He, Q. Yang, D. Xiao, and X. Li, Analysis of thermo-elastic fracture problem during aluminium alloy MIG welding using the extended finite element method, Appl. Sci., vol. 7, no. 1, pp. 69, 2017. DOI: https://doi.org/10.3390/app7010069.
- H. Pathak, R.K. Mishra, A. Singh, and I.V. Singh, Simulation of 3-D cracks under thermo-mechanical environment, Mater. Today: Procd., vol. 4, no. 9, pp. 10259–10263, 2017. DOI: https://doi.org/10.1016/j.matpr.2017.06.360.
- F. Habib, L. Sorelli, and M. Fafard, Full thermo-mechanical coupling using extended finite element method in quasi-transient crack propagation, Adv. Model. Simul. Eng. Sci., vol. 5, no. 1, pp. 18, 2018.
- H. Pathak, Crack interaction study in functionally graded materials (FGMs) using XFEM under thermal and mechanical loading environment, Mech. Adv. Mater. Struct., vol. 27, no. 11, pp. 903–926, 2020. DOI: https://doi.org/10.1080/15376494.2018.1501834.
- T.J.R. Hughes, J.A. Cottrell, and Y. Bazilevs, Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement, Comput. Methods Appl. Mech. Eng., vol. 194, no. 39–41, pp. 4135–4195, 2005. DOI: https://doi.org/10.1016/j.cma.2004.10.008.
- S.K. Singh, I.V. Singh, G. Bhardwaj, and B.K. Mishra, A Bézier extraction based XIGA approach for three-dimensional crack simulations, Adv. Eng. Softw., vol. 125, pp. 55–93, 2018. DOI: https://doi.org/10.1016/j.advengsoft.2018.08.014.
- S.S. Ghorashi, N. Valizadeh, and S. Mohammadi, Extended isogeometric analysis for simulation of stationary and propagating cracks, Int. J. Numer. Methods Eng., vol. 89, no. 9, pp. 1069–1101, 2012. DOI: https://doi.org/10.1002/nme.3277.
- G. Bhardwaj, I.V. Singh, and B.K. Mishra, Numerical simulation of plane crack problems using extended isogeometric analysis, Proc. Eng., vol. 64, pp. 661–670, 2013. DOI: https://doi.org/10.1016/j.proeng.2013.09.141.
- S.S. Ghorashi, N. Valizadeh, S. Mohammadi, and T. Rabczuk, T-spline based XIGA for fracture analysis of orthotropic media, Compos. Struct., vol. 147, pp. 138–146, 2015. DOI: https://doi.org/10.1016/j.compstruc.2014.09.017.
- I.V. Singh, G. Bhardwaj, and B.K. Mishra, A new criterion for modeling multiple discontinuities passing through an element using XIGA, J. Mech. Sci. Technol., vol. 29, no. 3, pp. 1131–1143, 2015. DOI: https://doi.org/10.1007/s12206-015-0225-8.
- E. De Luycker, D.J. Benson, T. Belytschko, Y. Bazilevs, and M.C. Hsu, XFEM in isogeometric analysis for linear fracture mechanics, Int. J. Numer. Methods Eng., vol. 87, no. 6, pp. 541–565, 2011. DOI: https://doi.org/10.1002/nme.3121.
- S. Shojaee, M. Asgharzadeh, and A. Haeri, Crack analysis in orthotropic media using combination of isogeometric analysis and extended finite element, Int. J. Appl. Mech., vol. 06, no. 06, pp. 1450068, 2014. DOI: https://doi.org/10.1142/S1758825114500689.
- T.Q. Bui, Extended isogeometric dynamic and static fracture analysis for cracks in piezoelectric materials using NURBS, Comput. Methods Appl. Mech. Eng., vol. 295, pp. 470–509, 2015. DOI: https://doi.org/10.1016/j.cma.2015.07.005.
- G. Bhardwaj, I.V. Singh, B.K. Mishra, and T.Q. Bui, Numerical simulation of functionally graded cracked plates using NURBS based XIGA under different loads and boundary conditions, Compos. Struct., vol. 126, pp. 347–359, 2015. DOI: https://doi.org/10.1016/j.compstruct.2015.02.066.
- T. Yu, et al., On the thermal buckling analysis of functionally graded plates with internal defects using extended isogeometric analysis, Compos. Struct., vol. 136, pp. 684–695, 2016. DOI: https://doi.org/10.1016/j.compstruct.2015.11.002.
- S.K. Singh, I.V. Singh, B.K. Mishra, G. Bhardwaj, and S.K. Singh, Analysis of cracked plate using higher-order shear deformation theory: Asymptotic crack-tip fields and XIGA implementation, Comput. Methods Appl. Mech. Eng., vol. 336, pp. 594–639, 2018. DOI: https://doi.org/10.1016/j.cma.2018.03.009.
- L.V. Tran, P. Phung-Van, J. Lee, M.A. Wahab, and H. J. C. S. Nguyen-Xuan, Isogeometric analysis for nonlinear thermo-mechanical stability of functionally graded plates, Compos. Struct., vol. 140, pp. 655–667, 2016. DOI: https://doi.org/10.1016/j.compstruct.2016.01.001.
- T. Yu, S. Yin, T.Q. Bui, C. Liu, and N. Wattanasakulpong, Buckling isogeometric analysis of functionally graded plates under combined thermal and mechanical loads, Compos. Struct., vol. 162, pp. 54–69, 2017. DOI: https://doi.org/10.1016/j.compstruct.2016.11.084.
- X. Li, J. Zheng, T.W. Sederberg, T.J. Hughes, and M.A. Scott, On linear independence of T-spline blending functions, Comput. Aided Geom. Des., vol. 29, no. 1, pp. 63–76, 2012. DOI: https://doi.org/10.1016/j.cagd.2011.08.005.
- S.H. Habib and I. Belaidi, Crack analysis in bi-material interfaces using T-spline based XIGA, Theor. Appl. Fract. Mech., vol. 55, no. 1, pp. 55–68, 2017.
- G. Bhardwaj, I.V. Singh, B.K. Mishra, and V. Kumar, Numerical simulations of cracked plate using XIGA under different loads and boundary conditions, Mech. Adv. Mater. Struct., vol. 23, no. 6, pp. 704–714, 2016. DOI: https://doi.org/10.1080/15376494.2015.1029159.
- S.K. Singh, I.V. Singh, B.K. Mishra, G. Bhardwaj, and T.Q. Bui, A simple, efficient and accurate Bezier extraction based T-spline XIGA for crack simulations, Theor. Appl. Fract. Mech., vol. 88, pp. 74–96, 2017. DOI: https://doi.org/10.1016/j.tafmec.2016.12.002.
- S. Yin, T. Yu, T.Q. Bui, X. Zheng, and S. Gu, Static and dynamic fracture analysis in elastic solids using a multiscale extended isogeometric analysis, Eng. Fract. Mech., vol. 207, pp. 109–130, 2019. DOI: https://doi.org/10.1016/j.engfracmech.2018.12.024.
- S.K. Singh and I.V. Singh, Analysis of cracked functionally graded piezoelectric material using XIGA, Eng. Fract. Mech., vol. 230, pp. 107015, 2020. DOI: https://doi.org/10.1016/j.engfracmech.2020.107015.
- A. Jameel and G.A. Harmain, A coupled FE-IGA technique for modeling fatigue crack growth in engineering materials, Mech. Adv. Mater. Struct., vol. 26, no. 21, pp. 1764–1775, 2019. DOI: https://doi.org/10.1080/15376494.2018.1446571.
- H. Bayesteh, A. Afshar, and S. Mohammdi, Thermo-mechanical fracture study of inhomogeneous cracked solids by the extended isogeometric analysis method, Eur. J. Mech. A Solid, vol. 51, pp. 123–139, 2015. DOI: https://doi.org/10.1016/j.euromechsol.2014.12.004.
- Y. Murakami, Stress Intensity Factors, Handbook, Pergamon Press, Oxford, 1987.
- J.A. Cottrell, T.J.R. Hughes, and Y. Bazilevs, Isogeometric Analysis: Toward Integration of CAD and FEA, Wiley, United Kingdom, 2009.
- A. Jameel and G.A. Harmain, Extended iso-geometric analysis for modeling three-dimensional cracks, Mech. Adv. Mater. Struct., vol. 26, no. 11, pp. 915–923, 2019. DOI: https://doi.org/10.1080/15376494.2018.1430275.
- W.A. Wall, M.A. Frenzel, and C. Cyron, Isogeometric structural shape optimization, Comput. Methods Appl. Mech. Eng., vol. 197, no. 33–40, pp. 2976–2988, 2008. DOI: https://doi.org/10.1016/j.cma.2008.01.025.
- A. Yadav, R.K. Godara, and G. Bhardwaj, A review on XIGA method for computational fracture mechanics applications, Eng. Fract. Mech., vol. 230, pp. 107001, 2020. DOI: https://doi.org/10.1016/j.engfracmech.2020.107001.
- G.C. Sih, On the singular character of thermal stresses near a crack tip, J. Appl. Mech., vol. 29, no. 3, pp. 587–589, 1962. DOI: https://doi.org/10.1115/1.3640612.
- L. Banks-Sills and O. Dolev, The conservative M-integral for thermal-elastic problems, Int. J. Fract., vol. 125, no. 1, pp. 149–170, 2004. DOI: https://doi.org/10.1023/B:FRAC.0000021065.46630.4d.
- N. Sukumar, Z.Y. Huang, J.H. Prevost, and Z. Suo, Partition of unity enrichment for bi-material interface cracks, Int. J. Numer. Methods Eng., vol. 59, no. 8, pp. 1075–1102, 2004. DOI: https://doi.org/10.1002/nme.902.
- F. Erdogan and G.C. Sih, On the crack extension in plates under plane loading and transverse shear, ASME J. Basic Eng., vol. 85, no. 4, pp. 519–527, 1963. DOI: https://doi.org/10.1115/1.3656897.
- S.K. Singh, I.V. Singh, B.K. Mishra, and G. Bhardwaj, Analysis of cracked functionally graded material plates using XIGA based on generalized higher-order shear deformation theory, Compos. Struct., vol. 225, pp. 111038, 2019. DOI: https://doi.org/10.1016/j.compstruct.2019.111038.
- E.E. Gdoutos, Problems of Mixed Mode Crack Propagation, Springer Science & Business Media, 2012.
- H. Pathak, A. Singh, I.V. Singh, and S.K. Yadav, Fatigue crack growth simulations of 3-D linear elastic cracks under thermal load by XFEM, Front. Struct. Civ. Eng., vol. 9, no. 4, pp. 359–382, 2015. DOI: https://doi.org/10.1007/s11709-015-0304-z.